• Journal of the East Asian Society of Dietary Life
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1993

The results obtained form this study are as follows(For examples : ) 1. The tea wares for hwarang were entirely different from those appearing in Lu yu's ch'a ching as they were creatively developed by hwarang to suit outdoor sue in their outdoor activities as a disciplinary training. 2. In analysis of Korea's traditional ceramics starting for koryo down to choson in its pattern, most Korean ceramics corresponded with the golden rule completely and the rest were quite close to it.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.27-32
• /
• 2020

The main cystal phases of traditional ceramics made of clay, quartz, and feldspar are mullite and cristobalite. Although mullite can provide strength to the ceramic body, it cannot be used for the heat resistant ceramics because the thermal expansion coefficient of it is relatively high as 5.3 × 10^-6/℃. In this study, development of lightweight heat resistant ceramics was tried by producing cordierite phase, of which the thermal expansion coefficient is 2.6 × 10^-6/℃, instead of forming mullite phase in the ceramic body by using Sanchung Kaolin and Jangsu gobdol sludge. It was concluded that ceramics having good heat resistant, bending strength, and refractoriness under load could be fabricated when 80 wt% of Sanchung Kaolin and 20 wt% of Jangsu gobdol sludge were used as raw materials. Also, the bulk specific gravity is 1.78, which is lighter than the existing Buncheong ware.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.334-337
• /
• 2017

In this paper, to develop the ceramics with high $d_{33}$ and high $Q_m$ for ultrasonic transducer applications, $0.10Pb(Ni_{1/3}Nb_{2/3})O_3-0.07Pb(Mn_{1/3}Nb_{2/3})O_3-0.83Pb(Zr_{0.5}Ti_{0.5})_{0.83}O_3$ (PNN-PMN-PZT) ceramics were sintered at $940^{\circ}C$ using $CuO-Li_2CO_3-Bi_2O_3$ (CLBO) as a sintering aid by a traditional solid-state technique. The influence of zinc oxide additive on the physical properties of the prepared ceramics were systematically investigated. The R-T (rhombohedral-tetragonal) phase coexistence was found in the ceramics without zinc oxide additive and with increasing amounts of ZnO additive, the specimens showed a tetragonal phase. The formation of a liquid phase between ZnO and $Bi_2O_3$ contributed significantly to the grain growth of specimens. For the 0.1 wt% ZnO ceramics, the optimal physical properties of $d_{33}=370pC/N$, ${\varepsilon}_r=1,344$, $k_p=0.621$, and $Q_m=1,523$ were obtained.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.61-74
• /
• 2011

The material characteristics of Chos$\breve{o}$n whiteware were investigated by analyzing and comparing the body and glaze compositions of whiteware shards excavated at the Kwangju royal kilns, Ch'unghyodong, and four other local-level kilns. In Korea, the rise of whiteware technology began in the early years of the Chos$\breve{o}$n dynasty, when the indigenous tradition of Kory$\breve{o}$ celadon was strongly influenced by the whiteware aesthetics of the Chinese Ming dynasty. The Kwangju royal kilns eventually made hard-textured whiteware of a quality equivalent to that of the Chinese by using type of porcelain stone that contained slightly less $Fe_2O_3$ and $TiO_2$ and slightly more $K_2O$ than that used for celadon. In contrast, the potters of Ch'unghyodong achieved the same level of quality by finding and using a totally different material: kaolinitic clay. The porcelain stone used at the Kwangju kiln was commonly found in Korea and south China, whereas kaolinitic clay (which has a high aluminum content) was typically found in north China, and was only rarely used in Korea. The flux component of the glaze compositions was mostly limestone, first in burnt form and later in crushed form, and the clay component was often glaze stone, which was a finer-grained porcelain stone with a higher proportion of feldspar. In the future, this comparative analytical study of Korean whiteware components should be extended to the $18^{th}$- and $19^{th}$-century kilns that are currently being excavated at a rapid pace.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.90-97
• /
• 2002

