• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2006.02a
• /
• pp.116-123
• /
• 2006

생물체의 cDNA를 유리기판위에 고밀도로 첨착 시킨 유전자 칩과 정량적인 방법으로 개별 유전자 발현을 진단 가능한 Real- time PCR (실시간 고분자중합연쇄반응 기술) 기법은 첨단 의학분야와 신약개발 및 독성유전체 연구분야에 활발히 도입되고 있는 기술이다. 본 발표의 첫 번째 부분에서는 유전자칩 에서 얻어진 유전자 발현패턴분석에 기반한 바이오마커 선정 및 real time PCR에 의한 확증 관련 기술 과 유전자칩에서 얻어지는 수많은 데이터를 재정렬 및 다양한 분석기법과 display기술을 활용하여 광범위한 화학물질에 대한 독성효과 분석을 가능하게 해주며, 특정 독성물질에 대한 관련유전자 그룹 발견 및 독성영향에 따른 분류방법에 관한 결과를 발표할 것이다. 또한 바이오마커 활용의 하나로 박테리아세포 기반 바이오센서 제작및 세포칩 개발등에 대한 결과도 추가될 것이다. 두 번째 부분에서는 non-model organism(유전체정보가 확보되지 않은 생물체)인 송사리를 이용하여 새로운 2K 유전자칩을 개발하고, 여기서 각종 화학물질에 대하여 얻어진 수많은 유전자칩 분석 데이타를 활용하여 각각의 화학물질이 보여주는 독성효과를 매우 효과적이고 쉽게 이해할 수 있는 display기술을 개발, 적용함으로써 유전자칩 발현에 기반한 화학물질 독성 screening 및 specificity discrimination을 가능케 하는 예가 발표될 것이다. 이 연구에서 개발한 송사리 유전자칩은 간조직의 RNA를 직접 cDNA화 하는 방식을 취하고 있어 전체 송사리의 유전정보를 필요로 하지 않아 비용 및 효율에서 전체 송사리의 유전정보를 얻는 비용과 노력을 취하지 않고 간에서 발생하는 독성학적 영향 및 유전자의 발현정도를 정밀하고 효율적인 방법으로 얻어 낸다. 현재 2000여개의 cDNA유전자중 50%이상의 유전자가 17베타에스트라디올, 페놀, 노닐페놀, 비스페놀, 감마레이조사, 잔류약품중 이보프란, 다이클로펜악, 농약중의 파라???R, 돌연변이 유발물질 중의 이티비알, 금속류중의 카드뮴을 통해 발현양상과 특정 캐미칼별 발현 특이성이 조사되었고, 이들 유전자는 염기서열 분석을 통해 염기서열이 분석되었으며, 미국 NCBI의 유전자 은행과의 비교를 통해 일부유전자는 새로운 유전자로 밝혀지고 있다. 또한 이 발표에서는 소염진통제계열 의약품인 dichlofenac 이 송사리의 각종 조직에 미치는 독성영향을 Real-time PCR을 이용하여 대표적 스트레스 유전자의 발현에 미치는 영향에 대한 분석 예가 발표될 것이다.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.30-38
• /
• 2017

Established in the 1960s, high pressure underground pipelines in Ulsan and Yeosu industrial estate are underground as toxic gas as well as combustible gas that is heavier than city gas and low combustion range. Especially, industrial pipelines occupy more than 20 years old pipes. In this way, the industrial estate pipeline was installed before the introduction of the supervision of construction, However, unlike the city gas pipeline, the pipeline is managed without any legal obligation. In this study, the safety management status of high pressure underground pipelines and urban gas underground pipelines in the industrial estate is analyzed and comparison of laws, extent of damage impact, using the pipe inspection model for pipe inspection of high pressure piping system with the existing piping system. it is intended to cuntribute to improving the safety of industrial estate are underground pipeline.

• Clean Technology
• /
• v.2 no.2
• /
• pp.100-125
• /
• 1996

After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.

