• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.736-741
• /
• 2005

The highly popular algorithm to determine routing path for the multi-hopping wireless sensor network is DSR(Dynamic Source Routing), which is one of the Demand-Driven way to makes the route only when there is a request for sending data. However, because DSR attaches the route's record on the sending packet, the bigger number of sensor node is, the heavier packet in DSR becomes. In this paper, we try to propose the new optimal routing path selecting algorithm which does not make the size of packet bigger by using proper routing table even though the number of sensor node increases, and we try to show our algorithm is more stable and reliable because it is based on the cost function considering some network resources of each sensor node such as power consumption, mobility, traffic in network, distance(hop) between source and destination.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1215-1221
• /
• 2009

A novel approach for electrocardiogram (ECG) analysis within a functional sensor node has been developed and evaluated. The main aim is to reduce data collision, traffic overload and power consumption in healthcare applications of wireless sensor networks(WSN). The sensor node attached on the patient's body surface around the heart can perform ECG analysis based on a QRS detection algorithm to detect abnormal condition of the patient. Data transfer is activated only after detected abnormality in the ECG. This system can reduce packet loss during transmission by reducing traffic overload. In addition, it saves power supply energy leading to more reliable, cheap and user-friendly operation in the WSN for ubiquitous health monitoring.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.61-77
• /
• 2017

The most challenging issues in the multi-channel MAC of the IEEE 1609.4 standard is how to handle the dynamic vehicular traffic condition with a high mobility, dynamic topology, and a trajectory change. Therefore, dynamic channel coordination schemes between CCH and SCH are required to provide the proper bandwidth for CCH/SCH intervals and to improve the quality of service (QoS). In this paper, we use a Markov model to optimize the interval based on the dynamic vehicular traffic condition with high mobility nodes in the multi-channel MAC of the IEEE 1609.4 standard. We evaluate the performance of the three-dimensional Markov chain based on the Poisson distribution for the node distribution and velocity. We also evaluate the additive white Gaussian noise (AWGN) effect for the multi-channel MAC coordination scheme of the IEEE 1609.4 standard. The result of simulation proves that the performance of the dynamic channel coordination scheme is affected by the high node mobility and the AWGN. In this research, we evaluate the model analytically for the average delay on CCHs and SCHs and also the saturated throughput on SCHs.

• Journal of Internet Computing and Services
• /
• v.19 no.2
• /
• pp.33-41
• /
• 2018

In recent years, technology is rapidly changing to support new service consumption and distribution models in multimedia service systems and hybrid delivery of media services is a key factor for enabling next generation multimedia services. This phenomenon can lead to rapidly increasing network traffic and ultimately has a direct and aggravating effect on the user's quality of service (QOS). To address the issue, we propose a novel system architecture to provide smart hybrid media services efficiently. The architecture is designed to apply the software-defined networking (SDN) method, detect changes in traffic, and combine the data, including user data, service features, and computation node status, to provide a service schedule that is suitable for the current state. To this end, the proposed architecture is based on 2-level scheduling, where Level-1 scheduling is responsible for the best network path and a computation node for processing the user request, whereas Level-2 scheduling deals with individual service requests that arrived at the computation node. This paper describes the overall concept of the architecture, as well as the functions of each component. In addition, this paper describes potential scenarios that demonstrate how this architecture could provide services more efficiently than current media-service architectures.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.291-299
• /
• 2016

To enhance network efficiency, named-data networking (NDN) implements data caching functionality on intermediate network nodes, and then the nodes directly respond to request messages for cached data. Through the processing of request messages in intermediate node, NDN can efficiently reduce the amount of network traffic, also solve network congestion problems near data sources. Also, NDN provides a data authenticate mechanism so as to prevent various Internet accidents caused from the absence of an authentication mechanism. Hence, through applying NDN to various smart IT convergence services, it is expected to efficiently control the explosive growth of network traffic as well as to provide more secure services. Basically, it is important factors of NDN which data is cached and where nodes caching data is located in a network topology. This paper first analyzes previous works caching content based on the popularity of the content. Then ii investigates the hitting rate of caches in each node of a network topology, and then propose an improved caching scheme based on the result of the analyzation. Finally, it evaluates the performance of the proposal.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.3
• /
• pp.137-153
• /
• 2009

In this paper, we present an analytic model that evaluates the performance of B-MAC protocol under contention transmission conditions of two senders in a single-hop wireless sensor network. Our model considers the impact of several important factors such as sleep cycle, the backoff mechanism and incoming traffic loads. After obtaining the service delay distribution of a sending node and expected delay of a receiving node, an iterative algorithm is presented for calculating the performance measures such as expected energy consumption usage per packet and latency. Simulation results show that the proposed analytic model can accurately estimate the performance measures under different traffic conditions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.1
• /
• pp.8-13
• /
• 2006

In mobile ad hoc networks, most of on demand routing protocols such as DSR and AODV do not deal with traffic load during the route discovery procedure. To achieve load balancing in networks, many protocols have been proposed. However, existing load balancing schemes do not consider the remaining available buffer size of the interface queue, which still results in buffer overflows by congestion in a certain node which has the least available buffer size in the route. To solve this problem, we propose a load balancing protocol called Dynamic Congestion Aware Routing Protocol (DCAR) which monitors the remaining buffer length of all nodes in routes and excludes a certain congested node during the route discovery procedure. We also propose two buffer threshold values to select an optimal route selection metric between the traffic load and the minimum hop count. Through simulation study, we compare DCAR with other on demand routing protocols and show that the proposed protocol is more efficient when a network is heavily loaded.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.130-131
• /
• 2007

Wireless Sensor Network typically incorporates diverse applications within the same network. A sensor node may have multiple sensors i.e. light, temperature, seismic etc with different transmission characteristics. Each application has different characteristics and requirements in terms of transmission rates, bandwidth, packet loss and delay demands may be initiated towards the sink. In this paper we propose Heterogeneous Traffic Oriented Rate Control Protocol (HTRCP) which ensures efficient rate control for diverse applications according to the priority specified by the sink. Moreover. HTRCP ensures the node priority based hop by hop dynamic rate adjustment for high link utilization.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.4
• /
• pp.248-256
• /
• 2009

In this paper, under saturated traffic condition in a single-hop wireless sensor network, we present an analytic model that evaluates the performance of asynchronous MAC protocol which uses a preamble technique. Our model considers the impact of several important factors such as sleep cycle, the backoff mechanism and the number of contending nodes. After obtaining the cumulative backoff time of a sending node and expected delay of a receiving node, an iterative algorithm is presented for calculating the performance measures such as expected energy consumption usage per packet and latency. Simulation results show that the proposed analytic model can accurately estimate the performance measures under saturated traffic conditions.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.367-376
• /
• 2003

This study deals with the DCMST (Delay constrained Capacitated Minimum Spanning Tree) problem applied in the topological design of local networks or finding several communication paths from root node. While the traditional CMST problem has only the traffic capacity constraint served by a port of root node, the DCMST problem has the additional mean delay constraint of network. The DCMST problem consists of finding a set of spanning trees to link end-nodes to the root node satisfying the traffic requirements at end-nodes and the required mean delay of network. The objective function of problem is to minimize the total link cost. This paper presents two-phased heuristic algorithm, which consists of node exchange, and node shift algorithm based on the trade-off criterions, and mean delay algorithm. Actual computational experience and performance analysis show that the proposed algorithm can produce better solution than the existing algorithm for the CMST problem to consider the mean delay constraint in terms of cost.