• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.194-198
• /
• 2014

In recent years, RGM(roller gear mechanism) systems, wherein one of the gears of a meshing gear pair is replaced with pins or rollers, have been reintroduced, which is a consequence of, and therefore a reflection of, the rapid advances made in manufacturing technology. Three RTG(roller track gear) systems for arbitrary path transportation (e.g., L-, O-, U-, and S-shaped tracks) were constructed using two out of three RGM systems, namely, the CRP(cam rack pinion), CRG(cam ring gear), and RPG(roller pinion gear) systems, and are introduced in this paper. We also present three ways to prevent the intersection and non-contact phenomena at the teeth in the vicinity of the conversion point between two joined RGM systems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1207-1212
• /
• 2007

The critical speed of railway bogie related to the stability of the railway rolling-stock is important. Testing of the dynamic performance of bogie is conducted using a roller rig in a laboratory in place of field testing on track. This roller rig is composed of two rollers equivalent to track and used to test the dynamic characteristics of vehicle. But, the geometrical characteristics of the wheel/roller contact on the roller rig are different from those of the wheel/rail contact because the longitudinal radius of roller is not infinite compared with rail. This difference has influence on the wheelset behavior and the critical speed of bogie. Therefore in this paper, we have studied the behavior of wheelset and bogie on the roller rig for railway bogie testing with the purpose of developing the scaled roller rig. As an analysis results, it has been shown that the critical speed of bogie on the roller rig is slightly lower than that of bogie on track.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1186-1195
• /
• 1993

The Japanese type combine harvester has adopted rubber crawlers for the driving mechanism from first production . However, combine harvesters with movable track rollers in the rubber crawler system have been adopted recently for the purpose of stability at the time of climbing over the footpaths between rice fields, as the results of the machines becoming large. However, the dynamic characteristics of movable track rollers have not been clarified. For this reason, the design of movable track rollers depends on trial and errors. It is known that vibration characteristics of the vehicle with movable track rollers are different from the vibration characteristics of the vehicles with fixed track rollers even though the track roller arrangements are the same. Therefore, the theoretical analyses of movable track rollers must be hurried in order to formulate a reasonable track roller arrangement design. the authors have studied the vibration characteristics of the rubber crawler ve icle with fixed track rollers. in this study, the dynamic model of the vehicle with movable track roller sis compared with the dynamic model of the vehicle with fixed track rollers. Next, motions are simulated to analyze the movable track rollers by expanding the motion equation which were constructed for the dynamic model of the fixed track rollers.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.139-145
• /
• 2000

The mechanism of the inner resistance in a rubber crawler system has been investigated to reduce the power requirement (Kitano et al. 1994). The rolling resistance of the track roller, which is one of the major inner resistances, was measured for seven different vertical loads. The rolling resistance changed periodically and could be classified into three types. In case of the vertical load less than 500N, the rolling resistance was almost constant. For the vertical load greater than 500N, the maximum value of the rolling resistance increased. Further more in case of the vertical load greater than 1200N, negative resistance appeared. Analytical simulation of the travel resistance based on experimental results and static equilibrium equations derived from three-dimension mechanical model for the rubber crawler system. It was found that the simulation method was carried out to evaluate the travel resistance occurred by the rolling resistance of the track roller. The rolling resistance for each track roller arrangement and effects of the lug phase in the right and left rubber crawler could be estimated quantitatively.

