• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.69-77
• /
• 2011

Ethylene glycol (EG) is produced commercially in large amounts and is widely used as antifreeze or deicing solution for cars, boats, and aircraft. EG poisoning occurs in suicide attempts and infrequently, either intentionally through misuse or accidental as EG has a sweet taste. EG has in itself a low toxicity, but is in vivo broken down to higher toxic organic acids which are responsible for extensive cellular damage in various tissues caused principally by the metabolites glycolic acid and oxalic acid. The most conclusive analytical method of diagnosing EG poisoning is determination of EG concentration. However, victims are sometimes admitted at a late stage to hospitals or died during emergency treatment like a gastric lavage or found rotten dead, when blood EG concentrations are low or not detected. Therefore, in this study, the identification of EG was not only performed by gas chromatograpyc-mass spectrometry (GC-MS) following derivatization but also further toxicological analyses of metabolites, glycolic acid (GA) and oxalic acid (OA), were performed by ion chromatography in various biological specimens. A ranges of blood concentrations (3 cases) was $10\sim2,400\;{\mu}g/mL$ for EG, $224\sim1,164\;{\mu}g/mL$ for GA and ND $\sim40\;{\mu}g/mL$ for OA, respectively, In other biological specimens (liver, kidney, bile and pleural fluid), a range of concentrations (3 cases) was ND $\sim55,000\;{\mu}g/mL$ for EG, ND $\sim1,124\;{\mu}g/mL$ for GA and ND $\sim60\;{\mu}g/mL$ for OA, respectively. Liver and kidney tissues were recommended specimens including blood because OA, a final metabolite of EG, was identified large amounts in these despite no detectable EG caused by some therapy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.18-24
• /
• 2018

The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for about 95% of the automobiles in use. Also, in order to meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is gradually increasing. Natural gas is a clean fuel that emits few air pollutants and has been used mainly as a fuel for city buses. In the long term, we intend to develop a new NGOC/LNT+NGCO/SCR combined system that simultaneously reduces the toxic gases, $CH_4$ and NOx, emitted from CNG buses. The objective of this study is to investigate the characteristics of $de-CH_4/NOx$ according to the ceramic and metal substrates of the SCR (Selective Catalytic Reduction) catalysts mounted downstream of the combined system. The V and Cu-SCR catalysts did not affect the $CH_4$ oxidation reaction, the two NGOC/SCR catalysts each coated with two layers began to oxidize $CH_4$ at $400^{\circ}C$, and the amount of $CH_4$ emitted was reduced to about 20% of its initial value at about $550^{\circ}C$. The two NGOC/SCR catalysts each coated with two layers showed a negative (-) NOx conversion rate above $350^{\circ}C$. The ceramic-based combined system reached LOT50 at $500^{\circ}C$, which was about 20% higher in terms of the $CH_4$ conversion rate than the metal-based combined system, showing that the combined system of NGOC/LNT+Cu-SCR is a suitable combination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.708-715
• /
• 2017

Recently, in order to meet the stricter emission regulations, the proportion of after-treatments for vehicles and vessels has been increasing gradually. The objective of this study is to investigate the improvement of $CH_4$ reduction ability of natural gas oxidation catalyst (NGOC), which reduces toxic gases emitted from CNG buses. Thirteen NGOCs were prepared, and the conversion performance of noxious gases according to the type of supports, the loading amount of noble metal, and surfactant and aging were determined. Support Zeolite supported on No. 3 $NGOC(1Pt-1Pd-3MgO-3CeO_2/(46TiO_2+23Al_2O_3+23Zeolite)$ is an anionic alkali metal/earth metal component that improved the oxidation reactivity between CO and NO and noble metal dispersion, and thus enhanced the $CH_4$ reduction ability. As the loading amount of Pd, a noble metal with a high selectivity to $CH_4$, was increased, the number of reaction sites was increased and the ability to reduce $CH_4$ was improved. No. 11 $NGOC(1Pt-1Pd-3MgO-3CeO_2/(Z20+Al80)$(pH=8.5), to which nitrate surfactant had been added, exhibited well dispersed catalyst particles with no agglomeration and improved the $CH_4$ reduction ability by 5-15%. The $NGOC(2Pt-2Pd-3Cr-3MgO/90Al_2O_3)$(48h aging), which was mildly thermal aged for 48h, increased the $CH_4$ reduction ability to about 10% or less as compared with No. 12 NGOC(Fresh).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.15-29
• /
• 2005

