• 동력기계공학회지
• /
• 제11권1호
• /
• pp.76-81
• /
• 2007

The objective of this study is to find the optimum design of a snubber using CFD analysis. Several dimensions such as snubber height(H), snubber diameter(D), buffer width and buffer angle are considered in this study. The present study shows that the CFD can be applied to study the pressure characteristics inside the snubber. The objective of the snubber design optimization are to minimize a pressure loss and the pulsation ratio. Numerical results such as particle track, pressure distribution and turbulent kinetic energy are used to analyze the critical area and pressure behavior inside the snubber. As a result, snubber model with H/D ratio of 3.23 and buffer angle of $40^{\circ}$ has a minimum pressure loss. On the other hand, snubber model with H/D ratio 4.41 and buffer angle $10^{\circ}$ has a minimum pulsation ratio.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.335-346
• /
• 2010

Recently, ESA (European Space Agency) has launched CryoSAT-2 for polar ice observations. CryoSAT-2 is equipped with a SIRAL (SAR/interferometric radar altimeter), which is a high spatial resolution radar altimeter. Conventional altimeters cannot measure a precise three-dimensional ground position because of the large footprint diameter, while SIRAL altimeter system accomplishes a precise three-dimensional ground positioning by means of interferometric synthetic aperture radar technique. In this study, we developed an efficient SIRAL SARIn mode processing technique to measure a precise three-dimensional ground position. We first simulated SIRAL SARIn RAW data for the ideal target by assuming the flat Earth and linear flight track, and second accessed the precision of three-dimensional geopositioning achieved by the proposed algorithm. The proposed algorithm consists of 1) azimuth processing that determines the squint angle from Doppler centroid, and 2) range processing that estimates the look angle from interferometric phase. In the ideal case, the precisions of look and squint angles achieved by the proposed algorithm were about -2.0 ${\mu}deg$ and 98.0 ${\mu}deg$, respectively, and the three-dimensional geopositioning accuracy was about 1.23 m, -0.02 m, and -0.30 m in X, Y and Z directions, respectively. This means that the SIRAL SARIn mode processing technique enables to measure the three-dimensional ground position with the precision of several meters.

• 한국철도학회논문집
• /
• 제15권5호
• /
• pp.476-484
• /
• 2012

본 연구에서는 국내에서 보편적으로 사용되는 최대입경이 38mm에 이르는 쇄석 강화노반재료에 대한 동적 변형특성을 평가하기 위하여 직경 D=10cm, 길이 L=20cm의 시편을 시험할 수 있는 Stokoe방식의 고정단-자유단 중형 공진주 시험기 및 구동시스템과 해석프로그램을 제작하였다. 이렇게 완성된 중형 공진주 시험기를 이용하여 우리나라의 대표적인 석산 쇄석 강화노반재료에 대하여 공진주 시험을 수행하였다. 또한 소형(D=5cm) 공진주 시험기를 이용하여 동일한 재료로 시험을 수행하여 전단탄성계수(G) 감소곡선과 정규화 전단탄성계수($G/G_{max}$) 및 감쇠비(D) 곡선을 구하고 소형과 중형 공진주 시험결과에 대한 비교 분석을 실시하였다.

• 한국태양에너지학회 논문집
• /
• 제30권3호
• /
• pp.98-107
• /
• 2010

This paper introduces step by step procedures for the design, fabrication and operation of a solar tracking system. The system presented in this study consists of motion controllers, motor drives, step-motors, feedback devices and other accessories to support its functional stability. CdS sensors are used to constantly generate feedback signals to the controller, which assures a high-precision solar tracking even under adverse conditions. It enables instant correction if the system goes off track by strong winds causing gear backlash. A parabolic dish concentrator is mounted on the tracking system whose diameter was 30cm. The solar position data, in terms of azimuth and elevation, sunrise and sunset times were compared with those of the Astronomical Applications Department of the U.S. Naval Observatory. The results presented here clearly demonstrate the high-accuracy of the present system in solar tracking, which are applicable to many existing solar systems.

