• The Journal of Korean Physical Therapy
• /
• 제31권5호
• /
• pp.317-321
• /
• 2019

Purpose: To identify the effect of knee joint traction therapy on pain, physical function, and depression in patients with degenerative arthritis. Methods: In total, 30 patients with degenerative arthritis were randomly assigned to one of two groups: the experimental group, who underwent knee joint traction therapy, and the control group, who underwent general physical therapy (15 patients per group). Pain was measured using the visual analogue scale (VAS), physical function was measured using the Western ontario and McMaster universities osteoarthritis (WOMAC) index, and depression was measured using the Beck depression inventory (BDI). The VAS, WOMAC score, and BDI score were recorded before and after the 4-week treatment. Results: As a result of comparison within groups, the experimental and control group showed significant difference for VAS, WOMAC and BDI after the experiment (p<0.05). In comparison between the two groups, the experimental group in which knee joint traction was applied showed more significant change in VAS, WOMAC and BDI than the control group (p<0.05). Conclusion: This study showed that knee joint traction therapy was effective in improving pain, physical function, and depression in patients with degenerative arthritis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.950-954
• /
• 1998

This paper describes a development of traction unit for 2-motor driven electric vehicle (EV). The traction unit is consisted with an interior permanent magnet synchronous motor (IPMSM), a reduction gear and an inverter for electric vehicle that is driven by 2 motors without differential gear. For traction unit, prototype IPMSM and inverter have been developed. The IPMSM was designed by CAD program that was developed with both equivalent circuit method and FEM. Also the inverter was developed to drive 2 motors with 6 legs IGBT switches in a control board. The vector control algorithm was implemented with maximum torque control method in the constant torque region and field weakening control method in the constant power region considering inverter capacity. To verify that the traction unit is more high efficiency and has more high power density than a traction unit with induction motor with the same power, we would like to show the results about the design and analysis of the IPMSM and the experiment results about the traction unit.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1738-1743
• /
• 2004

This paper presents an automobile traction control system by using a sliding mode controller with disturbance observer for estimating the car-body speed. First, we show that the control system, which combines an automobile system and a disturbance observer, can be divided into a controllable system and an estimated one. And, we found out that the effect of the traction control and ABS depends on the air resistance of the car. Then, the sliding mode control system is designed using the obtained combined system. And finally, the stability of this control system is verified by simulation and it shows a very satisfactory results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.440-445
• /
• 2002

In this paper, traction system for urban transit maglev system is proposed. Using vector control strategy to control magnitude and frequency of output voltage transiently is general. But in case of traction system for railway vehicle, it is impossible that adapt vector control because there is one-pulse mode in a high speed region. So this paper proposes the control strategy using vector control in a low speed region and slip frequency control in a high speed region. And also proposes overmodulation method that makes to change in one-pulse mode softly. The performance of traction system will be verified by simulation results using ACSL.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.165-170
• /
• 2015

In this paper, The strength and driving characteristics of it were investigated according to developing the traction motor for 8200 electric locomotive series. For this purpose, Flux density strength was analyzed and then structural strength was investigated such as a stator frame, design of the rotor shaft bearing according to the design process. In addition, the traction motor operating point was analyzed according to slip frequency variation at a power source frequency. As the results of analysis on torque-speed characteristic curve, we was confirmed that traction motor was controlled as torque control prior to motor speed 1610[rpm], power control between 1610[rpm] and 2500[rpm] and breakdown torque control more than motor speed 2500[rpm].

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.314-315
• /
• 2011

This paper introduces the design and control method of braking chopper circuit which can supply input power to ventilation inverter of traction control system. The DC input voltage from auxiliary block (static inverter) is normally used as an input of ventilation inverter. It converts DC input to AC output voltage to drive cooling fans for traction control system and traction motors. The electrical braking force is very important for high speed train to guarantee safety even though the train is running in the dead section where the pantograph voltage is not supplied. When the high speed train decelerate speed in dead section, the regenerative energy is dissipated by braking resistor. This paper proposed the braking chopper control method to implement rheostatic braking function and the appropriate chopper circuit for supplying voltage source to ventilation inverter during rheostatic braking mode. The proposed chopper circuit makes it possible for traction control system to regenerate power continuously regardless of the existence of pantograph voltage. The feasibility of proposed braking chopper control and circuit were proven by inertia load test and actual train field test.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.184-191
• /
• 2009

The common requirements of rough terrain mobile robots are long-term operation and high mobility in rough terrain to perform difficult tasks. In rough terrain, excessive wheel slip could cause an increase in the amount of dissipated energy at the contact point between the wheel and ground or, even more seriously, the robot could lose all mobility and become trapped. This paper proposes a traction control algorithm that can be independently implemented to each wheel without requiring extra sensors and devices compared with standard velocity control methods. The proposed traction algorithm is analogous to the stick-slip friction mechanism. The algorithm estimates the slippage of wheels by angular acceleration change, and controls the increase or decrease state of torque applied to wheels Simulations are performed to validate the algorithm. The proposed traction control algorithm yielded a 65.4% reduction of total slip distance and 70.6% reduction of power consumption compared with the standard velocity control method.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.429-435
• /
• 2015

This study proposes a re-adhesion algorithm that has stable traction effort for rolling stock slip/slide minimization when deliverable traction decreases by slip. The proposed scheme estimates appropriate reference speed using two encoders for reducing slip and controls traction effort stably and has stable control characteristics for disturbance. The algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force stably controls traction effort and gives rolling stock excellent acceleration and deceleration characteristics. And a slip sensing element that can quickly detect slip is used. Load motor and inverter were checked in various slip conditions for creating various line conditions.

• 전기학회논문지P
• /
• 제60권3호
• /
• pp.138-143
• /
• 2011

Electric locomotive is adapted to high speed driving and mass transportation due to obtaining high traction force. The electric locomotive is operated by motor blocks and traction motors. Train speed is controlled by suppling power from motor blocks to traction motors according to reference speed. Speed control of the electric locomotive is efficient by spending energy between motor blocks and traction motors. Currently, switched reluctance motors have been studied because the efficient is higher than induction motors. In this paper, model of the switched reluctance motor is presented and the PID controller is applied to the model for the speed control by using Simulink. Asymmetry converter is used for real-time control and system performance is demonstrated by simulating the speed of switched reluctance motor including PID controller.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.357-367
• /
• 1999

매입형 영구자석 동기전동기와 인버터, 그리고 추진제어기로 구성된 추진시스템을 갖는 독립 구동형 전기자동차에 대하여 파라미터 변동특성을 반영하는 전동기 제어기법과 주행특성을 개선한 새로운 추진제어기 기법을 제시하였다. 기존의 방식과는 다르게 전동기의 등가파라미터인{{{{ { L}_{d } }} 와{{{{ { L}_{q } }} 의 변동을 전류의 크기뿐만 아니라 전류 위상각의 관점에서 고려하였으며, 해석적인 방법으로 전 영역에 대한 변동 곡선을 제시하였다. 그리고{{{{ { L}_{d } }}와 {{{{ { L}_{q } }}에 대한 변동을 신경회로망을 이용하여 추정기를 구성한 후 신경회로망 추정기를 갖는 매입형 영구자석 동기 전동기용 벡터제어 기법을 제시하였다. 또한, 추진제어기는 토크분배 기능과 토크약화제어 기능을 구비하도록 만들어졌으며, 선회 조종성과 슬립율이 안정 영역 내에서 운전 되도록 개선된 추진 제어기를 제시하였다. 제안된 제어기의 동특성을 실험과 모의 실험을 통하여 검증하였다.