• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2002년도 춘계학술발표논문집(하)
• /
• pp.700-704
• /
• 2002

본 논문은 UML로 모델링 된 Track&Trace 시스템[1]을 확장성과 유연성이 뛰어나며, 웹 상에서 안전하고 신뢰성 있으며 다양하고 광범위한 데이터 교환을 위한 XML로의 설계에 관한 연구이다. 이를 위해 UML 클래스 다이어그램의 클래스, 멤버 데이터와 데이터 타입을 이용해 Well-Formed XML에서 요소와 컨텐츠로 변환한다. 이러한 XML의 구조를 명확하게 정의하기 위해 클래스 다이어그램의 데이터 타입과 다중성을 이용해 DTD를 설계하고, 동시에 확장성을 갖춘 XML 스키마를 설계한다. 또한, XML 문서와 독립적으로 출력을 위한 스타일 지점인 CSS 와 XSL도 설계한다.

• 대한화학회지
• /
• 제61권5호
• /
• pp.231-237
• /
• 2017

Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was $1277.1m^2{\cdot}g^{-1}$, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to $0.53mmol{\cdot}g^{-1}$, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, AC-P700 possesses better regeneration ability and reusability.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2642-2646
• /
• 2012

Pretreatment of spent FCC catalyst and its application in remove trace olefins in aromatics were investigated in this research. The most effective pretreatment route of spent FCC catalyst was calcining at $700^{\circ}C$ for 1 h, washing with 5% oxalic acid solution in ultrasonic reactor and dried. Treated spent FCC catalyst was modified with metal halides, then to prepare catalyst to remove trace olefins in aromatics. X-ray diffraction, Pyridine-FTIR, $N_2$ adsorption-desorption and inductively coupled plasma optical emission spectrometer (ICP-OES) were used to investigate the pretreatment process. The result showed that the performance of the treated spent FCC catalyst was much greater than that of the spent FCC catalyst, which indicted the possibility and improvement of this research.

• 설비공학논문집
• /
• 제27권1호
• /
• pp.44-49
• /
• 2015

Ceiling cooling and heating system that consider load arrangement and space in the ceiling needs to be developed. Therefore, experimental and economic changes were done to verify the performance of compact type VAV. The test results were as follow. 1) Noise test result, measuring approximately 50.4 dB~56.6 dB (before ceiling in landfill), had a better ceiling deadline than the current measure, about a 10 dB noise reduction, so that the office baseline (40~50 dB) noise was judged to be less than test. 2) For the static pressure test result, taking out an outside hydrostatic 25 mmAq, 24.8 mmAq was measured, respectively, at the point. 3) For the life-cycle cost analysis result, the initial investment cost, maintenance replacement costs, and maintenance costs increased 0.2%, but the energy savings ratio was 19.5% while the whole life cycle savings of 40 years LCC was reduced 11.9%.

• Bulletin of the Korean Chemical Society
• /
• 제20권6호
• /
• pp.696-700
• /
• 1999

A method has been developed for the determination of trace anion impurities in concentrated hydrogen peroxide. The method involves on-line decomposition of hydrogen peroxide, ion chromatographic separation and subsequent suppressed-type conductivity detection. H2O2 is decomposed in Pt-catalyst filled Gore-Tex membrane tubing and the resulting aqueous solution containing analytes is introduced to the injection valve of an ion chromatograph for periodic determinations. The oxygen gas evolving within the membrane tubing escapes freely through the membrane wall causing no problem in ion chromatographic analysis. Decomposition efficiency is above 99.99% at a flow rate of 0.4mL/min for a 30% hydrogen peroxide concentration. Analytes are quantitatively retained. The analysis results for several brands of commercial hydrogen peroxides are reported.

• Bulletin of the Korean Chemical Society
• /
• 제14권6호
• /
• pp.696-700
• /
• 1993

Gold bonding wire of 0.076 mm in diameter used in semiconductor industry, is dissoved in aqua regia. The solution is then evaporated to near dryness several times with a few drops of HCl added to prepare the final sample solution in 5% HCl. The gold matrix is separated from trace impurities by controlled potential deposition. The whole electrolysis has been carried out inside a clean bench. An optimum potential is found to be +0.25 V to give more than 99.9% Au matrix removal with better than 90 analytes remaining in the electrolyte solution. Isotope dilution calibration is employed to get the best accuracy and precision. Analytical results are presented with determination limits of the analytical method.