• 수산해양기술연구
• /
• 제44권3호
• /
• pp.218-228
• /
• 2008

This paper describes on the real-time tracking of ship's dynamic behavior by AIS information in the coastal waters. The AIS data was received at a land station by using the antenna of AIS receiver mounted on the rooftop of the laboratory, Pukyong National University (PKNU), Busan, Korea, and stored as a NMEA format of serial output sentence of VDM(VHF Data-Link Message) and displayed on the ENC(Electronic Navigational Chart) of a PC-based ECDIS. In this study, the AIS receiver was mainly used to obtain the dynamic information that is necessary to evaluate and track the movement situation of training ship "KAYA" of PKNU in the coastal waters. The change of position with time for the ship turning under the rudder angle of port $30^{\circ}$ was correctly tracked with the turning circle of 940 m in diameter on the ENC of a PC-based ECDIS. Then, the dynamic information of the AIS system was updated every 6.29 seconds under the turning situation for the speed of 10.9 knots and every 21.65 seconds under the situation running at the speed of 11.05 knots on the straight line route of $155^{\circ}$, respectively. In case of AIS target tracking in the inshore zone behind large topographical obstructions, such as mountain and apartment buildings, the update rate of dynamic information was irregularly changed by the existence of land obstacles. However, the position tracking by AIS information under the situation existing no sea obstructions was achieved in real or near real-time and the instant presentation of course alternations for the ship was correctly monitored by using a PC-based ECDIS. From these results, we concluded that the PC-based ECDIS technology and methodology combined with the AIS information can be easily extended and applied to the surveillance and management for the fishing operation of fishing vessels in the coastal zone and in the EEZ fishing grounds.

• 한국지구과학회지
• /
• 제33권7호
• /
• pp.618-626
• /
• 2012

2007년 11월에 천연기념물 제487호로 지정된 화순군 서유리의 백악기 화석산지는 수각류 발자국 보행렬, 식물화석, 건열, 연흔, 수평층리 등 고환경을 연구하는데 중요한 자료들을 포함한다. 이 백악기 퇴적층은 하부에 직경 5-40 cm의 다양한 성분의 화산암역을 함유하며, 후기의 화순안산암에 의해 덮인다. 백악기 퇴적층과 동시퇴적된 6시료의 화산암역과 이 지층을 덮는 화순안산암 2시료를 대상으로 전암을 이용한 K-Ar법 절대연대측정을 실시하였으며, 그 결과 백악기말의 투로니안(90-70 Ma)에서 신생대 초기인 플라이오세($63.4{\pm}1.2$, $62.1{\pm}1.2$ Ma)에 해당한다. 연대측정 결과 백악기 퇴적층의 퇴적시기와 공룡의 활동시기에 대한 최대지질연대는 약 70 Ma이다. 이 연대는 여수 사도지역에서 공룡발자국을 포함하는 백악기층의 퇴적시기(71-66 Ma)와 서로 대비될 가능성을 시사한다.

• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.211-220
• /
• 2000

과압밀 점토층에 설치된 4개의 직경 305 mm 현장타설 말뚝(1개의 일반 현장타설 말뚝과 불포화 점토층에서 발생하는 주면 마찰력을 경감시키기 위해 분리형 튜브를 사용한 3개의 분리형 현장타설 말뚝)의 거동을 분석 비교하기 위한 실험적 연구를 수행하였다. 흡수력 측정을 하기 위해 말뚝 주변에 지반흡수력 측정 장치를 설치하였고 지표면 표고 변화도 측정하였다. 지표면 표고는 최고 40 mm까지 팽창하였고, 일반 말뚝은 5 mm, 분리형 말뚝은 1.5 mm 미만의 말뚝 두부 수직인발변위가 관측되었다. 분리형 말뚝에서 관측된 주면마찰력은 일반형 말뚝에 비해 미소하여 분리형 튜브를 사용한 분리형 현장타설 말뚝이 주위 지반의 팽창 수축에 의해 말뚝에 발생하는 주면 마찰력을 경감시키는데 매우 효과적이었다.

