• 방사성폐기물학회지
• /
• 제14권1호
• /
• pp.57-61
• /
• 2016

The Tomographic Gamma Scan (TGS) technique partitions radioactive waste drums into $10{\times}10{\times}16$ voxels and assays both the density and concentration of radioactivity for each voxel thus providing for improved accuracy, when compared to the traditional Non-Destructive Assay(NDA) techniques. It could decrease the degree of precision measurement since there is a trade-off between spatial resolution and precision. This latter drawback is compensated by expanding the Region of Interest (ROI) that differentiates the full energy peaks, which, in turn, results in an optimized degree of precision. The enlarged ROI, however, increases the probability of interference among those nuclides that emit energies in the adjacent spectrum. This study has identified the cause of such interference for the reference nuclide of the TGS technique, $^{137}Cs$ (661.66 keV, half-life 30.5 years), to be $^{110m}Ag$ (657.75 keV, half-life 249.76 days). A new calibration method of determining the optimized ROI was developed, and its effectiveness in accurately characterizing $^{137}Cs$ and eliminating the interference was further ascertained.

• 한국과학교육학회지
• /
• 제17권4호
• /
• pp.481-492
• /
• 1997

The purpose of this study is to construct validity of Tripartite model of "Attitudes towards Science" using Exploratory and Confirmatory Factor Analyses. Exploratory and confirmatory factor analyses are two major approaches to factor analysis. The primary goal of factor analysis is to explain the covariances or correlations between many observed variables by means of relatively few underlying latent variables. In exploratory factor analysis, the number of latent variables is not determined before the analysis, all latent variables typically influence all observed variables, the measurement errors(${\delta}$) are not allowed to correlate, and unidentification of parameters is common. Confirmatory factor analysis requires a detailed and identified initial model. Confirmatory factor analysis techniques allow relations between latent and observed variables that are not possible with traditional, exploratory factor analysis techniques. As a result of exploratory factor analysis, tripartite model of "Attitudes towards Science" being composed of affection, behavioral intention and cognition is empirically identified. But attitude of science career being composed of affection and behavioral intention is identified. In validity test using confirmatory factor analysis, measurement structure of Tripartite model of "Attitudes towards Science" is not correspondent to data set. Because it is concluded that the object of attitudes are not specific.

• 복식문화연구
• /
• 제27권6호
• /
• pp.654-665
• /
• 2019

The process of clothing production creates waste and scrap, which creates environmental, economic, and ethical issues. With this in mind the concept of ethical and sustainable fashion is discussed on many platforms as an important and timely topic. Many solutions have been presented on this subject. For the solution of this problem which has been increasing in the fashion and textile industry, the usage of sustainable materials and production methods is needed. There in a 'recyclable material cycle' should be adapted, instead of a 'traditional material cycle'. New methods and techniques should be developed with multi-disciplinary design approaches to produce creative and high value-added products in the name of fashion and sustainability. This is seen as one of the more effective solutions. This study aims to show that production scraps can be transformed into timely clothing designs with samples. The fabric scraps from different brands were turned into unique clothing designs with up to date trends by designer. In the practices completed while following the design process, collage and patchwork techniques were applied depending on the characteristics of the scrap fabric, artistic figures were hand-stitched onto the design. With this study, the scraps that get thrown into dumping grounds and damage the ecosystem can turn into ethical and economic benefits for the manufacturer. How to choose new high value-added products and create an awareness of social responsibility is also shown with examples in this study.

• 대한가정학회지
• /
• 제32권2호
• /
• pp.145-160
• /
• 1994

This paper reviews the feminist approach in family therapy field as a proper intervention for the sexist problems in Korean family. First this paper identifies the sexist problems according to the traditional family ideology structure and value conflicts due to the change of society in Korean family and analyses those problems referred to the actual situation of family counseling and therapy. Second this paper introduces the background for the emergence of the feminist family therapy. The feminist approach in family therapy had been emerged since the woman's psychology and feminist therapy appeared in psychology by the influence of women's movement in late 1960s Third the critiques to the existed family therapy from the viewpoint of feminist family therapy are raised. this approach which is challenging the existed family therapy and criticizing the main theoretical models especially emphasizes gender as a primary factor in the approaches of family problems and includes all the aspects of feminism an awareness of sexism and attempts to counteract the ways in which family therapy may reinforce women's surbodinate position. Fourth the techniques of feminist family therapy and the training methods for feminist family therapists are explained. this approach attempts to develop the clinical skills teaching tools and techniques to incorporate the feminist perspective into family therapy practices and proposes the various education and training methods. Finally this paper reviews interests in the feminist family therapy in Korea an has good prospects of increase of it.

• 대한가정학회지
• /
• 제46권8호
• /
• pp.17-26
• /
• 2008

The purpose of this study was to identify the aesthetic characteristics of modern fashion design use with a particular focus on transparency, and to help create future vision and feature. As part of the methodology for this study, I examined the concept of transparency, its characteristics and how it was expressed through art, architecture and other designs using literature research. Furthermore, I performed justifiable analysis on modern fashion design which used transparency from the 1990s till present. The following concepts were deciphered from information: Firstly, the concept of purity was highlighted. The emphasis here was to enhance the body's natural beauty with simple silhouettes that do not restrict its curves, using light materials such as clear vinyl, semi-clear materials or thin chiffon. Secondly, to express sensuality by exposing the body's curves with tight wrapping using clear materials, or with indirect and symbolic see-through techniques using contrasting clear, semi-clear and opaque materials. Thirdly, to express futurism through cyber and electronic images using high tech or shiny materials such as metal or holograms. Mechanical movements or effects of light are also used. Fourthly, to express playful characteristic by promoting surprises and disharmony that contradict with traditional techniques. This is carried out by intentionally exaggerating certain portions of clothes through disorder elements or confusion, and unsymmetrical shapes which destruct the human body's normal form.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.295-303
• /
• 2013

