• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.97-104
• /
• 2015

The pollution of particulate matter (PM) is considered one of the hot socioenvironmental issues at present time. In this study, we investigated the distribution of fine particulate matter ($PM_{2.5}$) in Wangsimni commercial areas in Seoul, Korea to learn more about its environmental behavior in an urban area. Our analysis of $PM_{2.5}$ was made to distinguish the $PM_{2.5}$ pollution levels between three different types of site characteristics: (1) densely populated area, (2) thinly populated area, and (3) traffic roadside. Moreover, to assess the temporal trends in our study, the concentration levels of $PM_{2.5}$ were also compared between weekdays and weekends and between early in the afternoon and evening. The average concentration of $PM_{2.5}$ from densely and thinly populated areas were measured as $36.0{\pm}13.1$ and $32.3{\pm}11.2{\mu}g/m^3$, respectively. If the results are compared between different time bands, there were apparent differences between weekdays ($29.6{\pm}10.8{\mu}g/m^3$) and weekends ($36.9{\pm}12.1{\mu}g/m^3$). Such difference was also evident between noon ($27.8{\pm}5.8{\mu}g/m^3$) and evening ($38.3{\pm}13.7{\mu}g/m^3$). According to our research, concentration of $PM_{2.5}$ in the study area was affected more sensitively by time zone rather than the population density. The measurement data was also analyzed by drawing concentration map of $PM_{2.5}$ in the Wangsimni commercial areas based on data contouring method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.409-416
• /
• 2011

A mobile emission laboratory (MEL) was designed to measure the amount of traffic pollutants with high temporal and spatial resolution under real conditions. Equipment for gas-phase measurements of quantity of CO, NOx, $CO_2$, and THC and for the measurement of the number density and size distribution of fine and ultra-fine particles by a FMPS and a CPC were placed in a mini-van. The exhaust of different type of vehicles can be sampled by MEL. This paper describes the construction and technical details of the MEL and presents data from the experiment in which a car chases city buses fuelled by diesel, CNG, and LPG. The diameters of most particles in the exhaust of the diesel city bus were less than 300 nm and most of the particles had a diameter of 30-60 nm. However, most particles in the exhaust of the CNG and LPG city buses were nanoparticles (diameter: less than 50 nm).

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.165-173
• /
• 2015

This paper presents numerical results of static structural stability analysis in development of a vertical transfer device of a PRT(Personal Rapid Transit) vehicle. The vertical transfer of a fully occupied vehicle operating on a road network is the first attempt, which is expected to contribute to overcome the limitations of conventional 2-dimensional operation mode. In particular, the vertical transfer apparatus designed based on vertical circulating conveyors is capable of continuous transfer without time delay so that it enables to accommodate a high traffic density. This system has been frequently used in a logistics field; however, it is essential to assess a structural integrity because an external force by a vehicle weight is exerted on the conveyors in the form of a concentrated load unlike a conventional logistic transport. In this study, prior to the production process, the structural performance of the pilot design in an early stage is numerically evaluated using the commercial finite element method (FEM) solver (i.e., $Ansys^{(R)}$).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1195-1207
• /
• 2012

Fast and reliable message broadcasting is critical for safety critical applications of VANET due to the urgency and/or significance of the messages for passengers and drivers. For reliable message delivery, a mechanism for checking the reception of message at the neighboring vehicles and retransmitting it if necessary is required. Especially, in urban environments, where the traffic density tends to be high, mechanisms that minimize control message overhead such as beacon are appropriate in order to minimize the message collisions. Furthermore, broadcast delivery is especially difficult at the intersection due to the road side obstacles such buildings, and hence, a mechanism that enables effective and efficient delivery across intersections is required. In this paper, we propose a beaconless reliable and efficient broadcast approach which specifically taking into account the urban streets. The proposed approach checks the message reception of neighboring vehicles implicitly by taking into account the broadcast of message by next vehicle as the acknowledgement. When retransmissions is necessary around the intersections, vehicles located within the intersection area, where the chance of successful signal propagation toward every branch of the intersection is higher due to less signal attenuation caused by road side obstacles, are to do the retransmissions. Simulation results show that the proposed approach can provide better reliability while consume less resources than the existing approaches.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.235-246
• /
• 2014

In the late 1980s, 5 new towns such as Bundang, Ilsan, Pyeongchon, Sanborn, Jungdong were constructed to solve housing problems and to disperse functions concentrated within Seoul. As the city got matured, it began to appear the initial signs of urban problems such as aging of high rise-density apartment sites, traffic congestion, lack of parking spaces and aging of infrastructure. Therefore, in order to cope with urban problems, it is very important to apprehend the process of urban growth, its change and the feature of physical/human elements. So, the purpose of this thesis is to analyze the changes in housing and population characteristics for past 20 years by use of Census data from 1995 to 2010. First, the new town's goal of population and housing plan at the time of construction was analyzed how it was achieved, and it is close to the performance of the goal. And the trend of changes in the population and household characteristics was analyzed by every five year's data. As the result of analysis, it shows socio-demographic changes such as aged and elderly population growth, rapid increase in one generation's household and single person household, highly educated city, monthly rent household's increase and charter household's reduction. Results of this analysis can be utilized to aforethought management of new towns. But it is required more sustained and systematic urban monitoring and data analysis because the one-off analysis of the city's characteristics alone is difficult enough to grasp them.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.136-149
• /
• 2011