Truck Shipment Safety Information, which is a part of the development of NERIS is divided into Optimal Route Guidance System and Emergency Response System. This research is for establishing an advance warning system, which aims for preventing damages(fire, explosion, gas-escape etc.) and detecting incidents that are able to happen during transporting hazardous materials in advance through monitoring the position of moving vehicles and the state of hazardous materials in real-time. This research is peformed to confirm the practical possibility of application of the advance warning system that monitors whether the hazardous materials transport vehicles move the allowed routes, finds the time and the location of incidents of the vehicles promptly and develops the emergency system that is able to respond to the incidents as well by using the technologies of CPS, CDMA and CIS with testing the ability of performance. As the results of the test, communication accuracies are 99$\%$ in freeway, 96$\%$ in arterial, 97$\%$ in hilly sections, 99$\%$ in normal sections, 96$\%$ in local sections, 99$\%$ in urban sections and 98$\%$ in tunnels. According to those results, the system has been recorded a high success rate of communication that enough to apply to the real site. However, the weak point appeared through the testing is that the system has a limitation of communication that is caused in the rural areas and certain areas where are fewer antennas that make communication possible between on-board unit and management server. Consequently, for the practical use of this system, it is essential to develop the exclusive en-board unit for the vehicles and find the method that supplements the receiving limitation of the GPS coordinates inside tunnels. Additionally, this system can be used to regulate illegal acts automatically such as illegal negligence of hazardous materials. And the system can be applied to the study about an application scheme as a guideline for transporting hazardous materials because there is no certain management system and act of toxic substances in Korea.

• Journal of Chest Surgery
• /
• v.34 no.7
• /
• pp.524-533
• /
• 2001

Background: Hyperoxemic cardiopulmonary bypass (CPB) has been recognized as a safe technique and is widely used in cardiac surgery. However, hyperoxemic CPB may produce higher toxic oxygen species and cause more severe oxidative stress and ischemia/reperfusion injury than normoxemic CPB. This study was undertaken to compare inflammatory responses and myocardial injury between normoxemic and hyperoxemic CPB and to examine the beneficial effect of normoxemic CPB. Material and method: Thirty adult patients scheduled for elective cardiac surgery were randomly divided into normoxic group (n=15), who received normoxemic CPB (about Pa $O_{2}$ 120 mmHg), and hyperoxic group (n=15), who received hyperoxemic CPB (about Pa $O_{2}$ 400 mmHg). Myeloperoxidase (MPO), malondialdehyde (MDA), adenosine monophosphate (AMP), and troponin-T (TnT) concentrations in coronary sinus blood were determined at pre- and post-CPB. Total leukocyte and neutrophil counts in arterial blood were measured at the before, during, and after CPB. Lactate concentration in mixed venous blood was analyzed during CPB, and cardiac index (Cl) and pulmonary vascular

