• Journal of the Korea Furniture Society
• /
• v.14 no.1
• /
• pp.11-20
• /
• 2003

Wood cell-wall modification with acetic anhydride, lumen filled with styren monomer and methyl methacrylate, and a combination of these two treatments were studied for their effectiveness for dimensional stability. Compared to those of untreated Pinus densiflora Sieb. et Zucc and sole acetylated red pine, The combination of acetylation and impregnation with methy methacrylate greatly reduced water absorption, increased ASE to the best and gave better bending strength and compression strength.

• Journal of the Korea Furniture Society
• /
• v.29 no.1
• /
• pp.40-48
• /
• 2018

This study analyzes the contribution of hanok that construction in reducing greenhouse gas (GHG) emissions in Korea by calculating the carbon storage of hanoks and comparing it to different housing types in Korea. The hanok is a traditional Korean house. And it were first designed and built in the $14^{th}$ century during thd Joseon Dynasty. According to our results, the number of hanoks in 2016 was approximately 547,085 which was accounting for 7.8% of the total construction market, This study found Gyeongbuk with 95,083, Jeonnam with 88,981, Gyeongnam with 76,388 and Seoul with 43,519 hanoks. According to the GHG Inventory Report for 2016, Korea's total annual GHG emissions amounted to 650 million $tCO_2$, with the carbon stocks in hanoks amounting to 19.2 million $tCO_2$. This accounts for 2.8% of Korea's total GHG emissions and 46.1% of the carbon absorbed by forests. Our results show that hanoks store four times more carbon than light-frame-wood-houses, and 15 times more carbon than concrete-reinforced and steel-frame houses. The main factors causing the hanok industry slowdown are the high construction costs, lack of government support, and insufficient knowledge of hanok architecture. Therefore, to further increase the carbon stock of hanok, more research is needed to improve the technical use of wood and reduce construction of the hanok and prepare legal and institutional arrangements related to hanok industry.

• Journal of the Korea Furniture Society
• /
• v.14 no.1
• /
• pp.59-69
• /
• 2003

When harmonized with modem design, the Korean traditional lacquered woodenware with a history of about two thousand years has the potential to appeal to the global sense of industrial craftsmanship as it is superior to any in terms of material used and is very friendly environmentally. To maximize this potential, however, it is necessary to develop a firm infrastructure for the supply of lacquer, including the forestation for the lacquer wood, the production of lacquer, the improvement of refining skills, and the development of better paints. Also ways must be found to induce the craftsmanship at the turning lathe to be elevated to a major independent industrial craft. Only then the mass-produced lacquered woodenware for everyday use and as tourist goods, showing the best merits of the Korean lathing technique, will be displayed and accepted with a new appreciation.

• Journal of the Korea Furniture Society
• /
• v.23 no.1
• /
• pp.84-94
• /
• 2012

We present the species and the dendrochronological dates of Korean traditional furniture in Forest Museum Collection of Korea National Arboretum. Seven of thirteen were successfully dated. Chest with a flap door (84-55-1) was dated A. D. 1623. Others dated were cabinet (83-41-1: A. D. 1759), Chest with a turnover door (83-39-1; A. D. 1801), Cabinet with two horizontal section (88-39; A. D. 1843), Rice chest (82-27-3; A. D. 1849), Cabinet with two horizontal section (83-40-2; A. D. 1877), Chest with a flap door (84-50; A. D. 1918). Most of existing cabinets were made in 1800s. The 84-55-1 chest was one of the earliest pieces of furniture in the collections of Korea museums. The furniture is usually composed one species. The major species was Pinus densiflora. Bedside cabinet (83-41-1) and Cabinet with two horizontal section (88-39) were made from Korean pine (Pinus koraiensis). Becasue they were dated by the tree-ring chronology of Mt. Bekdu, the timber of their boards could be from the area of Mt. Bekdu.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.9-16
• /
• 2005

This study was carried out to displace traditional virgin wood fiber by exploded MDF-waste fiber for the manufacture of medium density fiberboard. MDF waste was exploded in condition of $215^{\circ}C,20$ minutes. The higher the mixing ratio of exploded MDF-waste fiber, the lower the MOR and IB of MDF. There was no difference of formaldehyde emission by desiccator method between virgin wood fiber and exploded MDF-waste fiber. Adding $25^{\circ}C$ of exploded MDF-waste fiber met the KS of MDF 15 type.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.63-71
• /
• 2006