This paper reports an investigation of pulse width modulation (PWM) techniques for two-phase brushless DC (BLDC) motors fed by a two-phase eight-switch inverter in a fan application. The three-phase BLDC motor is widely applied in industry; however, a lower-cost two-phase BLDC motor and drive circuit has been greatly in demand in recent years. In this paper, we introduce a mathematical model of the two-phase BLDC motor with sinusoidal back electromotive forces (EMFs) based on traditional three-phase BLDC motors. To simplify the drive algorithm and speed up its application, we analyze the principle of block commutation for a two-phase BLDC motor drive in the 180-electrical-degree conduction mode, and we further propose five PWM schemes to improve the commutation performance of the two-phase BLDC drive. The effectiveness of the proposed PWM methods is verified through experiments.

• 디지털콘텐츠학회 논문지
• /
• 제14권2호
• /
• pp.143-149
• /
• 2013

최근에는 사용자들이 좀 더 정교하고 복잡한 게임 인공지능을 기대하기 때문에, 많은 연구자나 개발자들은 인공지능 LOD 기법에 더 많은 관심을 갖게 되었다. 하지만, 전통적인 기하 LOD와는 달리, 기존의 인공지능 LOD 기법은 제한된 범위밖에 활용되지 못한다. 이에 본 논문에서는 게임 객체를 제어하기 위한 수단으로 계층적 상태 기계와 Lua 스크립트 언어를 사용하는 인공지능 LOD 기법을 제안하고 있다. 제안된 접근 방식을 이용하면, LOD를 위한 다단계의 인공지능 모델을 쉽게 도출할 수 있으며 상태기계를 직접 하드 코딩하지 않고 다양한 객체를 설계할 수 있다. 더불어, 제안된 기법의 효용성을 보여주기 위해, 프로토타입 엔진을 이용하여 수행한 성능 시험 결과도 보여 주고 있다.

• ETRI Journal
• /
• 제39권5호
• /
• pp.621-631
• /
• 2017

Abnormal samples are usually difficult to obtain in production systems, resulting in imbalanced training sample sets. Namely, the number of positive samples is far less than the number of negative samples. Traditional Support Vector Machine (SVM)-based anomaly detection algorithms perform poorly for highly imbalanced datasets: the learned classification hyperplane skews toward the positive samples, resulting in a high false-negative rate. This article proposes a new imbalanced SVM (termed ImSVM)-based anomaly detection algorithm, which assigns a different weight for each positive support vector in the decision function. ImSVM adjusts the learned classification hyperplane to make the decision function achieve a maximum GMean measure value on the dataset. The above problem is converted into an unconstrained optimization problem to search the optimal weight vector. Experiments are carried out on both Cloud datasets and Knowledge Discovery and Data Mining datasets to evaluate ImSVM. Highly imbalanced training sample sets are constructed. The experimental results show that ImSVM outperforms over-sampling techniques and several existing imbalanced SVM-based techniques.

• Wind and Structures
• /
• 제21권5호
• /
• pp.489-503
• /
• 2015

This paper surveys and complements contributions by the National Institute of Standards and Technology to techniques ensuring that the wind tunnel procedure for the design of high-rise structures is based on sound methods and allows unambiguous inter-laboratory comparisons. Developments that enabled substantial advances in these techniques include: Instrumentation for simultaneously measuring pressures at multiple taps; time-domain analysis methods for estimating directional dynamic effects; creation of large simulated extreme directional wind speed data sets; non-parametric methods for estimating mean recurrence intervals (MRIs) of Demand-to-Capacity Indexes (DCIs); and member sizing based on peak DCIs with specified MRIs. To implement these advances changes are needed in the traditional division of tasks between wind and structural engineers. Wind engineers should provide large sets of directional wind speeds, pressure coefficient time series, and estimates of uncertainties in wind speeds and pressure coefficients. Structural engineers should perform the dynamic analyses, estimates of MRIs of wind effects, sensitivity studies, and iterative sizing of structural members. The procedure is transparent, eliminates guesswork inherent in frequency domain methods and due to the lack of pressure measurements, and enables structural engineers to be in full control of the structural design for wind.

• 복식문화연구
• /
• 제19권4호
• /
• pp.851-862
• /
• 2011

The purposes of this study were to identify the material manipulation techniques for paper garments and their characteristics. Reference books or articles were reviewed and catalogues from paper garments exhibition or show, brochures from Paper Museums, and internet sites of paper fashion designers were selected for analysis. Paper has much similarity with natural cellulose textiles in appearances and contents but has much distinct differences in their physical characteristics such as strength, durability, washability, and resilience, and could be treated as one category of textiles. Paper garments were developed with practicality and functionality for the poor and Buddist monks at first but progressed into more aesthetics later for the rich. Paper garments could be divided into 4 categories of garments made of paper, paper thread fabric or knit, modified paper with wanter, and beaten bark of mulburry bush. Paper can be manipulated by coloring & cutting, bonding, or quilting and bonding or quilting can reenforce the strength of paper but cannot increase flexibility. Paper manipulated by weaving or knitting has very similar physical properties as cotton or linen and ideal for summer textiles. Paper can be manipulated with water to make a paper paste and bodice can be moulded with paper paste or Joomchied. Also we can express beautiful patterns on the surface of paper by washouting. Konnyaku paste or lacquer can be used to make paper garments to be waterproof.