• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.228-238
• /
• 2003

We believe that existing wire solutions such as HomePNA2.0 using phone lines and HomePlug using power line and wireless solution such as HomeRF are the most promising solutions, because of its cost-effectiveness. However, MAC protocols of these solutions provide only Class of Service(CoS) using priority mechanism like HomePNA and HomePlug or consider only voice among real-time traffics like HomeRF. For these reasons, we perceive the needs of the new MAC protocol which is no new wire solution and provides guaranteed Quality of Service (QoS) for not only voice but also video and audio. In light of this, we present the design and software implementation of a new MAC protocol for Home Networks. Our evaluation results of software implementation verify that proposed MAC protocol can provide low delay, low loss, and low jitter to real-time traffic by reserving bandwidth.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.1
• /
• pp.56-64
• /
• 2016

This study analyzed characteristics of officers' watch-keeping during fishing operation at the fisheries training ship KAYA (GT: 1,737 tons, Pukyong National University). It observed fishing works of three officers in wheel house of KAYA. The observations were carried out at the fishing ground 45 miles away from east of Jeju from 7 to 8 January 2010. The works and movements of the officers were recorded with three common video cameras and a 4-channel MPEG-4 Triplex DVR. Recorded data of the working circulation was analyzed by using the post-processing method. As a result of the traffic lines, the average (${\pm}S.D$) of working hour (min) and moving frequency (times), distance (m) and speed (m/min) during setting the net was 11.8 (0.9), 43.7 (8.1), 133.9 (35.8) and 10.5 (0.6), respectively. During trawling the net, it was 100, 241 (39.8), 615.7 (194.6) and 5.2 (1.6), respectively. During hauling the net, it was 17.6 (1.4), 41.0 (7.2), 196.9 (37.6) and 10.7 (0.8), respectively. In addition, it has a different tendency of the instrument usage frequency by the fishing works. During setting, the usage priority was CCTV, ECDIS, RPM and pitch controller, net monitor, GPS plotter, chart room, X-band radar, fish finder and public addressor. During trawling, it was CCTV, ECDIS, fish finder, X-band radar, net monitor, chart room, GPS plotter, RPM and pitch controller, auto pilot and steering, interphone, wind speed and direction indicator, No.1. VHF, navigation light control panel and public addressor. During hauling, it was CCTV, RPM and pitch controller, GPS plotter, public addressor, chart room, net monitor, X-band radar, auto pilot and steering and fish finder.

• Korean Journal of Optics and Photonics
• /
• v.25 no.5
• /
• pp.239-244
• /
• 2014

Retro-reflectors have been used for a wide range of applications such as traffic safety, special blinds, optical devices, etc. We analyzed the characteristics of the reflected light of a strap retro-reflector as a function of incidence angle. It is expected that various solar control structures may be designed more quantitatively using the characteristic chart we have prepared.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.367-372
• /
• 2016

In a modern smart building, sensors can detect various physical conditions, such as temperature, humidity, sound, motion, and light, which can be used in medical services and security, and for energy savings. This paper presents an efficient elevator scheduling system that utilizes smart sensor technologies with radio-frequency identification, video, and floor sensors to detect the arrival of elevator users in advance. The detected information is then delivered to the elevator scheduling system via building networks. By using this information, the proposed system makes a reservation call for efficient control of the elevator's direction and time. Experiments under a spectrum of traffic conditions show that the proposed system performs better than a legacy system with respect to average wait time, maximum wait time, and energy consumption.

• Journal of recreation and landscape
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2018

This study is about the investigation of the walking environment of the First Experimental Elementary School in Shapingba District of Chongqing City and the Zaozilanya Elementary School in Yuzhong District and the analysis of the pedestrian's consciousness. The improvement plan is obtained by comparing and analyzing the walking environment around the school. The survey results are as follows. According to the survey results of the walking environment around the school, the sidewalks of the two schools are relatively narrow, and there are more pedestrians crossing the road. There is a phenomenon of parking in both schools. The phenomenon of parking in Zaozilanya Elementary School is even more serious. In investigating the most important elements of the school's pedestrian environment, the setting of the signpost, the setting of the crosswalk and signal lights, the setting of the fence, the setting of the vehicle's deceleration facilities, and the control of the school gate are all necessary. Therefore, in order to create a safe and comfortable improvement plan for the surrounding environment of the school, first of all, in the improvement of the facilities around the school, the setting of the fence, the setting of the speed bump, the improvement of the crosswalk and the signal light. Second, in terms of restrictions, the scope of protection around the school needs to be expanded, and restrictions on parking and restrictions on vehicle traffic need to be implemented. Third, in terms of education and publicity, it is not only necessary to provide safety guidance for students to go to school, but also to provide drivers with driving safety education and publicity.