This study was carried out to resplace traditional virgin wood fiber by recycled MDF-waste fiber for the manufacture of high density fiberboard. For the recycling, MDF waste was disintegrated for 10 minutes and beaten for 15 minutes. There was no difference in formaldehyde emission by desiccator method between virgin wood fiber and disintergrated and beaten MDF-waste fiber. Fiberboard which was maded from 100% of disintergrated and beaten MDF-waste fiber showed similar physical and mechanical properties to those of virgin fiber. The yield of recycled fiber from MDF waste was 85%.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.375-391
• /
• 2022

Improving public awareness of wood is crucial for expanding the use of wood and establishing a wood culture. In this study, the environment and trends of the public's wood utilization were analyzed using a questionnaire survey and online text mining at a time when eco-friendly practices are gaining popularity. As a result of reducing climatic and environmental concerns and its positive physical and psychological effects, the use of wood is predicted to rise in areas intimately connected to everyday living, such as wood furniture, wooden structures, and interior materials. Nonetheless, there was a negative awareness that wood was expensive, difficult to maintain, and associated with deforestation. The correlations between wood-related search terms on major Korean portal sites were analyzed and categorized into five groups: Wooden architecture, cultural education, woodworking, wood industry, and wood policy. As a building material, wood was seen as more traditional and friendly than reinforced concrete and stone. Eighty-six percent of respondents expected to utilize wood as a building material in the future, regardless of whether the wood is domestically produced or imported. Sixty-five percent responded favorably about the effects of wood on the health of wooden home inhabitants. It is believed that both active publicity and quantifiable value analysis of human and environmental friendliness are required to increase pro-environment awareness of wood utilization.

• Korean Institute of Interior Design Journal
• /
• v.13 no.5
• /
• pp.162-172
• /
• 2004

Architects and designers of the 20th Century made various efforts to establish new design languages reflecting the changes of society, the times, and environment. They used furniture, especially chairs, as controversial items of aesthetic value, society and ideology. Le Corbusier and Alvar Aalto are furniture designers as well as architects, who adopted this ‘spirit of the times’ actively and have greatly contributed to modernism. This study will help us to understand the diversity of design since modernism, by comparing these two designers' furniture design. It also covers the common factors In modern furniture design, and analyses their individuality and likeness In design. The following is a comparison of furniture design by Le Corbusier and Alvar Aalto. Le Courbusier linked International design and Aalto linked Rational design and Organic concept design to their furniture, just as they did in their architecture. They were able to establish the base of modern furniture design by adapting new concepts and pursuing humanism. In structure, Le Corbusier's furniture Is simple and proportional. It demonstrates a sophisticated geometric composition, mechanical beauty. On the other hand, Aalto rationally linked nature with human requirements and his furniture is organic and in harmony with geometric structure. In function, Le Corbusier's furniture is standardized and prefabricated. He designed for the user so they could choose to use the furniture efficiently to suit their needs. In comparison with Le Corbusier, Aalto Invented the ‘Stacking Chair’ which allows a more effective use of space and reflected the structure of the human body to improve the user's comfort. In materials and techniques, Le Corbusier used new materials like metal or leather, and attempted new ways such as welding, prefabrication, and standardization for production. On the contrary, Alto mainly used birch, which is the traditional material in Finland, and tried new bent wood techniques and joining methods.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.26-39
• /
• 2010

This is a leading study to replace the structural analysis methodology on the specific traditional joint by a numerical analysis. Tests were carried out to test the compressive methodologies with the numerical results. The Japanese larch was used as a sample. The Orthotropic property of wood was specifically considered for the finite element numerical analysis. Linear numerical analysis and non-linear numerical analysis for the BEAM element and the two SOLID elements of ANSYS were used to analyze the compressive performance. In addition, more finely divided elements were used to raise the accuracy of the numerical result. Finally, the statistically significant differences were tested between that of the analytical and numerical results. It could be concluded that the SOLID 64 element shows the most optimum result when the non-linear analysis with the more finely divided element was used. However, finely dividing of the element is a considerable time consuming process, and it is quite difficult to raise the accuracy of the non-linear numerical analysis. Therefore, if considering the vertical displacement to be of the only interest, the BEAM element is more efficient than the SOLID element because the BEAM element is reflected as a simple line, which is less time consuming and difficult in dividing the elements. But, the BEAM element cannot accurately model the knot as a strength defect factor which is an important property in the orthotropic property of wood. Therefore, the SOLID element should be used to model the strength defect factor, knot, as it can be efficiently applied on the structural size flexure member which could be more strongly effected by the knot. In addition, it is useful at times when the failure types of members are to be more closely investigated, as the SOLID element is able to examine the local stress distribution of the member. The conclusion drawn by this study is of the good concordance between analytical results and numerical results of compressive wood members, but how orthotropic properties should only be considered. The numerical analysis on the specific Korean traditional joints will be based on the current study results.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.