• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.771-776
• /
• 2017

LTE-R mobile communication technology based on LTE is used to supply various signal and exchange information required for safety operation of train on high speed railway communication system. In this paper, transmission performance of application traffic which is transferred on high speed communication based on LTE-R is analyzed. And some suggestions for application traffic transmission of high speed railway communication will be considered. Computer simulation is used to analyze performance of CBR, VBR as application traffic. Throughput, delay and packet loss rate is used as performance measurement and analysis parameters.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.2
• /
• pp.55-62
• /
• 2002

For my thesis I have analyzed the differences between the traffic noise level surrounding the schools and the perceived level of noise. 1 have used the ways of measurement and questionnaires to support my study. According to the analysis, the measured noise level was higher than the expected noise level. The equivalent noise level was proven to be higher when the windows of the classrooms were open. The noise level was also higher on the third floor than the first floor. The correlation between the measured noise level and the perceived level of noise was tested in each school. The school which had a higher expected noise level showed a high perceived level of noise. The measured noise level and the perceived level of noise became larger on the higher floors. Through the questionnaires, the traffic noises were proven to be the largest noise-making source surrounding the schools. Most of the students replied on the questionnaires that they have been consistently bothered by the noise. It interfered with their studies and concentration. Also, the sound of their voices became louder because of the noise around their schools. Therefore, I have come to the conclusion that the traffic noises that surround the schools give the students negative influences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1296-1304
• /
• 1999

In this paper, we propose an enhanced usage parameter control algorithm, which is one of the preventive traffic control method in ATM networks. Proposed algorithm is based on the cell loss priority bit in the ATM cell header. This algorithm can eliminate the measurement phasing problem in cell conformance testing in ATM networks. Proposed algorithm can minimize the cell loss ratio of high priority cell(CLP = 0) and resolve the burstiness of cells which may be introduced in traffic multiplexing and demultiplexing procedure. For the performance evaluation, we simulate the proposed algorithm with discrete time input traffic model, the results show that the performance of proposed algorithm is better than that of ITU-T usage parameter control algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.138-144
• /
• 2014

Now, Autonomous unmanned vehicle has become an issue in next generation technology. 2D Laser scanner as the distance measurement sensor is used. 2D Laser scanner detects the distance of 80m, measured angle is -5 to 185 degree. Laser scanner detects only the plane, but using motor swings. As a result, traffic signs detect and analyze patterns. Traffic signs when driving at low speed, shape of the detected pattern is very similar. By shaking the laser scanner, traffic signs and other obstacles became clear distinction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1881-1903
• /
• 2015

With the fast-developing of mobile terminals, positioning techniques based on fingerprinting method draws attention from many researchers even world famous companies. To conquer some shortcomings of the existing fingerprinting systems and further improve its performance, we propose a radio map building and updating technique, which is able to customize the spatial and temporal dependency of radio maps. The method includes indoor propagation and penetration modeling and the analysis of human traffic. Based on the combination of Ray-Tracing Algorithm, Finite-Different Time-Domain and Rough Set Theory, the approach of indoor propagation modeling accurately represents the spatial dependency of the radio map. In terms of temporal dependency, we specifically study the factor of moving people in the interest area. With measurement and statistics, the factor of human traffic is introduced as the temporal updating component. We improve our existing indoor positioning system with the proposed building and updating method, and compare the localization accuracy. The results show that the enhanced system can conquer the influence caused by moving people, and maintain the confidence probability stable during week, which enhance the actual availability and robustness of fingerprinting-based indoor positioning system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.282-294
• /
• 2002

The modern telecommunication networks are composed of various network-type and are managed by various management technologies, such as TMN, SNMP, TINA etc. Furthermore, the network user's needs of real-time multimedia services are rapidly increasing. In order to guarantee the user-requested quality-of-service(QoS) and keep the network utilization at maximum, it is required to manage the network performance continuously after the network is deployed. The performance management function should provide the useful information for the network expansion and the capacity reallocation in the future. In this paper, we propose a DPE-based performance management architecture for the integrated management of the heterogeneous network elements with TMN and SNMP. We propose an approach to provide the Intranet traffic monitoring and analysis function using layered network management concept and distributed processing technology. The proposed architecture has been designed and implemented based on multiprocess and multithread structure to support concurrent processing. To manage the traffic according to the Intranet service categories, we implemented an ITMA(Intelligent Traffic Monitoring Agent) with packet capture library. With the proposed architecture, we could measure and analyze the real Intranet traffic of Yeungnam University.

