• 로봇학회논문지
• /
• 제15권1호
• /
• pp.77-89
• /
• 2020

This paper proposes a simple and intuitive model-free torque-tracking control for rotary electro-hydraulic actuators. The undesirable natural-velocity-feedback effect is discussed by introducing mechanical impedance into the electro-hydraulic actuation system. The proposed model-free torque control comprises inner- and outer-loop control to achieve two control objectives. Inner-loop control reduces the mechanical impedance passively and optimally. To improve the tracking accuracy, a certain form of proportional-integral-derivative control is applied to the outer loop. The robustness of the proposed closed-loop system against external disturbances is demonstrated by transforming the two-loop control structure into a disturbance observer form. The proposed method is validated on a single joint electro-hydraulic actuator.

• 대한임베디드공학회논문지
• /
• 제6권3호
• /
• pp.132-138
• /
• 2011

This paper presents an intelligent control approach for lateral position control of an autonomous four wheel steered snowplowing robotic vehicle. The vehicle is built for removing snow on the highway. Dynamics of the vehicle is derived and linearized for LQR control. Lateral position is controlled by the LQR method first, then the neural network control technique is introduced to improve tracking performances under the presence of load. The feasibility of using four wheel steering control is investigated by simulation studies of lateral position tracking of the Ford F-250 truck model. Performances of a LQR control method and a neural network control method under virtual snowplowing situation are compared.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권1호
• /
• pp.58-65
• /
• 2001

This paper proposes a self tuning fuzzy inference method by the genetic algorithm in the fuzzy-sliding mode control for a robot. Using this method, the number of inference rules and the shape of membership functions are optimized without an expert in robotics. The fuzzy outputs of the consequent part are updated by the gradient descent method. And, it is guaranteed that he selected solution become the global optimal solution by optimizing the Akaikes information criterion expressing the quality of the inference rules. The trajectory tracking simulation and experiment of the polishing robot show that the optimal fuzzy inference rules are automatically selected by the genetic algorithm and the proposed fuzzy-sliding mode controller provides reliable tracking performance during the polishing process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1047-1050
• /
• 1993

Recently, AC servo motor has expanded its application areas the to the development of the power semi-conductor and control technology. But it has large torque ripple for its nonlinear characteristics and phase commutaion. In this paper, we proposed the switching angle overlapping method, and current control using tracking method in order to generate the constant torque of AC servo motor that has the trapezoidal back e.m.f. It is compared the these types of control method with the characteristics through simulation. We show that these methods lead the torque ripple to reduce and makes the position and speed characterlistics improved effectively. Also we prove that current control using tracking method is the best way to reduce torque ripple among the these types of control method.

• 전자공학회논문지SC
• /
• 제44권4호통권316호
• /
• pp.67-73
• /
• 2007

광디스크 드라이브에서 일반적으로 광 픽업은 포커싱과 트래킹 서보 시스템의 결합된 동력한 시스템을 갖는다. 이 결합된 동력학 시스템은 서로의 구동간섭에 의하여 광디스크 드라이브의 성능을 저하시킨다. 특히 디스크의 표면에 결함이 존재할 경우에는 포커싱과 트래킹 서보 시스템의 구동간섭으로 인해 시스템이 안정화하는데 많은 시간이 소요되고 결함구간이 길어질 경우 광학 렌즈가 추종하던 트랙을 이탈할 수 있다. 본 논문에서는 이 문제점을 극복하기 위하여, 트래킹 에러와 포커싱 에러의 관측을 기반으로 광디스크 드라이브의 새로운 제어 방법을 제안한다. 결함이 존재할 경우 결합된 동력학 시스템에 대한 보상을 통하여 시스템의 안정화 시간을 감소시킨다. 동일한 표면 결함에 대하여 제안된 제어 방법의 개선된 성능은 실험을 통하여 검증하였다.