• 대한수의학회지
• /
• 제43권3호
• /
• pp.393-398
• /
• 2003

Simple and rapid sample preparation method for trace elements in foods of animal origin using ultra high pressure microwave digestion system (UHP/MDS) and inductively coupled plasma atomic emission spectrometer (ICP/AES) were developed. 1. For the digestion of sample using UHP-MDS, 20% nitric acid (v/v) was the most suitable solvent for the determination of trace elements in foods of animal origin. 2. The optimal digestion conditions for UHP-MDS were as follows: final temperature $180^{\circ}C$, final pressure 400 PSI, and magnetic power 900 W in the solid sample. For the liquid sample final temperature $170^{\circ}C$, final pressure 300 PSI and magnetic power 700 W were optimal conditions. 3. As result of interlaboratory test, the average recovery rate of the for solid sample were 88.3~99.1% for As, 82.4~93.3% for Cd, 89.2~101.2% for Hg and 86.5~93.8% for Pb, respectively. In liquid sample, it were 87.0~96.8% for As, 80.9~96.6% for Cd, 87.5~91.2% for Hg and 91.4~95.5% for Pb, respectively. 4. The average coefficient variation rate were 3.3~15.9% for solid sample and 2.9~10.8% for liquid sample.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.178-189
• /
• 1994

$BaTiO_3$ 미분말은 여러종류의 0.05 M 출발용액으로부터 초음파 분무 열분해법으로 합성하였다. 이때, 유속은 0.5 cm/sec, 저온로는 $300^{\circ}C$, 고온로는$700^{\circ}C$로 고정하였다. 입자의 형성과정은 반응 단계별로 포집된 분말을 SEM으로 직접 관찰하였고 또한, 반응기내에서의 입자의 거동을 이론적으올 고찰하고자 하였다. 순수한 $BaTiO_3$ 미분말은 출발용액이 nitrate aqueous solution인 경우에 합성이 가능하였다. 합성된 미분말은 19.1 nm의 일차입자들로 구성된 porous한 약 $0.42 {mu}m$크기의 구형의 이차임자였다. 형성과정은 건조단계에서 입자의 크기가 감소한 후 열분해 초기단계에서 증가하고 반응이 진행됨에 따라 점차 다시 감소하여 최종 $0.42 {mu}m$의 고화된 입자로 되었고 입도분포는 반응이 진행됨에 따라 점차 넓어졌다. 또한, 반응기내에서 입자들의 이론적 거동은 반응기 중심쪽으로 향하여 진행된다.

• 보존과학연구
• /
• 통권20호
• /
• pp.91-120
• /
• 1999

This paper presents the results of investigation on crystal, firing temperature and trace elements analysis of fragments 4~8 centriesexcavated from Kyong ju historical sites such as Wang kyong,Walsung, Hwangnam great tomb by application of optical microscope, neutron activation analysis and X-ray diffraction. Temper analysis of clay for identification of local or foreign production; Trace elements is not presented a unique chemical composition. That’s data have to be treated a statistical process in order to normalize. The results followed ;(1) Firing temperature could be estimated $700^{\circ}C$ on some softness pottery at Walsung and most of hardness others are $1,000^{\circ}C$ to $1,200^{\circ}C$.(2) Crystal structures are divided into three kinds of mineralogical composition(Quartz, Mullite, Feldspar).(3) Considering of the results of statistical data, chemical composition of Walsung is more similarly Wang kyong than Hwangnam great tomb.

• 보존과학회지
• /
• 제23권
• /
• pp.67-72
• /
• 2008

경기도 평택 희곡리 토탄층(약 5,700~5,900년전(前))에서 수침상태로 출토된 물푸레나무속 1종과 오리나무속 1종을 대상으로 전자현미경 관찰을 통하여 수종에 따른 분해정도와 형태를 조사하였다. 관찰결과 두 수종 모두 연부후와 박테리아에 의한 세포벽 공격형태와 분해형태는 거의 유사하였다. $S_2$층부터 복합세포간층 방향으로 점진적으로 불규칙하게 분해하는 침식형 박테리아와 목재세포벽을 분해하여 $S_2$층에 터널을 만드는 터널형 박테리아가 관찰되었다. 침식형 박테리아는 종종 연부후균에 의한 공동과 유사하지만 크기가 작은 공동을 형성하였다. 도관요소를 제외한 다른 세포들의 세포벽은 극심히 분해되었지만 세포벽의 외형은 수분으로 인해 그 고유한 형태를 유지하고 있었다. 해양천공충의 식흔 흔적이 발견되지 않고 연부후균과 박테리아에 의한 분해 형태만 발견되어 평택희곡리 토탄지역 형성 당시인 5,700~5,900여년전이 온난화에 의한 홀로세 기후최적기 기간중이기 때문에 서해안 해수면 상승에 의해 해수에 침수되었을 것이라는 가설은 사실이 아닌 것으로 해석되었다.