• 한국철도학회논문집
• /
• 제14권1호
• /
• pp.11-18
• /
• 2011

본 논문은 열차의 타고오름 해석을 위한 새로운 2차원 다물체 동역학 모델링 방법을 제안하였다. 본 동역학 모델은 에너지 흡수구조/부품뿐만 아니라 차체의 변형도 고려하여 비선형 스프링, 댐퍼, 질량으로 구성되며 철도차량의 충돌에너지흡수량, 승객구간의 가속도, 연결 장치의 충격력, 차량간 타고오름 변위 등을 잘 예측할 수 있다. 제안된 방법으로 한국형고속열차를 차체 각 부분의 압괴 특성을 구하고 2차원 다물체 충돌동역학 모델을 구성하였다. 열차 대 열차 충돌 시나리오조건으로 2차원 동역학 모델을 시뮬레이션하고 3차원 가상시험 모델로 평가하였다. 그 결과 2차원 동역학 모델은 타고오름 거동을 잘 예측하였으며 차체변형을 고려한 모델링 기법이 타고오름 평가에 중요함을 확인하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.176-183
• /
• 2006

A novel intelligent anti-collision decision-making supporting system is addressed in this paper. To obtain precise anti-collision information capability, an innovative neurofuzzy network is proposed and applied. A fuzzy set interpretation is incorporated into the network design to handle imprecise information. A neural network architecture is used to train the parameters of the Fuzzy Inference System (FIS). The learning process is based on a hybrid learning algorithm and off-line training data. The training data are obtained by trial manoeuvre. This neurofuzzy network can be considered to be a self-learning system with the ability to learn new information adaptively without forgetting old knowledge. This supporting system can decrease ship operators' burden to deal with bridge data and help them to make a precise anti-collision decision.

• 한국철도학회논문집
• /
• 제4권3호
• /
• pp.94-101
• /
• 2001

One of the best methods to evaluate crashworthiness of a full rake trainset is to analyse 1-dimensional dynamic model using dampers, nonlinear springs and bars, and masses. In this study, the crashworthiness of KHST has been evaluated by analysing a nonlinear dynamic model made up of springs/bars-dampers-masses. The numerical results show that the KHST can absorb more kinetic energy at lower impact forces and lower accelerations in case of heavy collisions, if compared with KTX. Also, the KHST can be protected from any damage in its car-body and electric components except the energy absorbing tube in case of light collisions, like train-to-train accidents at speed under 8 kph. On the other hand, the KTX may be more damaged in the light collisions because there is no energy absorbing tube.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1387-1389
• /
• 2000

Railway signalling system is required to be high safety against collision, derailment and collision at level crossing and to be high availability. The signalling system is usually divided into automatic train control, interlocking and centralized traffic control systems and each system must be high fail safe and availability. This study focused on reliability calculation of vital systems in train control system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.300-304
• /
• 2006

The purpose of this paper is to simulate the collision between a KHST 3D model and an oblique truck and to investigate zigzagging phenomenon. The used train model is the deformable KHST 3D model, its velocity is 110kph, and the angle of the truck is 30 degree. In order to check lateral forces between wheels and rails, the KEYWORDs that LS_DYNA provides, *RAIL_TRACK and *RAIL_TRAIN are used.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.145-153
• /
• 2011

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important to enable organic movement between trains. In the case of the system such as RF-CBTC (Radio Frequency Communication Based Train Control) the control related information is sent through wireless transmission between on-board system of a train and wayside transmitter. The wayside transmitter collects the running information such as location, velocity from the on-board system and operates the optimizing control by sending the control information such as the target, limited velocity to the on-board system. But, when the communication disconnect or train failure, the critical hazard such as train collision or derailment may be possible because the RF-CBTC depends on the information through wireless communication. This paper discribes of performing Fall-Back system to detect train position in the case of rail break or communication failure to avoid train accident and allows train to be operated safely. It can be implemented with ATP function through track circuits using active-type transformers and axle counters, and allows train to be operated manually in emergency status.

• 전산구조공학
• /
• 제29권1호
• /
• pp.40-45
• /
• 2016

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 춘계학술대회 논문집
• /
• pp.33-44
• /
• 2006

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1112-1117
• /
• 2010

The intelligent safety system for level crossing which employs information and communication technology has been developed in USA and Japan, etc. But, in Korea, the relevant research has not been performed. In this paper, we analyze the cause of railway level crossing accidents and the inherent problem of the existing safety equipments. Based on analyzed results, we design the intelligent safety system which prevent collision between a train and a vehicle. This system displays train approaching information in real-time at roadside warning devices, informs approaching train of the detected obstacle in crossing areas, and is interconnected with traffic signal to empty the crossing area before train comes. Especially, we present the video based obstacle detection algorithm and verify its performance with prototype H/W since the abrupt obstacles in crossing areas are the main cause of level crossing accidents. We identify that the presented scheme detects both pedestrian and vehicle with good performance. Currently, we demonstrate developed railway crossing intelligence system at one crossing of Young-dong-seon line of Korail with Sea Train cockpit.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1321-1326
• /
• 2008

According to the conventional train control system, the area of each train is detected by plural track circuits located in a constant distance on railway lines in order to control a distance between trains. The conventional train control system has the difficulty in making use of the substructure thoroughly and transmitting enormous amount of information. To solve those problems, the wireless CBTC system has been a global issue. To apply wireless CBTC system to train system, the following two requirements are preferentially necessary: (1) Dualizing wireless CBTC system to control trains ceaselessly in a system accident, (2) Improving dependency of transmitted information for location and velocity to protect collision and derailment of lightweight trains in advance.