• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.988-993
• /
• 2009

In this paper, we deal with a tracking gain-up controller design problem to control effectively the shake of tracking actuator after a track seek. A minimum tracking gain-up open-loop gain can be calculated by estimating the shake of tracking actuator and a desired transient specification is considered to diminish effectively the shake of actuator. A tracking gain-up controller is designed by considering a robust $H_{\infty}$ control problem with a regional stability constraint. The proposed tracking gain-up controller design method is applied to the track-following system of a DVD recording device and is evaluated through the experimental results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.4
• /
• pp.356-364
• /
• 2013

This paper presents a tracking gain-up controller design method to control effectively the vibration of tracking actuator caused by external shocks and remaining velocity after seek control. A pole placement constraint is considered to assure a desired transient response against the vibration of tracking actuator. A loop gain-up constraint is introduced to hold the tracking gain-up loop gain and control bandwidth within allowable bounds. The pole placement constraint is expressed by a matrix inequality and the loop gain-up constraint is considered as an objective function so that genetic algorithm can be applied. Finally, a tracking gain-up controller is obtained by integrating a genetic algorithm with LMI design approach. The proposed tracking gain-up controller design method is applied to the track-following system of a DVD recording device and its effectiveness is evaluated through the experimental results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.279-286
• /
• 2010

In this paper, we provide a robust track-following controller design method for the stable coarse seek control. Due to the inaccurate velocity control during a coarse seek, the shake of fine actuator is generated and thus a gain-up track-following control is required to complete stably the coarse seek. To this end, a loop gain adjustment algorithm is introduced to estimate accurately the shake of fine actuator. A weighting function can be properly selected from a minimum tracking gain-up open-loop gain, calculated from the estimated shake quantity of fine actuator. A robust tracking gain-up controller is designed by considering a robust $H_{\infty}$ control problem using the weighting function. The proposed design method is applied to the coarse seek control system of an optical rewritable drive and is evaluated through the experimental results.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.351-359
• /
• 2007

In this study, a hierarchical switching control scheme based on robust control theory is proposed for tracking control of vehicle longitudinal acceleration in the presence of large uncertainties. A model set consisting of four multiplicative-uncertainty models is set up, and its corresponding controller set is designed by the LMI approach, which can ensures the robust performance of the closed loop system under arbitray switching. Based on the model set and the controller set, a switching index function by estimating the system gain of the uncertainties between the plant and the nominal model is designed to determine when and which controller should be switched into the closed loop. After theoretical analyses, experiments have also been carried out to validate the proposed control algorithm. The results show that the control system has good performance of robust stability and tracking ability in the presence of large uncertainties. The response time is smaller than 1.5s and the max tracking error is about $0.05\;m/S^2$ with the step input.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1241-1248
• /
• 2004

A controller of wheeled mobile robot(WMR) based on Lyapunov theory is designed and a Fuzzy-Neural Network algorithm is applied to this system to adjust controller gain. In conventional controller of WMR that adopts fixed controller gain, controller can not pursuit trajectory perfectly when initial condition of system is changed. Moreover, acquisition of optimal value of controller gain due to variation of initial condition is not easy because it can be get through lots of try and error process. To solve such problem, a Fuzzy-Neural Network algorithm is proposed. The Fuzzy logic adjusts gains to act up to position error and position error rate. And, the Neural Network algorithm optimizes gains according to initial position and initial direction. Computer simulation shows that the proposed Fuzzy-Neural Network controller is effective.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.4
• /
• pp.137-143
• /
• 2021

We propose an adaptive non-singular terminal sliding-mode control for the fast finite-time convergence (FANTSMC) in robot manipulator. The proposed FANTSMC approach is developed to be applied without singularity in robot manipulator, which has a new pole-placement control with the non-singular terminal sliding variable while generating the desirable control torque. Moreover, the switching gain is designed to suppress the time-delayed estimation error appropriately, which aims at providing the high robust tracking performance. Also, the proposed one employs one-sample delayed information to cancel out the system uncertainties and disturbances. For these reasons, it offers strong attraction within the finite time. It is shown that the tracking performance of the proposed FANTSMC approach is guaranteed to be uniformly ultimately bounded through the Lyapunov stability. The effectiveness of the proposed FANTSMC approach is illustrated in simulations, which is compared with that of the up-to-date control approach.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.462-466
• /
• 2008