• Journal of Environmental Science International
• /
• v.15 no.8
• /
• pp.737-744
• /
• 2006

Present study was designed to characterize the concentrations of major roadside air pollutants in Daegu and to compare with those of Seoul and Busan. Evaluated were the exceedance frequence of mean concentrations of target compounds(CO, NO$_2$, O$_3$, PM$_{10}$, SO$_2$) and the relationship for time variation. Two air pollution monitoring stations(one roadside station and one residential station) in Daegu were selected for this study. In addition, one roadside monitoring station from each of Seoul and Busan was chosen for the comparison of Daegu monitoring stations. The data analyzed in the current study were collected from 1998 to 2000 by Daegu Regional Environmental Management Office. The roadside concentrations of NO2 and PM to and the exceedance frequency of ambient air standard levels in Daegu were higher than those of Seoul and Busan. Except 03, the roadside concentrations of all target compounds showed following three distinguished patterns; first, possibly due to increased traffic density, the concentrations increased from 0500 to 0900(LST), second, the concentrations decreased from 0900 to 1700(LST) possibly due to the increased wind velocity and decreased traffic density, and finally, increased traffic density, the concentrations increased again from 1700 to 2100(LST). An implication was that major air pollution sources shifted from residential area to road-area during rush hours.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.3
• /
• pp.193-201
• /
• 2002

For measuring a traffic symbolic confusion Quantity and symbolic air pleasantness, we use fuzzy sensor algorithm maded by symbolic information Quantity. Hut for implementation of fuzzy sensor, we use some symbolic information item, this method cannot produce precise output because we use vague fuzzy rule method and we cannot abundance fuzzy for precision of fuzzy rule method. For this reason, this paper introduce new fuzzy sensor algorithm composed of not fuzzy rule method but using Analytic Hierachy Process. To prove that new method is good, two type of fuzzy sensor applied to traffic signal controller and through much passing vehicle, two fuzzy sensor compared each other.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.9-16
• /
• 2007

Currently, the measurement of RF parameters for a base station in operation is typically limited to easily measured forward path items. In this paper, the forward monitoring ports of base stations are used to measure the reverse RF performance. The system has been implemented and effectiveness has been proven on an operating base station. The receiver sensitivity is measured using an internal CDMA modem which is used to monitor the output power based on closed loop power control when the modem is connected to the base station via a voice call. In order to improve accuracy, in addition to the modem Tx adjust(TxAdj) parameter, the detector's actual measurement is used. For accurate receiver sensitivity, the measurement should be made when there is no traffic which is not possible on an operating base station. Therefore, pilot channel chip energy to received signal power spectral density ratio$(E_c/I_o)$ compensation method is used to offset the receiver sensitivity degradation with voice traffic increase.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.923-928
• /
• 2003

This paper proposes a bottleneck link bandwidth measurement algorithm for reducing packet transmission delay within the grid network. There are two methods for measuring bottleneck link bandwidth：Packet Pair algorithm and Paced Probes algorithm. They measure bottleneck link bandwidth using the difference in arrival times of two paced probe packets of the same size traveling from the same source to destination. In addition, they reduce the influences of cross traffic by pacer packet. But there are some problems on these algorithms：it's not possible to know where bottleneck link occurred because they only focus on measuring the smallest link bandwidth along the path without considering bandwidth of every link on the path. So hop-by-hop based bottleneck link bandwidth measurement algorithm can be used for reducing packet transmission delay on grid network. Timestamp option was used on the paced probe packet for the link level measurement of bottleneck bandwidth. And the reducing of packet transmission delay was simulated by the solving a bottleneck link. The algorithm suggested in this paper can contribute to data transmission ensuring FTP and realtime QoS by detecting bandwidth and the location where bottleneck link occurred.