• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.138-146
• /
• 1983

With the increase of pesticide consumption, not only pesticide handling population would grow greater but also the chances to be exposed to the pesticides would be also increased. Thus, safe use and handling of the pesticides are becoming more important and serious in these days. The pesticides are well known to most pepole, however there are very limited number of persons who have correct understanding of chamicals. Intoxication cases caused by pesticides have been reported very rarely through the mess media, even they were lack of scientific evidences. In this paper, problems related to pesticide manufacture, transportation, storage, sprays, and residues and their countermeasures were discussed in connection with public health and enviromental aspects. Acute intoxication cases by pesticide handling might be caused accidently either through manufacture, marketing, transportation, or spraying. Safety aspects of workers in manufacturing plants include not only exposure to toxic chemicals, but also posibilities of of explosion and brought about by pesticides and their diluents. The problems of water pollution by waste chemicals from the manufacturing factories were discussed. Packing and loading methods of pesticides for transportation are considered in safety scheme and discussions are given in association with traffic accidents. With regard to warehouse, the pesticide storage, location structure, keepers, and standing materials for emergency are concerned with safety aspects. Concerning the spraying of chemicals, there are some problems to be discussed about clothes, spray equipment, wind direction, spray period, and spray workers condition. After the spray, treatment of used containers, remainder of Pesticides, and spray tools are also discussed. For the dissolutions of problems on public health and environmental danger arising from pesticide residues, there are two legal sanctions; 'Pesticide Tolerances' and 'Pesticide Safe Use Standards'. These regulations are legally effective, however, some problems still remain in practices to implement the acts properly, because these provisions are followed by the far mers mostly. With these regards, most problems are concerned with various sectors and persons, affecting public health and environment from the producers to the end users and consumers. As a whole persons concerned with pesticides, every possible effort has to be assembled to protect hazards from the chemicals. For the foremost place, special training and education are required for managing groups; such as factory managers and agricultural extension workers who are responsible for training the factory workers and farmers. The education is the only way to solve the hazard problems caused by the pesticides.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.231-238
• /
• 2014

BACKGROUND: Biochar (BC) has a great potential for enhancing soil fertility and carbon sequestration while facilitating beneficial waste disposition. Therefore, it is essential to assess and mitigate any inadvertent consequences associated with soil biochar amendment. Earthworm activity is very vital in the soil system, yet there are a limited number of studies that have examined their impact resulting from biochar application to soil. METHODS AND RESULTS: In this study, the survival, growth, reproductive tests, and oxidative DNA damage tests (measured by 8-hydroxydeoxyguanosine (8-OHdG) and catalase (CAT) activities) to assess the potential toxicity to earthworm Eisenia fetida in artificial soil amended with BCs were investigated. The BCs derived from perilla meal, sesame meal, and pumpkin seed were pyrolyzed at 300 and $550^{\circ}C$, and then amended with soil at a rate of 5%. All the earthworms survived, but lost weight compared to control soil after 28 day incubation period. Moreover, the BC-amended soils did not significantly affect the cocoon numbers of earthworms. Slightly higher concentrations of 8-OHdG and CAT were observed in earthworms present in BC-treated soil than those in control soil. Furthermore, the 8-OHdG concentrations in the soil amended with BC produced at $550^{\circ}C$ were greater than those at $300^{\circ}C$, and it slightly decreased as the incubation time increased. CONCLUSION: These observations could be due to higher contents of toxic metal(loid)s and also higher pH in BCs pyrolyzed at $550^{\circ}C$ than $300^{\circ}C$. While BC is efficiently being used in agricultural fields, this study suggests that it is required to assess the unintended negative impacts of BC on soil ecosystems.

• Journal of Life Science
• /
• v.26 no.5
• /
• pp.503-508
• /
• 2016

Biosensors have been used as first-step monitoring tools to detect on-site samples in a simple and cost-effective manner. Numerous recombinant microbial biosensors have been exploited for monitoring on-site toxic chemicals and biological signals. Herein, a recombinant microbial biosensor was constructed for monitoring cadmium. The cadmium responding cadC regulatory gene and it’s promoter from Staphylococcus aureus was amplified through PCR, fused with the lacZ gene, and transformed into Escherichia coli BL21 (DE3) cells. In the presence of cadmium, the biosensor cells express β-galactosidase showing red color development with chlorophenol red β-galactopyranoside (CPRG) as the enzymatic substrate. The biosensor cells showed the best β-galactosidase activity after 3 hr induction with cadmium at pH 5 and a detection range from 0.01 μM to 10 mM cadmium with a linearity from 0.01 to 0.1 μM cadmium (y = 0.98 x + 0.142, R² = 0.98). Among the heavy metals, cadmium and lead showed good responses, tin and cobalt showed medium responses, and mercury and copper showed no responses. The biosensor cells showed good responses to several waste waters similar to buffer solution, all spiked with cadmium. The biosensor described herein could be applied for on-site cadmium monitoring in a simple and cost-effective manner without sample pretreatments.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.517-532
• /
• 2010