This paper proposes a stable gain scheduling method of linear time invariant controllers for tracking servo system. In order to read and write the data on the optical disc, the pick-up head should be moved to the exact track quickly and follow the track immediately. Two different controllers are used for each moving and track-following. In pull-in period, a transition period from moving to track-following, the head might slip and miss the target track. This brings on another searching process and increases the total time. One way to avoid slipping is to extend the bandwidth of the track-following controller. But, extending the bandwidth could degrade the following performance. More prevalent way is to use one more controller in this pull-in period and switch to the following controller. In general, however, switching or scheduling of stable controllers cannot guarantee the stability. This paper suggests an scheduling method guaranteeing the overall stability not only in a generalized form but also in special form for SISO system. The sufficient condition is derived from the fact that Q factor of a stable controller should be stay in $RH_{\infty}$ space. In the experiment, the proposed method shows better performance than the switching method such as shorter time and lower current consumption.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.239-248
• /
• 2022

Forestry crane work in a forest harvester or forwarder is regarded as one of most hard work requiring a very high level of operation skill. The operator must handle two or more multi-axes joysticks simultaneously to control the multiple manipulators for maneuvering the crane-tip to its intended location. This study has been carried out to develop a crane-tip controller which can intuitively maneuver the crane-tip, resulting in improving the productivity by decreasing the technical difficulty of control as well as reducing the workload. The crane-tip controller consists of a single 2-axis joystick and a control algorithm run on microcontroller. Lab-scale forestry crane was constructed using electric cylinders. The crane-tip control algorithm has the crane-tip follow the waypoints generated on the given path considering the dead band region using LBO (Lateral Boundary Offset). A speed control gain to change the speed of relevant cylinders relatively is applied as well. By the P (Proportional) control within the control interval of 20 msec, the average error of crane-tip control on the predefined straight path turned out to be 14.5 mm in all directions. When the joystick is used the waypoints are generated in real time by the direction signal from the joystick. In this case, the average error of path control was 12.4 mm for straight up, straight forward and straight down movements successively at a certain constant speed setting. In the slant movement of crane-tip by controlling two axes of joystick simultaneously, the movement of crane-tip was controlled in the average error of 15.9 mm when the crane-tip is moved up and down while moving toward forward direction. It concluded that the crane-tip control was possible using the control algorithm developed in this study.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.2
• /
• pp.1-13
• /
• 2018

This paper deals with the NREL (National Renewable Energy Laboratory) 5-MW reference wind turbine. The controller which include MPPT (Maximum power point tracking) control algorithm and tower load reduction control algorithm was designed by MATLAB Simulink. This paper propose a tower damper algorithm to improve the existing tower damper algorithm. To improve the existing tower damper algorithm, proposed tower damper algorithm were applied the thrust sensitivity scheduling and PI control method. The thrust sensitivity scheduling was calculated by thrust force formula which include thrust coefficient table. Power and Tower root moment DEL (Damage Equivalent Load) was set as a performance index to verify the load reduction algorithm. The simulation were performed 600 seconds under the wind conditions of the NTM (Normal Turbulence Model), TI (Turbulence Intensity)16% and 12~25m/s average wind speed. The effect of the proposed tower damper algorithm is confirmed through PSD (Power Spectral Density). The proposed tower damper algorithm reduces the fore-aft moment DEL of the tower up to 6% than the existing tower damper algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.729-734
• /
• 2010

In the initial stage of the communications between a base station and a satellite transponder, the base station transmits the frequency-sweeping un-modulated up-link carrier within a certain frequency range to acquire the doppler frequency shift and signal power between the base station and the satellite in orbital flight. The satellite transponder acquires and tracks the carrier in order to initialize the communication. To control such initialization process, the satellite receiver should analyze the input carrier signal in various ways. This paper presents an SNR estimation algorithm to control the initialization process. The proposed algorithm converts the input signal into the baseband polar coordinate representation and estimates the SNR via the statistics of the angular signal components as well as the status parameters to control the receiver. The Monte-Carlo simulations shows the validity of the estimation proposed.