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.215-224
• /
• 2017

Arsenic (As) is known to be the most toxic element and frequently detected in groundwater environment. Inorganic As exists as arsenite [As(III)] and arsenate [As(V)] in reduced and oxidized environments, respectively. It has been reported that the toxicity of arsenite is much higher than that of arsenate and furthermore arsenite shows relatively higher mobility in aqueous environments. For this reason, there have been numerous researches on the process for oxidation of arsenite to arsenate to reduce the toxicity of arsenic. In particular, photooxidation has been considered to be simple, economical, and efficient to attain such goal. This study was conducted to evaluate the applicability of naturally-occurring goethite as a photocatalyst to substitute for $TiO_2$ which has been mostly used in the photooxidation processes so far. In addition, the effects of several factors on the overall performance of arsenite photocatalytic oxidation process were evaluated. The results show that the efficiency of the process was affected by total concentration of dissolved cations rather than by the kind of those cations and also the relatively higher pH conditions seemed to be more favorable to the process. In the case of coexistence of arsenite and arsenate, the removal tendency by adsorption onto goethite appeared to be different between arsenite and arsenate due to their different affinities with goethite, but any effect on the photocatalytic oxidation of arsenite was not observed. In terms of effect of humic acid on the process, it is likely that the higher concentration of humic acid reduced the overall performance of the arsenite photocatalytic oxidation as a result of competing interaction of activated oxygen species, such as hydroxyl and superoxide radicals, with arsenite and humic acid. In addition, it is revealed that the injection of oxygen gas improved the process because oxygen contributes to arsenite oxidation as an electron acceptor. Based on the results of the study, consequently, the photocatalytic oxidation of aqueous arsenite using goethite seems to be greatly feasible with the optimization of process.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.333-344
• /
• 2022

The quarrying and utilization of natural building stones such as granite and marble are rapidly emerging in developing countries. A huge amount of wastes is being generated during the processing, cutting and sizing of these stones to make them useable. These wastes are disposed of in the open environment and the toxic nature of these wastes negatively affects the environment and human health. The growth trend in the world stone industry was confirmed in output for 2019, increasing more than one percent and reaching a new peak of some 155 million tons, excluding quarry discards. Per-capita stone use rose to 268 square meters per thousand persons (m²/1,000 inh), from 266 the previous year and 177 in 2001. However, we have to take into consideration that the world's gross quarrying production was about 316 million tons (100%) in 2019; about 53% of that amount, however, is regarded as quarrying waste. With regards to the stone processing stage, we have noticed that the world production has reached 91.15 million tons (29%), and consequently this means that 63.35 million tons of stone-processing scraps is produced. Therefore, we can say that, on a global level, if the quantity of material extracted in the quarry is 100%, the total percentage of waste is about 71%. This raises a substantial problem from the environmental, economical and social point of view. There are essentially three ways of dealing with inorganic waste, namely, reuse, recycling, or disposal in landfills. Reuse and recycling are the preferred waste management methods that consider environmental sustainability and the opportunity to generate important economic returns. Although there are many possible applications for stone waste, they can be summarized into three main general applications, namely, fillers for binders, ceramic formulations, and environmental applications. The use of residual sludge for substrate production seems to be highly promising: the substrate can be used for quarry rehabilitation and in the rehabilitation of industrial sites. This new product (artificial soil) could be included in the list of the materials to use in addition to topsoil for civil works, railway embankments roundabouts and stone sludge wastes could be used for the neutralization of acidic soil to increase the yield. Stone waste is also possible to find several examples of studies for the recovery of mineral residues, including the extraction of metallic elements, and mineral components, the production of construction raw materials, power generation, building materials, and gas and water treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1968