After establishment of Banwol industrial complex in 1987, Ansan city becomes the largest industrial sector development in Gyeonggi-do, Korea. As the population and industrial activity grow over this region, toxic air pollutants, particularly POPs (Persistent Organic Pollutants) from various emission sources have been major public concerns. Air samples for POPs monitoring were collected at the industrial sites ($A_2$), residential sites ($B_1$, $B_2$), commercial site (C), and rural/remote site (D) of the area of Ansan during 2008 with a prolonged industrial sampling site $A_1$ from 2001 to 2008. All samples were analysed for 2,3,7,8 substituted-polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) and dioxin like polychlorinatd diphenyls (dl-PCBs). In site $A_1$, a steady decline of their concentrations from 2003 to 2008 was observed due to the reinforced emission guideline from waste incinerators. The average concentration of the PCDD/Fs and dl-PCBs ranged between 0.118 pg-TEQ/$m^3$ (rural/remote site D) and 0.532 pg-TEQ/$m^3$ (industrial area $A_2$). These level were generally consistent with previous studies in Gyeonggi-do, while higher than other places. Most of PCDD/Fs congener were partitioned into particle phase, whereas dl-PCBs were partitioned into gas phase. The logarithm of gas-particle partition coefficient $K_P$ of dl-PCBs and PCDD/Fs were well correlated with sub-cooled liquid vapor pressure $P_L$. The slope $m_T$ of log $K_P$ versus log $P_L$ for PCDD/Fs (-1.22) and dl-PCBs (-1.02) in industrial area ($A_2$) were high compared to other residential/commercial area. It suggests that this area was likely influenced by the direct emission source of PCDD/Fs and dl-PCBs. To simulate the partition of PCDD/Fs and dl-PCBs between gas and particle phase, Junge-Pankow model ($P_L$-base) and $K_{oa}$ model were applied. It was found that J-P model was more suitable than the $K_{oa}$ model in this study.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.358-363
• /
• 2005

A large amount of oyster-shell waste has been illegally disposed at oyster farm sites along the southern coast of Korea, which already created serious environmental problems. Therefore, the study was undertaken to increase the consumption of oyster shell meal as a soil amendment. The effects of oyster shell meal on dynamics of heavy metals and uptake of heavy metals by spring Chinese cabbage were evaluated in silt loam soil (in Gyeongsang National University, Jinju, Gyeongnam-do, Korea), where 0, 4, 8, 12 and 16 Mg $ha^{-1}$ oyster-shell meal fertilizer were added. Lime treatment (2 Mg $ha^{-1}$) was selected as a control. In the results of this study, cabbage yields were increased by increasing levels of oyster-shell meal fertilizer. With increasing levels of oyster-shell meal fertilizer, total heavy metals concentrations were not significant among treatments. However, 0.1N HCl extractable heavy metals concentration was significantly reduced due to increasing of soil pH. A lot of portion (ca. $80{\sim}90%$) heavy metals fraction of all fractions was residual phase in soil after harvesting. The contents of Cu, Mo, Zn in cabbage were slightly increased by increasing levels of oyster shell meal fertilizer. However, there were no toxic symptoms of heavy metals during cultivation. Conclusively, it was estimated that oyster shell fertilizer could be a good amendment to increase productivity of crop and reduce uptake of heavy metals by crop and mobility of heavy metals in soil.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1146-1152
• /
• 2005

Graft copolymers were synthesized from methylcellulose(MC) and acrylic acid(AA) with active carboxyl groups in the presence of potassium persulfate($K_2S_2O_8$) initiator to enhance adsorption capacity of toxic heavy metal such as $Pb^{2+}$ and $Cu^{2+}$ from wastewater. The resulting grafted copolymers(MC-g-AA/PAA) were mixture of the graft copolymers from MC and AA(MC-g-AA) and polyacrylic acid homopolymers(PAA). The degree of palling was increased with rising concentration of monomer and initiator under the reaction conditions at $60^{\circ}C$, 3 hrs. The water insoluble property of MC-g-AA showed more than 19.7% degree of grafting. So that it could be an adsorbent of heavy metals. Adsorption characteristics of the MC-g-AA were evaluated depending on the degree of grading, pH of wastewater, adsorption time, dosage of MC-g-AA and concentration of heavy metals in the different conditions. Degree of grafting, and initial concentration of heavy metal ions increased, the adsorption amount of $Pb^{2+}$ and $Cu^{2+}$ increased, but added MC-g-AA increased, the adsorption amount per unit weight of $Pb^{2+}$ and $Cu^{2+}$ decreased. The MC-g-AA showed the high $Pb^{2+}$ and $Cu^{2+}$ adsorption amount in the range pH $4{\sim}6$. Also all of $Pb^{2+}$ and $Cu^{2+}$ ions reached in adsorption equilibrium in neighborhood 4 hours. The adsorption of heavy metals described by Freundlich isotherm, it was determined the value of l/n of $Pb^{2+}$ and $Cu^{2+}$ that 0.4294 and 0.3453, respectively.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.279-288
• /
• 2014

