• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.42-50
• /
• 2009

Samples of subway dust were collected by the air filter system of 30 subway stations on Daegu subway line 1 in January 2008. Samples were sieved below 100 ${\mu}m$, and 14 elements were analyzed using ICP after acid extraction. Results obtained from the source assessment of trace elements using enrichment factor showed that Ca, Fe, K, Mg, Mn, Na, V were influenced by natural sources such as weathered rock and resuspended soil, while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources such as fuel combustion and waste incineration. Concentrations were remarkably higher in components from natural sources than in components from anthropogenic sources. Anthropogenic sources were significantly affected by indoor dusts than outdoor dusts. Results of pollution indices of heavy metals indicated that indoor dusts were more contaminated with heavy metal ions than outdoor dusts. The correlation analysis among trace elements indicated that components were much correlated in the order of natural sources-anthropogenic sources, anthropogenic sources-anthropogenic sources, natural sources-natural sources in both indoor and outdoor dusts. Trace element components of outdoor dusts were largely correlated than those of indoor dusts. In addition, indoor dusts were significantly affected by outdoor dusts rather than depth from the surface or the average daily number of subway passengers.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.321-334
• /
• 1995

Basic studies for the effective extraction of ammonium pyrrolidine dithiocarbamate(APDC) complexes of Co(II), Ni(II) and Cu(II) into a solvent have been performed. The maximum distribution ratio was appeared (log D=1.3543) at pH 2.0 and the partition coefficient was 2.489 in the extraction of $4{\times}10^{-5}M$ APDC itself into chloroform. From the UV/visible spectra of metal-chelates in aqueous and organic solutions, the pH to form stable 1:2 metal-ligand complexes were Co(II):5.0, Ni(II):8.0 and Cu(II):8.0, respectively and only 1 minute was enough to be partitioned into the chloroform. Besides, the partition and extraction equilibria of the complexes were investigated by back-extracting $10.0{\mu}g/ml$ metal-chelates from the solvent into an aqueous solution beacuse of their slight solubilities in the aqueous solution. The distribution coefficients and extractabilities were as follows : at pH 6.5~8.5 of the aqueous solution, log D=2.834 : E(%)=99.9% for $Co(PDC)_2$, at pH 11, log D=5.699 E%=100 for $Ni( PDC)_2$, and at pH 6.0, log D=2.025 : E(%)=99.1% for $Cu(PDC)_2$. And the extraction and formation constants were log $K_{ex}=9.671$ : log ${\beta}_2=6.938$ for $Co(PDC)_2$, log $K_{ex}=9.646$ : log ${\beta}_2=7.071$ for $Ni( PDC)_2$, and log $K_{ex}=9.074$ : log ${\beta}_2=7.049$ for $Cu(PDC)_2$, respectively. From these results, an optimum extraction procedure can be constructed for the separative concentration of trace metallic ions, and the quantitative determination of them in advanced materials and environmental samples will be expected without any influence of sample matrixes.

• Journal of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.207-215
• /
• 1986

A new method was proposed to improve removal of nitrogen oxides $(NO_x)$ in exhaust gas by the reduction method using ammonia. At the relative humidity of 60%, 50 ppm of $NO_x$ was decomposed at the rate of 1% per hour in the reaction chamber. On the other hand, by adding $NH_3$ which was 5 times more concentrated than NOx, the decomposition rate increased to 6% per hour for 50 ppm $NO_x$ and 10% per hour for 20ppm $NO_x$. Within the actual exhausted gases, the decomposition rate of $NO_x$ reached the maximum 15% per hour because of coexisted reducing gases, such as hydrocarbon and carbon monoxide, and excess humidity containing trace metal ions. In the presence of acidic $SO_2$ gas, the decomposition rate of $NO_x$ decreased. The decomposition of $NO_x$ seems to be caused by the mist which is added to the system, and $NH_3$ in the mist which reduces $NO_x$.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.4
• /
• pp.209-220
• /
• 2016