• 한국지능시스템학회논문지
• /
• 제11권4호
• /
• pp.359-365
• /
• 2001

본 논문에서는 바이러스-진화 유전 알고리즘에 기반한 퍼지 기저 함수 확장을 이용한 표적 추적 시스템의 설계 방법을 제안한다. 일반적으로 표적 추적의 목적은 센서로부터 얻어진 표적의 과거 위치에 기반하여, 미래에 대한 표적의 궤적을 추정하는 것이다. 확장 칼만 필터와 같은 전통적이고 수학적인 비선형 필터링 기법에서 강한 비선형성은 시스템의 성능을 저하시킬 수 있다. 이러한 비선형 필터링 기법의 장점을 결합한다. 제안된 방법에서, 확장 칼만 필터의 파라미터로 학습 데이터를 구성하고, 강한 근사화 능력을 가지는 퍼지 기저 함수에 유전 알고리즘의 유전적 다양성 상실로 이한 조기 수렴을 방지하는 바이러스-진화 유전 알고리즘을 결합하여, 파라미터와 규칙 수를 동시에 동정시킴으로써 확장 칼만 필터의 오차를 보정한다. 마지막으로, 제안된 방법은 3차원 상의 모의 실험을 통해 그 성능이 입증된다.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.668-673
• /
• 2010

Given a periodic reference signal or disturbance, repetitive control is a special control scheme to reduce a tracking error effectively by the periodic signal generator in the repetitive controller. In general, a repetitive controller is added on the existing feedback control system to improve the tracking performance. However, because the information used in the design of the feedback controller is not taken into account, the design problem of the repetitive controller is totally another problem irrespective of that of the feedback controller. In this paper, we present a more general method to design an add-on type repetitive controller using the information on the performance of the existing feedback control system. We first show that a robust stability condition of repetitive control systems is obtained using the well-known robust performance condition of general feedback control systems. It is also shown that we can obtain a steady-state tracking error described in a simple form without time-delay element if the robust stability condition is satisfied for the repetitive control system. From the obtained results, several design criterions for repetitive controller are provided. Through the simulation study, the feasibility of the proposed method is verified.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.99-104
• /
• 2019

Solar power generation systems require maximum power point tracking (MPPT) control to acquire maximum power using inefficient and high-cost PV modules. Most conventional MPPT algorithms are based on the slope-tracking concept. The perturb and observe (P&O) algorithm is a typical slope-tracking method. The two factors that determine the MPPT performance of P&O algorithm are the MPPT control period and the magnitude of the perturbation voltage. The MPPT controller quickly moves to the new maximum power point at insolation change when the perturbation voltage is set to large, and the error of output power will be huge in the steady state even when insolation is not changing. The dynamics of the MPPT controller can be accelerated even though the perturbation voltage is set to small when the MPPT control period is set to short. However, too short MPPT control period does not improve MPPT performance but consumes the MPPT controller resources. Therefore, analyzing the performance of the MPPT controller is necessary for actual insolation conditions in real weather environment to determine the optimum MPPT control period and the magnitude of the perturbation voltage. This study proposes an optimum MPPT control period that maximizes MPPT efficiency by measuring and analyzing actual insolation profiles in typical clear and cloudy weather in central Korea.

• 한국정보통신학회논문지
• /
• 제15권7호
• /
• pp.1447-1456
• /
• 2011

본 논문에서는 다중 입력을 가지는 비선형 시스템의 제어기 설계를 위한 다중 입력 T-S 퍼지 궤환 선형화 기법이 제안되었으며 그 기법을 바퀴형 이동로봇의 궤도 추적 제어를 위한 제어기를 설계하는 데에 사용하였다. 이를 위하여, 먼저 바퀴형 이동로봇의 에러 동특성 방정식을 T-S 퍼지 모델로 나타내었고, 이 퍼지 모델을 비선형 퍼지 좌표 변환과 비선형 상태 궤환 입력에 의해 하나의 선형 제어 시스템으로 변환시켰다. 시뮬레이션 결과는 본 논문에서 제안된 다중 입력 궤환 선형화 기법에 의해 설계된 궤도 추적 제어기가 T-S 퍼지 시스템을 제어하기 위해 널리 사용되어지는 기존의 PDC 기법에 의해 설계된 궤도 추적 제어기보다 더 나은 성능을 제공함을 보여주었다.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.477-486
• /
• 2016

This paper presents the area classification, identification, and tracking for multiple moving objects with the similar colors. To do this, first, we use the GMM(Gaussian Mixture Model)-based background modeling method to detect the moving objects. Second, we propose the use of the binary and morphology of image in order to eliminate the shadow and noise in case of detection of the moving object. Third, we recognize ROI(region of interest) of the moving object through labeling method. And, we propose the area classification method to remove the background from the detected moving objects and the novel method for identifying the classified moving area. Also, we propose the method for tracking the identified moving object using Kalman filter. To the end, we propose the effective tracking method when detecting the multiple objects with the similar colors. Finally, we demonstrate the feasibility and applicability of the proposed algorithms through some experiments.