• Advances in environmental research
• /
• v.1 no.1
• /
• pp.15-35
• /
• 2012

Mercury (Hg) is a global environmental pollutant that has been the cause of many public concerns. One particular concern about Hg in aquatic systems is its trophic transfer and biomagnification in food chains. For example, the Hg concentration increases with the increase of food chain level. Fish at the top of food chain can accumulate high concentrations of Hg (especially the toxic form, methylmercury, MeHg), which is then transferred to humans through seafood consumption. Various biological and physiochemical conditions can significantly affect the bioaccumulation of Hg-including both its inorganic (Hg(II)) and organic (MeHg) forms-in fish. There have been numerous measurements of Hg concentrations in marine and freshwater fish worldwide. Many of these studies have attempted to identify the processes leading to variations of Hg concentrations in fish species from different habitats. The development of a biokinetic model over the past decade has helped improve our understanding of the mechanisms underlying the bioaccumulation processes of Hg in aquatic animals. In this review, I will discuss how the biokinetic modeling approach can be used to reveal the interesting biodynamics of Hg in fish, such as the trophic transfer and exposure route of Hg(II) and MeHg, as well as growth enrichment (the increases in Hg concentration with fish size) and biomass dilution (the decreases in Hg concentration with increasing phytoplankton biomass). I will also discuss the relevance of studying the subcellular fates of Hg to predict the Hg bioaccessibility and detoxification in fish. Future challenges will be to understand the inter- and intra-species differences in Hg accumulation and the management/mitigation of Hg pollution in both marine and freshwater fish based on our knowledge of Hg biodynamics.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.35-42
• /
• 2009

Headspace micro solid phase extraction using mulberry paper bag (HS-MPB-$\mu$-SPE) has been developed and validated for the analysis of volatile flavor compounds from five spice by gas chromatography-mass spectrometry (GC/MS). HS-MPB-$\mu$-SPE was performed with adsorbent particles enclosed inside a mulberry paper bag. Four different kinds of adsorbents such as Tenax TA, Porapack Q, dimethylpolysiloxane and polyethylene glycol were tested. The extraction solvents compared were petroleum ether, methylene chloride, and chloroform. Better results were obtained when Tenax TA and petroleum ether were used. The limit of detection (LOD) and the limit of quantitation (LOQ) were in the range of 1.3 ng/mL and 4.3 ng/mL, respectively, for o-cymene as a model compound of monoterpene. Proposed method showed good reproducibility (3.3%, RSD) and good recoveries (94.0%). The HS-MPB- μ-SPE is very simple to use, inexpensive, rapid, requires small sample amounts and solvent consumption. Because the solvent for extraction is reduced to only a very small volume (0.6 mL), there is minimal waste or exposure to toxic organic solvent and no further concentration step. This method allows successful characterization of the headspace in contact with the five spice sample. Strong trans-anethole from star anise or fennel is a characteristic flavor of five spice powders. HS-MPB-$\mu$-SPE combined with GC/MS can be a promising technique for the broad spectrum measurement of volatile aroma compounds from solid spices.

• Journal of the Korean Chemical Society
• /
• v.57 no.1
• /
• pp.88-93
• /
• 2013

In order to construct a controlled release system of drugs and to reduce toxic side effects of 5-fluorouracil, the novel ramose chitosan-based-5-fluorouracil microspheres (CS-FU-MS) were prepared. Firstly, using chitosan (CS) as carriers and 5-fluorouracil (5-FU) as a model drug, ramose chitosan-based-5-fluorouracil (CS-FU) was efciently synthesized by chemical crosslinking method through microwave irradiation, drug loading was 10.6%; Secondly, CS-FU-MS were prepared by CS-FU self-assembled under the dialysis conditions and the free 5-FU was encapsulated further at the same time. The size dispersivity of particles is uniform, and the average diameter of the CS-FU-MS was $4{\mu}m$. The drug encapsulation efficiency was 76.1%, and the drug loading was increased to 26.22%. CS-FU-MS maintain the zero-order release time in PBS (pH = 7.4) and HCl/KCl (pH = 1.2) dialysis medium was 40h and 34h respectively, and the cumulative release were 58.89% and 79.33% in 182 h. The results showed that CS-FU-MS have excellent sustained release properties.