• Journal of the Korean Institute of Gas
• /
• v.19 no.3
• /
• pp.38-43
• /
• 2015

For buried gas pipelines, cathodic protection system shall be installed to protect against corrosion. The surveys of pipe-to-soil potentials for the gas pipelines should be carried out at the test box more than once a year. In urban, the test box is usually located on the driveway, therefore, it is difficult to measure the potentials. That is, traffic control is needed when carrying out the measurements of the potentials on daytime, or measurements of pipe-to-soil potentials at the test box located on the driveway have to be carried out in the late night when the traffic is light. We have developed remote potential monitoring system using the solid reference electrode and the wireless communication technology for the purpose of removing above problems. We have installed the developed solid reference electrodes at a site and monitored the potentials by wireless communication. Measured potential values were transferred to the server in office and analyzed. We have found the pipe-to-soil potentials transferred to the web server make no difference to the potentials measured directly on the site.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.79-89
• /
• 2017

The purpose of this study is to analyze the current right-turn operation at signalized intersections and suggest appropriate right-turn operation strategy. From field investigation, right-turn signals have not only operated various type and shape, lacking of consistency, but also there was no clear regulations or standards. It could increase drivers' confusion and cause vehicle-to-pedestrian accidents. In order to improve pedestrian safety, there is urgent need to study the regulations and standards regarding to right-turn traffic control. This study suggests appropriate right-turn signal operation strategy. In case of permissive right-turn operation, it should be stated on regulations that red light means right-turn vehicles must stop temporarily at the stop line and then turn right. Necessary conditions for installing right-turn signal for protected operation are that there should have one or more exclusive right-turn lanes and right-turn signal face should contain the lenses with three-color arrow indication. In addition, we assort right-turn operation types as permissive, protected and protected/permissive right-turn and suggest specific signal operation strategy by the types.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.1
• /
• pp.38-53
• /
• 2007

In a seminal judgment of November 2002 (Case C-476/98) relating to the compatibility with Community laws of the 'nationality clause' in the 1996 amending protocol to the 1955 U.S.-German Air Services Agreement, the European Court of Justice(ECJ) decided that the provision constituted a measure of an intrinsically discriminatory nature and was thus contrary to the principle of national treatment established under Art. 52 of the EC Treaty. The Court, rejecting bluntly the German government' submissions relying on public policy grounds(Art. 56, EC Treaty), seemed content to declare and rule that the protocol provision requiring a contracting state party to ensure substantial ownership and effective control by its nationals of its designated airlines had violated the requirement of national treatment reserved for other Community Members under the salient Treaty provision. The German counterclaims against the Commission, although tantalizing not only from the perusal of the judgment but from the perspective of international air law, were nonetheless invariably correct and to the point. For such a clause has been justified to defend the 'fundamental interests of society from a serious threat' that may result from granting operating licenses or necessary technical authorizations to an airline company of a third country. Indeed, the nationality clause has been inserted in most of the liberal bilaterals to allow the parties to enforce their own national laws and regulations governing aviation safety and security. Such a clause is not targeted as a device for discriminating against the nationals of any third State. It simply acts as the minimum legal safeguards against aviation risk empowering a party to take legal control of the designated airlines. Unfortunately, the German call for the review of such a foremost objective and rationale underlying the nationality clause landed on the deaf ears of the Court which appeared quite happy not to take stock of the potential implications and consequences in its absence and of the legality under international law of the 'national treatment' requirement of Community laws. Again, while US law limits foreign shareholders to 24.9% of its airlines, the European Community limits non-EC ownership to 49%, precluding any ownership and effective control by foreign nationals of EC airlines, let alone any foreign takeover and merger. Given this, it appears inconsistent and unreasonable for the EC to demand, $vis-{\grave{a}}-vis$ a non-EC third State, national treatment for all of its Member States. The ECJ's decision was also wrongly premised on the precedence of Community laws over international law, and in particular, international air law. It simply is another form of asserting and enforcing de facto extraterritorial application of Community laws to a non-EC third country. Again, the ruling runs counter to an established rule of international law that a treaty does not, as a matter of principle, create either obligations or rights for a third State. Aside from the legal problems, the 'national treatment' may not be economically justified either, in light of the free-rider problem and resulting externalities or inefficiency. On the strength of international law and economics, therefore, airlines of Community Members other than the designated German and U.S. air carriers are neither eligible for traffic rights, nor entitled to operate between or 'free-ride' on the U.S. and German points. All in all and in all fairness, the European Court's ruling was nothing short of an outright condemnation of established rules and principles of international law and international air law. Nor is the national treatment requirement justified by the economic logic of deregulation or liberalization of aviation markets. Nor has the requirement much to do with fair competition and increased efficiency.