Ceramics are being increasingly used in industry due to their outstanding physical and chemical properties. But these materials are difficult to machine by traditional machining processes, because they are hard and brittle. Recently, as one of various alternative processes, laser-beam machining is widely used in the cutting of ceramics. Although the use of lasers presents a number of advantages over other methods, one of the problems associated with this process is the uncertain formation of cracks that result from the thermal stresses. This paper presents a Bayesian probabilistic modeling of crack formation over thin alumina plates during laser cutting.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.11a
• /
• pp.523-529
• /
• 2006

Nowadays, a logistics and distribution center plays an important role in all industries. In addition to its traditional functions as a storage and unloading facility the distribution center serves as an assembly place for information, a source of information, and a turning point for the flow of information. On account of the above-mentioned reasons, each and every industry has increasing need of logistics distribution center. At this juncture, the present author thinks that it is necessary to make a study of the establishment and maximization of a ceramics logistics distribution center as a way for activating the ceramics industry.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.597-612
• /
• 2009

This paper is an anthropological study on the regional revitalization movement by the traditional ceramic industry in Mashiko-cho, Japan. It especially deals with the issues like history of revitalization based on ceramics, idealogical features and roles of core activist group, and adaptive strategies of local society to the ever-changing circumstances. The ceramic industry of Mashiko-cho had developed vigorously in 19C, and had passed many critical points in 20C. In 1960s, the ceramic industry of Mashiko-cho developed stably through introducing of Mingei(民藝) ideology and artists. This is evaluated as a 'bottom-up' regional revitalization movement and a active utilization of traditional cultural resources. In Mashiko-cho, the ideological leadership of cultural artist groups have been central roles in the regional revitalization movement. The representative cases are transformation of production of ordinary ceramics to production of Mingei ceramics from the middle of 1950s, official organization of core activist group and establishment of direct sale system by the producers in the middle of 1960s, and full-scale cooperation of private sector and public sector from the beginning of 1980s. Nonetheless the regional revitalization movement by the traditional ceramic industry in Mashikocho have come out well up to now, it should make new tradition which is well-matched to the ever-changing circumstances as seeing various and complex differentiation on the inside of local society.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.184-184
• /
• 2009

Lead-free Piezoelectric $[Li_{0.04}(Na_{0.44}K_{0.56})](Nb_{0.88}Ta_{0.1}Sb_{0.02})$ (abbreviated as NKNLTS) has been synthsized by conventional mixed oxide method traditional ceramics process without cold-isostatic pressing. Effect of $Bi_2O_3$ addition on NKNLTS ceramics was investigated. Piezoelectric properties of the ceramic were varied with the amount of $Bi_2O_3$ addition and showed the maximum Kp value at 0.4wt% $Bi_2O_3$ addition. The results show that the optimum poling condition for NKNLTS ceramics of 3.5kV/mm, poling temperature of $120^{\circ}C$ and poling time of 30min. At the sintering temperature of $1100^{\circ}C$ and the calcination temperature $800^{\circ}C$, the optimal values of density=$4.7g/cm^2$, Kp=0.44, $\varepsilon_r$=1309 were obtained. Consequently, lead free piezoelectric ceramics with the excellent piezoelectric could be fabricated using a conventional mixed oxide process and the optimal manuacturing condition of those was obtained.

• 한국문화재보존과학회:학술대회논문집
• /
• 2003.03a
• /
• pp.46-46
• /
• 2003

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.433-441
• /
• 2023

Piezoelectric ceramics play an important role in electrical and electronic devices such as sensors, actuators, and microelectronic devices. However, traditional ceramics are difficult to be used in various process industries due to their high brittleness and low flexibility. Therefore, piezoelectric paint sensors have been designed for application to the curved surfaces of complicated structures. Furthermore, recently, significant attention has been focused on the development of paint sensors that can be used as structure health monitoring sensors for vibration, impact, and acoustic emission. Several studies have successfully demonstrated the possibility that smart paint sensors can take the place of traditional ceramic sensors. In this review, we briefly introduce the concept of the piezoelectric paint sensors and the expected application field as well as their preparation and history.