Large portion of the domestic bridges are slab bridges reflecting the geographical characteristic of the country, where exists lots of inclines and small winding brooks. Many of the slab bridges are damaged and superannuated as they become obsolete. Deterioration is accelerated when the traffic density becomes large and heavy vehicles pass frequently. A strengthening method for deteriorated slab bridges was studied in this work. The examined net-type strengthening method uses both longitudinal and transverse prestressing for strengthening. In this way, the deflection at the center of the slab can be better controlled, and consequently, the slab is more efficiently strengthened. Three slab specimens were fabricated for the experimental test and subjected to three different loading conditions, and the load bearing capacities and deflections of slabs were examined. Flexural stiffness of slabs increased by 30.7~107.3%, and deflection of slabs decreased by 27.6~52.2% after net-type strengthening. The net-type prestressing is efficient to the strengthening for the center of a slab, and its efficiency is also valid under eccentric loadings. Since extra prestress forces can be added in the future, if necessary, the net-type strengthening system is advantagous for the maintenance and repair of slab bridges.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.24-30
• /
• 2008

In this paper we analyze the performance of an adaptive sector cell system, which is adopted to maintain the traffic balance between sectors and to utilize the cell resources effectively, using the data collected from real channel environments. In the data measurements, we transmitted the QPSK modulated signal with carrier frequency of 1.95GHz and received the signals using the 8x4 array antenna equipped on the top of buildings in the urban area. We analyzed the angular distribution and the delay spread of a user signal and analyzed angular distribution of mobile users in a cell using the collected data. Also, we propose the vector channel modeling using the estimated pdf(probability distribution function) of the analyzing results. Through the proposed channel modeling the improvement of the call blocking rate was analyzed when using the adaptive sector cell system, and computer simulations show that the call blocking rate of the adaptive sector cell system was much lower than that of the fixed sector cell system. Additionally, it shows that the call blocking rate increases severely in the fixed sector cell system while the difference of the call blocking rate was smaller in the adaptive sector cell system, as the user density of the spatial distribution increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.637-646
• /
• 2012

Recently, Wireless Sensor Networks (WSNs) are used in many applications. When sensor nodes are deployed on special areas, where humans have any difficulties to get in, the nodes form network topology themselves. By using the sensor nodes, users are able to obtain environmental information. Due to the lack of the battery capability, sensor nodes should be efficiently managed with energy consumption in WSNs. In specific applications (e.g. in intrusion detections), intruders tend to occur unexpectedly. For the energy efficiency in the applications, an appropriate algorithm is strongly required. In this paper, we propose tree-based routing algorithm for the specific applications, which based on the intrusion detection. In addition, In order to decrease traffic density, the proposed algorithm provides enhanced method considering link cost and load balance, and it establishes efficient links amongst the sensor nodes. Simultaneously, by using the proposed scheme, parent and child nodes are (re-)defined. Furthermore, efficient routing table management facilitates to improve energy efficiency especially in the limited power source. In order to apply a realistic military environment, in this paper, we design three scenarios according to an intruder's moving direction; (1) the intruder is passing along a path where sensor nodes have been already deployed. (2) the intruders are crossing the path. (3) the intruders, who are moving as (1)'s scenario, are certainly deviating from the middle of the path. In conclusion, through the simulation results, we obtain the performance results in terms of latency and energy consumption, and analyze them. Finally, we validate our algorithm is highly able to adapt on such the application environments.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2000

The ships over the certain navigation area or her length are required to carry charts under the relevant laws. Charts are indispensible to the ships and fishing vessel, because their crew should know the water depth and location of obstacle in order to avoid danger in the navigation and fishing area. But it was found that many ships do not carry proper charts onboard according to the research marine accidents files of marine accident inquiry agency, and questionnaire survey. Consequently, many ships run aground on the coast and port. This study examined the present status of the coastal ship and the fishing vessels, and explained some problems in the aspect of the covering area, the place, the number of the selling agent and adjoining chart, as well as the geographical and traffic density, the crew on board the ship's characteristics, and so on. In this study we propose the way to solve the problem. firstly, the category of the fishing vessel which should carry the chart on bard under the related laws are required to be lowered to 10 gross tons. Besides a ship inspector should examine if the charts covering the area where to navigate even when the temporary inspection is done are carried on board property. Secondly, the inspection body or the controlling office of ship's entry and departure should check throughly whether the ships concerned carry the chart on board. Thirdly the fishing vessels should used the fishing charts, and the body concerned should train the offices about how to use chart, especiany the difference between Tokyo datum and WGS-84 datum. Fourthly the customized chart such as an atlas like a map, a calenda-type chart, a small chart, as a coated chart needs to be publish for the safety of small ship and fishing vessel. Fifthly, it is advisable to draw a recommended course in the route where the coastal navigate mainly and in the narrow channel, The adjoining area should be improved, as well as the qualify of the chart paper. Sixthly, publication of additional new chart in the southern part of East Sea, the eastern part of South Sea, the western part of South Sea and middle part of Yellow Sea near Incheon port should be thought over. Seventhly, the number of chart selling agent should be increased for the sake of purchaser in proportion to the number of port, and small correction of charts in selling agent must be carried out completely.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.263-268
• /
• 2016

A rapid increase of data amount, used in ship-to-ship transmission of safety and logistics information, ships in the inland sea have trouble transmitting real-time information transmission due to an increase in traffic load caused by data transmitted by land station and offshore ships. In this study, therefore, communication is carried out by adaptively controlling the detailed beam width based on the distribution of offshore ships in land station durable in marine environment. Then after the adaptive sector system enabling real-time communication support between ships concentrated in an inland sea and land station is applied, the performance verification is conducted based on the respective Call Blocking Rates of an omnidirectional antenna, fisted sector system, and adaptive sector system. The performance verification result shows that adaptive sector system has better performance than the fixed sector system as the density of ship, q value, increases, and that the smaller the beam width is, the better performance of adaptive sector system will be.