• Journal of Radiation Protection and Research
• /
• 제11권2호
• /
• pp.130-138
• /
• 1986

CA 80-15 및 LR 115-1 cellulose nitrate 비적검출기를 사용하여 지표공기중의 ${\alpha}$방사능을 측정 해석하였는바 이 검출기의 검출효율은 $0.1{\mu}Ci$의 $^{241}Am\;{\alpha}$선을 사용하여 결정하였다. 지표에서 방출되는 라돈과 그 자핵종들에 의한 ${\alpha}$방사능을 검출하기 위하여 두가지의 라돈컵을 사용하였으며 이들을 각각 지름이 15cm, 깊이가 45cm인 이웃한 두개의 땅구덩이를 만들어 그 안에 설치하여 일정기간 ${\alpha}$방사능에 노출하였다. 두 라돈컵중 하나는 구덩이 지표면에 거꾸로 밀착시켜 밀폐공간이 되게 하고 다른 하나는 바닥에서 일정한 거리를 띄우고 컵 윗면에 구멍을 뚫어 공기의 소통이 가능하도록 하여 그 검출결과를 비교 검토하였다. ${\alpha}$입자에 피폭된 비적검출기는 부식처리한 후 현미경으로 판독하고 통계분석 하였으며 그 결과를 지표공기 단위부피당 ${\alpha}$방사능농도로 환산 평가하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권1호
• /
• pp.28-39
• /
• 2007

The purpose of this study is to evaluate the regenerative capacity of reconstruction in the atrophied posterior maxilla by comparing bone graft procedures and alveolar distraction osteogenesis (ADO) techniques. We performed the autogenous iliac bone graft (AGB group, 5 specimens in 3 patients), and the combination (Mixed group, 3 specimens in 3 patients) of the autogenous and deproteinized bovine bone ($Bio-Oss^{(R)}$, Geistlich Co., Switzerland) as the ratio of 2:1 in the sinus floor elevation procedures. ADO procedures using $TRACK^{(R)}$ (KLS Martin Co., Germany) were also performed to augment vertical alveolar height in atrophied posterior maxilla (ADO group, 5 specimens in 4 patients). Newly generated bone tissues were obtained with the 2.0mm diameter trephine bur (3i Co., USA) during implant fixture installation after 5-7 months. Routine histolomorphological observation, immunodot blot assay for quantitative evaluation, and immunohistochemical staining with antibodies to MMP-1, -9, -10, TIMP-1, -2, and BMP-2, -4 were all carried out. Lamellar bone formation was well shown in all specimens and new bone formations of ADO group increased than those of other procedures. In immunohistochemical staining, the strong expression of BMP-2 was shown in all specimens, and immunodot blot assay showed that bone formation is accompanied by the good induction of factors associated with angiogenesis and appeared more increased amount of osteogenic and angiogenic factors in ADO group. ADO is the most effective technique for new bone formation compared to sinus floor elevation with autogenous or mixed bone graft in the atrophied posterior maxilla. In the quantitative immunodot blot assay, the regenerated bone after ADO showed more increased products of VEGF, BMP-2, PCNA and MMP-1 than those after the other procedures, and these findings were able to be confirmed by immunohistochemical stainings.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.277.2-277.2
• /
• 2013

Petri dishes and glass slides have been widely used as general substrates for in vitro mammalian cell cultures due to their culture viability, optical transparency, experimental convenience, and relatively low cost. Despite the aforementioned benefit, however, the flat two-dimensional substrates exhibit limited capability in terms of realistically mimicking cellular polarization, intercellular interaction, and differentiation in the non-physiological culture environment. Here, we report a protocol of culturing embryonic rat hippocampal neurons on the electro-spun polymeric network and the results from examination of neuronal cell behavior and network formation on this culture platform. A combinatorial method of laser-scanning confocal fluorescence microscopy and live-cell imaging technique was employed to track axonal outgrowth and synaptic connectivity of the neuronal cells deposited on this model culture environment. The present microfiber-based scaffold supports the prolonged viability of three-dimensionally-formed neuronal networks and their microscopic geometric parameters (i.e., microfiber diameter) strongly influence the axonal outgrowth and synaptic connection pattern. These results implies that electro-spun fiber scaffolds with fine control over surface chemistry and nano/microscopic geometry may be used as an economic and general platform for three-dimensional mammalian culture systems, particularly, neuronal lineage and other network forming cell lines.