• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.331-334
• /
• 2005

This paper suggests the Ethernet aggregation to XGMII framing procedure (EAXFP) mechanism to economically combine the traffic adaptation technology with the link aggregation method in designing 10 Gigabit Ethernet (10 GbE) interfaces. This design sidesteps the data-loss issues that can result from designing an interface with only one link. The most critical issue in relation to the link aggregation interface is the algorithm used to control frame distribution between the ten ports. The proposed EAXFP mechanism offers an efficient link aggregation method as well as an efficient frame distribution algorithm, which maximize the throughout of the 10 GbE interface. In the experiment and analysis of the proposed mechanism, it was also discovered that the 10 GbE interface that uses the proposed EAXFP mechanism significantly reduced the packet loss rate. When there will be heavy traffic loads come about in the future, the proposed EAXFP mechanism assures an efficient and economical transmission performance on the router system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.3
• /
• pp.137-153
• /
• 2009

In this paper, we present an analytic model that evaluates the performance of B-MAC protocol under contention transmission conditions of two senders in a single-hop wireless sensor network. Our model considers the impact of several important factors such as sleep cycle, the backoff mechanism and incoming traffic loads. After obtaining the service delay distribution of a sending node and expected delay of a receiving node, an iterative algorithm is presented for calculating the performance measures such as expected energy consumption usage per packet and latency. Simulation results show that the proposed analytic model can accurately estimate the performance measures under different traffic conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1393-1405
• /
• 2017

It is well known that duty-cycling control by dynamically adjusting the polling interval according to the traffic loads can effectively achieve power saving in wireless sensor networks. Thus, there has been a significant research effort in developing polling interval adaptation schemes. Especially, Dynamic Low Power Listening (DLPL) scheme is one of the most widely adopted open-looping polling interval adaptation techniques in wireless sensor networks. In DLPL scheme, if consecutive idle (busy) samplings reach a given fixed threshold, the polling interval is increased (decreased). However, due to the trial-and-error based approach, it may significantly deteriorate the system performance depending on given threshold parameters. In this paper, we propose a novel DLPL scheme, called SDL (Sequential hypothesis testing based Dynamic LPL), which employs sequential hypothesis testing to decide whether to change the polling interval conforming to various traffic conditions. Simulation results show that SDL achieves substantial power saving over state-of-the-art DLPL schemes.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.155-164
• /
• 2000

Recently Fiber-optic Micro-cellular Wireless Network is considered to solve frequent handoffs and local traffic unbalance in microcellular systems. In this system, central station which is connected to several microcells by optical fiber manages the channels. We propose an efficient sectorization algorithm which dynamically clusters the microcells to minimize the blocked and handoff calls and to balance the traffic loads in each cell. The problem is formulated as an integer linear programming. The objective is to minimize the blocked and handoff calls. To solve this real time sectorization problem the Tabu Search is considered. In the tabu search intensification by Swap and Delete-then-Add (DTA) moves is implemented by short-term memory embodied by two tabu lists. Diversification is considered to investigate proper microcells to change their sectors. Computational results show that the proposed algorithm is highly effective. The solution is almost near the optimal solution and the computation time of the search is considerably reduced compared to the optimal procedure.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.185-191
• /
• 1997

The study presents the linear dynamic analysis of bridges under vehicular movement to examine the performance characteristics due to the various structural and loading conditions. The road surface roughness and bridge-vehicle interactions are considered. The road surface profiles for the approaching roadway and bridge decks are generated from power spectral density functions for different road roughness conditions. A new filtering method using the wheel trace is proposed to obtain the more rational bridge-vehicle interactions from the randomly generated road surface. The dynamic responses of various bridges designed according to current design practice are examined, in which important structural parameters(such as span length, girder spacing, etc.) are considering systematically. In addition, the traffic conditions of multi-truck traveling either consecutively on the same lane or side-by-side on the adjacent lanes are also evaluated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.148-149
• /
• 2014

This paper evaluates performance of a pipelined dynamic bandwidth allocation scheme for XG-PON (10-Gbps-capable passive optical network) system for power saving. Under self-similar traffic and balanced input loads, we evaluate performance of XG-PON systems using computer simulations.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.159-169
• /
• 1997

Recently, due to the increasing overloaded heavy vehicles and traffic volumes fatigue failures of steel highway bridges frequently occur. Therefore, it is important to decide rational fatigue design procedure which can reflect lifetime cumulative fatigue damage reasonably. In this study, cumulative fatigue damages are simulated for various bridge systems and traffic conditions. The AASHTO LRFD fatigue design procedure is reviewed and the current fatigue design loading format, in which a single representative truck is loaded regardless of bridge width, is found to yield inconsistent safety level. Improved loading format with rational design load level for fatigue design is suggested.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.47-54
• /
• 2012

This study analyzed influence factors and the correlation among pollutants which affect occurrence of leaked pollution based on the long-term runoff flow and water quality investigation results to understand the characteristics of highway rainfall runoff pollution load. According to the result of correlation analysis on TSS (Total Suspended Solid) concentration, anteceded dry days, rainfall intensity, traffic volume and etc. as major influence factors of highway rainfall runoff pollution loads, the correlations were weak or scarce in most items. These results might be attributed that runoff pollutant concentration changes vary severely on changes of rainfall intensity and rainfall duration within rainfall and it is affected by disturbances of vehicles and street cleaning and etc. as characteristics of the highway. While Cu, Fe and Zn which are discharged with high concentrations out of heavy metals showed high correlation with particulate matter, organic matter(COD), nutrient(TN, TP), Ni and Pb showed relatively low correlation in a correlation evaluation by pollutant. Significant correlation with traffic volumes was not shown and TSS concentration even decreased in accordance with increase of the traffic volume. In the comparison with precedent studies, it was considered necessary additional analysis of the effects of rainfall section analysis, road type, disturbances of surface contaminants by vehicles, rainfall and climate conditions, surrounding terrains etc.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.113-119
• /
• 2009

In this paper, we proposed an efficient TDMA scheduling algorithm for a clustered Wireless Sensor Network. Since some previous algorithms used unnecessary idle period and schedule period in each frame. It became an overhead that might consume unexpected energy and delay data transmission. To solve this problem, a dynamic scheduling algorithm according to the number of member nodes and node traffic load within a cluster was suggested. Our proposed DS-MAC(Dynamic Scheduling MAC) could save energy and reduce transmission delay Then DS-MAC was analyzed mathematically to compare with the previous algorithms.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.164-166
• /
• 2008

This paper proposes a priority-based duplicate burst transmission mechanism in an optical burst switching network to enhance the probability of successful reception of bursts. The performance of the proposed mechanism is evaluated by NS2 simulations. Our results show that the burst loss rate is improved especially under light traffic loads.