Clay minerals are a major player to determine geochemical cycles of trace metals and carbon in the critical zone which covers the atmosphere down to groundwater aquifers. Molecular dynamics (MD) simulations can examine the Earth materials at an atomic level and, therefore, provide detailed fundamental-level insights related to physicochemical properties of clay minerals. In the current study, we have applied classical MD simulations with clayFF force field to dioctahedral clay minerals (i.e., gibbsite, kaolinite, and pyrophyllite) to analyze and compare structural parameters (lattice parameter, atomic pair distance) with experiments. We further calculated vibrational power spectra for the hydroxyls of the minerals by using the MD simulations results. The MD simulations predicted lattice parameters and interatomic distances respectively deviated less than 0.1~3.7% and 5% from the experimental results. The stretching vibrational wavenumber of the hydroxyl groups were calculated $200-300cm^{-1}$ higher than experiment. However, the trends in the frequencies among different surface hydroxyl groups of each mineral was consistent with experimental results. The angle formed by the surface hydroxyl group with the (001) plane and hydrogen bond distances of the surface hydroxyls were consistent with experimental result trends. The inner hydroxyls, however, showed results somewhat deviated from reported data in the literature. These results indicate that molecular dynamics simulations with clayFF can be a useful method in elucidating the roles of surface hydroxyl groups in the adsorption of metal ions to clay minerals.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.3
• /
• pp.197-206
• /
• 2010

To provide baseline information essential for assessing environmental impacts of monsoon rainfalls in a mountainous watershed under mixed land use, we investigated spatiotemporal variations in water quality using a combined approach of seasonal water quality survey and intensive storm samplings. Biannual water sampling at nine locations encompassing major land use types showed generally lower electrical conductivity and Cl- concentrations during the typical wet period compared to the dry period, indicating rainfall-induced dilution of dissolved ions. Total metal concentrations, however, were significantly higher during the monsoon period, probably associated with rainfall-induced increases in suspended sediments. Intensive storm sampling during a small monsoon rainfall event (18 mm) and an extreme event (452 mm) showed rapid changes in both suspended sediments and dissolved solutes in an agricultural stream draining the Haean Basin where arable lands have expanded rapidly over the recent decades. By contrast, a nearby forest stream derived from North Korea showed little responses to the small event compared to larges changes during the extreme event. In the agricultural stream total Pb concentrations showed significant positive relationships with suspended sediments. Although limited sampling frequency and locations require a cautious interpretation, the overall results suggest that expansion of agricultural fields in steep mountainous watersheds can increase the susceptibility of soil erosion and its off-site environmental impacts under increasing rainfall variability and extremes.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.764-768
• /
• 2003

Resveratrol is natually occurring phytoalexin compounds produced by grape berries, peanuts, and their products in response to stress such as fungal infection, heavy metal ions or UV irradiation. The objective of this study was to develop a reliable high-performance liquid chromatographic method for the quantitative determination of trans-resveratrol in grape and its products. The trans-resveratrol was separated isocratically on Nucleosil 100-5 C18 column, using a mobile phase containing acetonitrile : water (40 : 60, v/v), detected by UV detector at 306 nm and the flow rate was 0.3 mL/min. Under this analytical condition, the recoveries of trans-resveratrol in grape, wine, and grape juice were 92.35, 104.72, and 91.08, respectively. Limit of detection in grape, wine, and grape juice were 14.5 ng/g, 3.62 ng/mL, and 4.02 ng/mL. Also, limit of quantitation in grape, wine, and grape juice were 14.8 ng/g, 3.69 ng/mL, and 4.10 ng/mL. Assay values of 32 grape varieties, 9 wines, and 9 grape juices were ranged from trace amount to $207.1\;{\mu}g/100\;g$, from 5.4 to $275.7\;{\mu}g/L$, and from 63.3 to $751.6\;{\mu}g/L$, respectively.