Nuclear energy is expected to meet the growing energy demand while avoiding CO2 emission. However, the problem of accumulating spent fuel from current nuclear power plants which is mainly composed of uranium oxides should be addressed. One of the most practical solutions is to reduce the spent oxide fuel and recycle it. Next-generation fuel cycles demand innovative features such as a reduction of the environmental load, improved safety, efficient recycling of resources, and feasible economics. Pyroprocessing based on molten salt electrolysis is one of the key technologies for reducing the amount of spent nuclear fuel and destroying toxic waste products, such as the long-life fission products. The oxide reduction process based on the electrochemical reduction in a LiCl-$Li_2O$ electrolyte has been developed for the volume reduction of PWR (Pressurized Water Reactor) spent fuels and for providing metal feeds for the electrorefining process. To speed up the electrochemical reduction process, the influences of the feed form for the cathode and the type of anode shroud on the reduction rate were investigated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2017

Recently, several researches have been studied on agricultural automation system according to convergence of IT technology with agriculture. An automatic control system of the growth environment in crops is one of the these researches. The controls of damages caused by diseases and insects pest in crops are mainly carried out by manual mode or semi-automatic mode because of farmer's concerns for poor efficiency. But, this situation needs to be improved because it occurs various problems, such as human exposure to toxic pesticides, environmental pollution and waste due to drug overuse. In order to solve these problems, we developed an automatic quantity control system which based on the amount of pesticides for area under cultivation. The amount of pesticides is calculated according to the manufacturer's instruction for pesticides. To verify the effectiveness of our developed automatic system, we also compared with the systems of manual mode and the semi-automatic mode. The experimental results of a pest control performance of an automatic quantity control system showed that automatic system can reduce overuse of drugs. These results suggested that it can be expected to replace the existing system, with equivalent effectiveness to the manual mode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.218-225
• /
• 2020

This study analyzed the priorities of the cross-compliance items of public-benefit direct payment using an Analytic Hierarchy Process and Fuzzy Decision Making Analysis. The valuation criteria are policy efficiency, farm acceptability, and feasibility, and the valuation targets are the basic and additional cross-compliance items. The survey was performed by targeting 50 experts from each class, and conducted for about a month starting from the beginning of July 2019. The results show that the weight of the valuation criteria is higher in the order of farm acceptability, feasibility, and policy efficiency. Compliance with PLS standards, compliance with disposal standards of waste vinyl and pesticides, soil testing, compliance with toxic substance standards, education, etc. are comparatively evaluated to be higher cross-compliance items in basic cross-compliance. Disposing of an abandoned well, jointly collecting and disposing of agricultural by-products, common area care and cleaning, maintenance of empty houses and poor facilities, growing green manure crops during the fallow period, etc. are comparatively evaluated to be higher cross-compliance items for the additional cross-compliance. The results of this study are expected to contribute to the government's policy related to the cross-compliance of public-benefit direct payment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.4
• /
• pp.293-299
• /
• 1987

At various times and places all over the world men have become ill and some have died after eating shellfish that were intoxicated with paralytic shellfish poison(PSP) caused by Protogonyaulax spp. In late March, 1986, two persons were dead by ingesting wild sea mussels, Mytilur edulis, grown at bottom of an anchored waste ship to be dismantled at Gamchun Bay, Pusan, Korea. The samples were collected from the bottom of the ship during April $1\~April$ 8 of the year to find the cause of the food poisoning accident. The toxicity was estimated by bioassay with ICR male mouse, while the toxins were extracted and characterized. The toxins were extracted with acidified $80\%$ ethanol. The extract was defatted three times with dichloromethane, treated with activated charcoal, and then purified by chromatography on Bio-Gel P-2 and Bio-Rex 70. The toxic fractions obtained were analysed by cellulose acetate membrane electrophoresis, thin layer chromatography and high performance liquid chromatogaphy. The range and the average of PSP-toxicity of the samples were $132\~295\;MU/g$, 203 MU/g respectively. The amount of PSP was $26.4\~58.9{\mu}g/g$ of whole meat in range and $40.6{\mu}g/g$ in average. The toxicity of the digestive gland of the samples was 9 times higher than that of edible meat (except digestive gland) as $439\~979MU/g$, and it was about $70\%$ in total toxin. The compositional analytical results of the paralytic shellfish toxin, Gonyautoxin $1\~4$ were the major part of the PSP and Saxitoxin and neosaxitoxin were detected as the minor component. It was concluded that the food poisoning accident was caused not by Saxitoxins but by Gonyautoxins.