This study aimed at contributing to the improvement of cropping systems after finding out the effects of excrements and components of crop root influence on other crops as well as themselves. The following forage crops suitable for our country were selected for the present study. Aqueous extracts of fresh roots, aqueous extracts of rotting roots and aqueous solutions of excrements of red clover, orchard grass and brome grass were studied for the effects influencing the germination and growth of seedlings of red clover, ladino clover, lespedeza, soybean, orchard grass, Italian ryegrass, brome grass, barley, wheat, sorghum, corn and Hog-millet. In view of the possibility that the organic acid might be closely related to the excrements and components of crop root connected with soil sickness, the acid components of three species of roots were analysed by paper chromatography and gas chromatography method. The following results were obtained: 1. Effects of Aqueous Extracts of Fresh Roots : Aqueous extracts of red clover: The extracts inhibited the growth of seedlings of the ladino clover and lespedeza and also inhibited the development of most crops except that of sorghum among the Graminaceae. Aqueous extracts of orchard grass: The extracts promoted the seedlings growth of red clover and soybean, while it inhibited the germination and growth of orchard grass. There were no noticeable effects influencing other crops while it inhibited the growth of barley and Hog-millet. Aqueous extracts of brome grass: There was no effect on Italian ryegrass but there was an inhibiting effect on the other crops. 2. Effects of Aqueous Extracts of Rotting Roots : Aqueous extracts of red clover: The extracts promoted the seedling growth of red clover. But it reflected the inhibiting effects on other crops except sorghum. Aqueous extracts of orchard grass: The extracts promoted the growth of red clover, ladino clover, soybean and sorghun, while it inhibited the germination and rooting of barley and Hog-millet. Aqueous extracts of brome grass: The extracts gave the promotive effects to the growth of red clover, soybean and sorghum, but caused inhibiting effects on orchard grass, brome grass, barley and Hog-millet. 3. Effects of Aqueous Solutions of Excrements : The aqueous solution of excrements of red clover reflected the inhibition effects to the growth of Graminaceae, while the aqueous solutions of excrements of orchard grass and Italian ryegrass caused the promotive effects on the growth of red clover. 4. Results of Organic Acid Analysis : The oxalic acid, citric acid, tartaric acid, malonic acid, malic acid and succinic acid were included in the roots of red clover as unvolatile organic acid, and in the orchard grass and brome grass there were included the oxalic acid, citric acid, tartaric acid and malic acid. And formic acid was confirmed in the red clover, orchard grass and brome grass as volatile organic acid. In consideration of the results mentioned in above the effects of excrements and components of roots found in this studies may be summarized as follows. 1) The red clover generally gave a disadvantageous effect on the Graminaceae. Such trend was considered chiefly caused by the presence of many organic acids, namely oxalic, citric, tartaric, malonic, malic, succinic and formic acid. 2) The orchard grass generally gave an advantageous effect on the Leguminosae. This may be due to a few kinds of organic acid contained in the root, namely oxalic, citric, tartaric, malic and formic acid. Furthermore a certain of promotive materials for growth was noted. 3) As long as the root of brome grass are not rotten, it gave a disadvantageous effect on the Leguminosae and Graminaceae. This may be due to the fact that several unidentified volatile organic acid were also included besides the confirmed organic acid, namely oxalic, citric, tartaric, malic and formic acid. 5. Effects of Components in Roots to the Soil Sickness : 1) It was considered that the cause of alleged red clover's soil sickness did not result from the toxic components of the roots. 2) It was recognized that the toxic components of roots might be the cause of soil sickness in case the orchard grass and brome grass were put into the long-term single cropping. 6. Effects of Rooted Components to the Companion Crops in the Cropping System : a) In case of aqueous extracts of fresh roots and aqueous excrements (Inter cropping and mixed cropping) : 1) Advantageous combinations : Orchard grass->Red clover, Soybean, Italian ryegrass->Red clover, 2) Disadvantageous combinations : Red clover->Ladino clover, Lespedeza, Orchard grass, Italian ryegrass, Fescue Ky-31, Brome grass, Barley, Wheat, Corn and Hog.millet, Orchard grass->Lespedeza, Orchard grass, Barley and Hog-millet, Brome grass->Red clover, Ladino clover, Lespedeza, Soybean, Orchard grass, Brome grass, Barley, Wheat, Sorghum, Corn and Hog-millet, 3) Harmless combinations : Red clover->Red clover, Soybean and Sorghum, Orchard grass->Ladino clover, Italian ryegrass, Brome grass, Wheat, Sorghum and Corn, Brome grass->Italian ryegrass, b) In case of aquecus extracts of rotting roots(After cropping) : 1) Advantageous combinations : Red clover->Red clover and Sorghum, Orchard grass->Red clover, Ladino clover, Soybean, Sorghum, and Corn, Brome grass->Red clover, Soybean and Sorghum, 2) Disadvantageous combinations : Red clover->Lespedeza, Orchard grass, Italian ryegrass, Brome grass, Barley, Wheat, and Hog-millet Orchard grass->Barley and Hog-millet, Brome grass->Orchard grass, Brome grass, Barley and Hog-millet, 3) Harmless combinations : Red clover->Ladino clover, Soybean and Corn, Orchard grass->Lespedeza, Orchard grass, Italian ryegrass, Brome grass and Wheat Brome gass->Ladino clover, Lespedeza, Italian ryegrass and Wheat.