• 대한기계학회논문집A
• /
• 제40권8호
• /
• pp.743-750
• /
• 2016

트랙롤러는 건설기계의 무한궤도 메카니즘에 장착되어 차량에 가해지는 하중을 지지하는 역할을 하는 핵심부품이다. 건설기계의 작업환경은 매우 가혹하며, 이러한 환경에 노출된 트랙롤러는 반복되는 주행충격으로 누유 및 파손 등의 고장을 발생하게 된다. 트랙롤러의 고장이 발생하면 건설기계 차량의 주행에 큰 영향을 미치게 되므로, 트랙롤러 생산업체에서는 자체시험을 수행하여 제품의 성능을 확인하고 있다. 하지만 현재 트랙롤러 대부분의 시험은 수직하중을 가한 상태의 시험만을 수행하고 있다. 이는 트랙롤러가 장착된 건설기계의 선회주행시 발생되고 있는 수평방향에서 가해지는 하중을 고려하지 않은 시험평가로 실제 주행조건을 재현하지 못하는 문제점이 있다. 따라서 본 논문에서는 트랙롤러에 가해지는 수직 및 수평방향 하중 크기와 이를 고려한 시험조건을 정립하였다. 또한 수평방향 하중이 트랙롤러의 고장에 미치는 영향에 대한 해석과 시험의 결과를 제시하였다.

• 한국운동역학회지
• /
• 제18권4호
• /
• pp.191-199
• /
• 2008

본 연구는 인라인 롤러스케이트의 가장 단거리인 300m 경기의 스타트 동작 분석을 함으로써, 지도자 및 선수들에게 스타트 기술에 대한 기초적이고 과학적인 자료를 제공하는데 목적이 있다. 연구의 대상은 국가 대표급 남자 선수 5명을 대상으로 3차원 영상분석을 통하여 인라인 롤러스케이트 T300m 종목의 스타트 동작을 분석하여 다음과 같은 결론을 도출하였다. 1)스타트 국면에서의 소요시간에서 P1에서의 시간이 절대적으로 영향을 미치고 있으므로 트레이닝을 통해 하지근력을 강화해야 한다. 2)스타트 속도를 증가시키기 위해서는 상체를 일으켜 세워 달리는 듯한 자세가 되어야 빠른 가속도를 얻을 수 있다. 3)상체의 전경각도는 출발시 뒤다리에 체중을 두고 반작용을 주는 자세에서 조금 세웠다가 첫발(오른발)이 진행되면서 착지할 때는 구부린 자세로 달리는 자세로 글라이딩 해야 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.296-300
• /
• 2007

Roller rigs have been built widely to study and evaluate the dynamic behaviors of railway vehicles, and they have particularly been applied to the development and routine maintenance of high-speed trains. However, there is no roller rig for routine maintenances of high speed train in Korea, although high speed train is running on the lines. Therefore, it is very important issue to check and evaluate the dynamic responses of high speed train after several years of operation. This paper presents a study on the conceptual design and dynamic model to develop the roller rig for the routine maintenances of high speed trains. The roller rig has two independent electronic motor and maximum speed of 350km/h, which can simulate running on straight and curved track. CATIA V5 was used to design the 3D geometrical models and ADAMS was used to verify and analyze the dynamic behaviors of roller rig.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.83-91
• /
• 2021

A crawler crane, which consists of a lattice boom, a driving system, and a movable vehicle, is widely used on construction sites. The crawler crane often traverses rough terrain at these sites; as a result, an overload limiter needs to be installed on the crane to prevent it from overturning and breaking. In this paper, we studied the distributed load change in relation to boom length and the angle of rotation of the roller that comes in direct contact with the grounded track shoe. First, we developed a 3D model of a crawler crane and meshed it for finite elements. Then, we performed finite element analysis to derive the load on the roller. Finally, we graphed and examined the roller distributed load data of the case according to boom length and rotation angle. By detecting the load on the roller of the crawler crane, we can predict the potential for the crane to overturn before it happens.

• 드라이브 ㆍ 컨트롤
• /
• 제13권1호
• /
• pp.84-88
• /
• 2016

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.301-305
• /
• 2007

The performance of the railway bogie is classified into the stability and the steering performance. Testing for the bogie stability is conducted on the roller rig. But testing for the bogie steering performance on test facility is very difficult, so the testing for the vehicle curving performance is conducted on the real curve track. And it is desirable to test on the full scale test rig, but it caused many problems relating to test costs, test time. To overcome these problems, the small scale test rig is actively used in the field of bogie stability. Thus, in this paper, we have studied the scale track to test the bogie steering performance. For this, we designed the 1/5 scale test track equivalent to radius 200 curve and confirmed the validity of the testing for the bogie steering performance on the scale curve track through the testing using 1/5 scale bogie.