• Animal cells and systems
• /
• v.16 no.4
• /
• pp.329-336
• /
• 2012

This study evaluated ecological health, using various biomarkers and bioindicators, of pale chub (Zacco platypus) as a sentinel species, in Daejeon Stream, South Korea, during AprilMay 2011. The biomarkers and bioindicators were compared among three sites of control: Reference ($C_z$), transition ($T_z$), and the urban zones ($U_z$); and the 7-Ethoxyresorufin-O-deethylase (EROD) activity, DNA damage, acetylcholinesterase (AChE) activity, and vitellogenin (VTG) concentrations were more significantly increased in the $U_z$ than in the $C_z$. Also, physiological markers such as condition factor, liver somatic index, visceral somatic index, and gonad somatic index were significantly increased in the $U_z$ than in the $C_z$. For the health assessments, three categorized parameters of blood chemistry, molecular biomarkers, and physiological bioindicators were standardized and calculated as a star-plot, representing values of Integrated Health Response (IHR). Values of IHR had more significant (P<0.05) increases in the $U_z$ than any other zones, indicating an impairment of ecological health by organic matter, nutrients (N, P), and toxic chemicals. This study is based on low levels of biological organization approach of molecular and physiological biomarkers and bioindicators, so further study of high-levels of biological organization approach such as community and population is required for overall range of health assessments. The approach of IHR values, however, may be useful in providing early warning of future impacts on ecological health.

• Molecules and Cells
• /
• v.38 no.2
• /
• pp.180-186
• /
• 2015

Escherichia coli AcrAB-TolC is a multidrug efflux pump that expels a wide range of toxic substrates. The dynamic nature of the binding or low affinity between the components has impeded elucidation of how the three components assemble in the functional state. Here, we created fusion proteins composed of AcrB, a transmembrane linker, and two copies of AcrA. The fusion protein exhibited acridine pumping activity, suggesting that the protein reflects the functional structure in vivo. To discern the assembling mode with TolC, the AcrBA fusion protein was incubated with TolC or a chimeric protein containing the TolC aperture tip region. Three-dimensional structures of the complex proteins were determined through transmission electron microscopy. The overall structure exemplifies the adaptor bridging model, wherein the funnel-like AcrA hexamer forms an intermeshing cogwheel interaction with the ${\alpha}$-barrel tip region of TolC, and a direct interaction between AcrB and TolC is not allowed. These observations provide a structural blueprint for understanding multidrug resistance in pathogenic Gram-negative bacteria.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.84-91
• /
• 2008

"Eco-friendly construction" is an emerging issue in the building industry. Main purpose of the eco-friendly construction is to sustain the health and environment of building residents and to minimize the harmful effect on their environment. Apartment residents have great concern on eco-product, since many cases are reported that Sick Building Syndrome is caused by toxic substance from building materials. Environmental performance is to meet through using the highest grade eco-friendly materials. However, generally eco-friendly materials are more expensive than normal materials, Therefore, using eco-friendly materials at public housing project is limited to economical aspect. The purpose of this paper is development of eco-friendly material selection model considered cost efficiency. The selection of Eco-friendly finishing materials and their methods are constructed to consider environmental performance level and cost index compositively. Development of eco-friendly material selection method is economic and reasonable one when public housing is constructed.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.953-956
• /
• 2007

"Eco-friendly construction"is an emerging issue in the building industry. Main purpose of the eco-friendly construction is to sustain the health and environment of building residents and to minimize the harmful effect on their environment. Apartment residents have great concern on eco-product, since many cases are reported that Sick Building Syndrome is caused by toxic substance from building materials. Environmental performance is to meet through using the highest grade eco-friendly materials. However, generally eco-friendly materials are more expensive than normal materials. Therefore using eco-friendly materials at public housing project is limited to economical aspect. The purpose of this paper is development of eco-friendly material selection model considered cost efficiency. The selection of Eco-friendly finishing materials and their methods are constructed to consider environmental performance level and cost index compositively. Development of eco-friendly material selection method is economic and reasonable one when public housing is constructed.