• Korean Journal of Soil Science and Fertilizer
• /
• v.2 no.1
• /
• pp.53-68
• /
• 1969

The nutriophysiological response of rice plant to root environment was investigated with eye observation of root development and rhizosphere in situation. The results may be summarized as follows: 1) The quick decomposition of organic matter, added in low yield soil, caused that the origainal organic matter content was reached very quickly, in spite of it low value. In high yield soil the reverse was seen. 2) In low yield soil root development, root activity and T/R value were very low, whereas addition of organic matter lowered them still wore. This might be contributed to gas bubbles around the root by the decomposition of organic matter. 3) Varietal difference in the response to root environment was clear. Suwon 82 was more susceptible to growth-inhibitine conditions on low-yield soil than Norin 25. 4) Potassium uptake was mostly hindered by organic matter, while some factors in soil hindered mostly posphorus uptake. When the organic matter was added to such soil, the effect of them resulted in multiple interaction. 5) The root activity showed a correlation coeffieient of 0.839, 0.834 and 0.948 at 1% level with the number of root, yield of aerial part and root yield, respectively. At 5% level the root-activity showed correlation-coefficient of 0.751, 0.670 and 0.769 with the uptake of the aerial part of respectively. N, P and K and a correlation-coefficient of 0.729, 0.742 and 0.815 with the uptake of the root of respectively N.P. and K. So especially for K-uptake a high correlation with the root-activity was found. 6) The nitrogen content of the roots in low-yield soil was higher than in high-yield soil, while the content in the upper part showed the reverse. It may suggest ammonium toxicity in the root. In low-yield soil Potassium and Phosphorus content was low in both the root and aerial part, and in the latter particularly in the culm and leaf sheath. 7) The content of reducing sugar, non-recuding sugar, starh and eugar, total carbohydrates in the aerial part of plants in low yield soil was higher than in high yield soil. The content of them, especially of reducing sugar in the roots was lower. It may be caused by abnormal metabolic consumption of sugar in the root. 8) Sulfur content was very high in the aerial part, especially in leaf blade of plants on low yield soil and $P_2O_5/S$ value of the leaf blade was one fifth of that in high yield soil. It suggests a possible toxic effect of sulfate ion on photophosphorization. 9) The high value of $Fe/P_2O_5$ of the aerial part of plants in low yield soil suggests the possible formation of solid $Fe/PO_4$ as a mechanical hindrance for the translocation of nutrients. 10) Translocation of nutrients in the plant was very poor and most nutrients were accumulated in the root in low yield soil. That might contributed to the lack of energy sources and mechanical hindrance. 11) The amount of roots in high yield soil, was greater than that in low yield soil. The in high-yield soil was deep, distribution of the roots whereas in the low-yield soil the root-distribution was mainly in the top-layer. Without application of Nitrogen fertilizer the roots were mainly distributed in the upper 7cm. of topsoil. With 120 kg N/ha. root were more concentrated in the layer between 7cm. and 14cm. depth. The amount of roots increased with the amount of fertilizer applied.