• Korean Security Journal
• /
• no.24
• /
• pp.91-123
• /
• 2010

The threat factors available for occurrence given G20 Summit Meeting are expected leader terrorism, hostage terrorism, bomb terrorism, public facilities terrorism, and aircraft terrorism. As for the threat groups, which are expected in Korea, the North Korea, Islam extremist group, and the group such as NGO organization of being opposed to international meeting are regarded as having possibility of causing hazard. Thus, the purpose of this study is to suggest VIP Security-measure plans in the main site in preparation for G20 Summit Meeting. Accordingly, each country in the world is adopting 'the principle of Triple Ring' in common. Thus, it elicited a coping plan by 1st line(inner ring) 2nd line(middle ring) 3rd line(outer ring) based on this principle, and proposed even an opinion together that will need to be reflected in light of policy for the VIP security measures. In conclusion, as for the VIP Security-measure plans in the main site in preparation for G20 Summit Meeting, In the inner ring(safety sector), first, an intercepting measure needs to be devised for a spot of getting into and out of vehicles given the Straight Street. Second, the Walking Formation needs to be reinforced boldly in the exposed area. In the middle ring(security sector), first, the control plan needs to be devised by considering particularity of the main site. Second, there is necessity for adopting the efficient security badge operation plan that is included RFID function within security badge. In the outer ring(aid protective sector), first, there is necessity of preparing for several VIP terrorisms, of collecting information and intelligence, and of reinforcing the information collection system against terrorism under the cooperation with the overseas information agency. Second, the urgent measure training in time of emergency needs to be carried out toward security agent event manpower. Third, to maintain the certain pace in VIP motorcade, the efficient traffic control system needs to be operated. Finally, as for what will need to be reflected in light of policy for VIP security measures, first, there is necessity for allowing VIP residence to be efficiently dispersed to be distributed and controlled. Second, there is necessity for allowing impure element to misjudge or attack to be failed by utilizing diverse deception operations. Third, according to the reorganization in North Korea's Organization of the South Directed Operations, the powerful 'military-support measure' needs to be driven from this G20 Summit Meeting. For this, the necessity was proposed for further reinforcing the front back defense posture under the supervision of the Ministry of National Defense and for positively coping even with detecting and removing poison in preparation for CBR (chemical, biological, and radio-logical) terrorism.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.457-466
• /
• 1999

원자력 발전소 계측 제어 시스템, 의료 관련 시스템, 항공 관련 시스템 등 실생활과 밀접한 시스템에 소프트웨어의 사용이 점차 증가하고 있다. 이러한 시스템에서 소프트웨어의 오류는 예기치 않는 사고를 유발하여 인명, 재산상의 심각한 타격을 줄 수 있다. 그러므로 고신뢰도 소프트웨어의 개발 시에는 반드시 시스템의 안전성을 보장해 주어야 한다. 역방향 안전성 분석 방법은 시스템의 안전성을 분석하는 한가지 방법으로서 시스템의 위험 상태를 정의하고 그 위험의 원인들을 추적, 분석함으로써 안전성에 대한 효율적인 분석을 수행할 수 있는 장점을 갖는다. 이 논문에서는 소프트웨어 개발 초기 단계에서 안전성을 분석할 수 있는 방법으로 Colored Petri Nets(CPN)에 기반을 둔 역방향 안전성 분석 방법을 제시한다. 또한 CPN 역방향 안전성 분석 도구인 SAC(Safety Analyzer for CPN)의 설계 및 구현에 대해 언급한다. SAC은 기존의 상용 CPN 모델링 도구인 Design/CPN과 연계하여 사용될 수 있으므로 CPN으로 모델링된 시스템의 안전성을 분석할 수 있다는 장점이 있다. 이 논문에서는 예제로 자동 교통 제어 시스템의 일부를 CPN으로 모델링하고 SAC을 이용한 분석 과정을 기술한다.Abstract In safety-critical systems such as nuclear power plants, medical machines, and avionic systems which are closely related with our livings, the usage of software in the controlling part is growing rapidly. Since software errors in safety-critical systems may cause serious accidents leading to financial or human damages, system safety should be ensured during and after development of a system. A backward safety analysis technique defines system hazards and tries to trace their causes by analyzing system states backward. In this paper, we provide a backward safety analysis technique based on Colored Petri Nets(CPN), which is applicable to the early software development phase. Also Safety Analyzer for CPN(SAC), the supporting tool, is designed and implemented. Since SAC is compatible with Design/CPN, a commercial tool for supporting CPN, it can be applicable to analyze safety in practical problems. As an example, we model a part of the traffic light control system using CPN and analyze safety properties of the model using the SAC tool.