• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.3
• /
• pp.151-156
• /
• 2009

This study shows that the distribution density of snow crab, Chionoecetes opilio, was estimated using an underwater video monitoring system attached on the towing sledge. The field experiments were carried out at the coastal waters around Chuksan, East Sea, where ranged from 110 to 130m depth during September and October 2007. The sledge was towed for 40 minutes and the towing speed was controlled between 1.5 to 1.7 knot and each research areas were calculated to multiply towed distance by the detection width of the video monitoring system(1.2m), and then, distribution density of snow crab in each observations were estimated as a counted number of crab per 1,000$m^2$. The result shows that their survey, taken between two months, reflected similar results during survey period, and the maximum and mean distribution densities in September estimated to be 77.0(number/1,000$m^2$) and 19.9, respectively, and those of October were 36.0 and 21.8, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.303-307
• /
• 2008

The tug boat is restricted in her maneuvering ability due to the towed barge, and tug-barge has been strongly affected by the external forces, i.e. the wind, wave, currents, and so on. Therefore, it is difficult to get the safety of tug-barge operation. It is necessary for the captain of tug boat, VTS and operation department to develope the system which can keep observing the course, speed and position of the towed barge in actual sea and prevent the marine accidents in advance. In this study, we proposed the basic method to develope the safety towing system for barge using portable GPS which was easily movable and relatively inexpensive. Then we conducted the test on the real barge. As a result, we could obtain diverse navigation data to make a safety towing work. It was noted that these data could be used for carious purposes.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.3
• /
• pp.113-122
• /
• 2000

본 논문에서는 손상선박의 안전대책에 관한 연구의 일환으로서, 황천항행중인 선박이 충돌, 좌초 등 원인에 의해 조종불능이 되었을 때를 가상하고, 예선ㆍ피예선계의 침로안정성에 미치는 풍향, 풍속, 예항삭의 길이의 영향을 이론적으로 검토하고, 풍압하에서 피예선을 다른 안전한 장소로의 예항에 대하여 하나의 지침을 주는 것을 목적으로 한다. 여기에서 실선은 Hulk carrier와 Passenger liner를 모델로 삼았고 외력으로서는 파도가 충분히 발달되지 않은 바람이 부는 초기상태 혹은 저속으로 항행하는 상태를 고려하여 바람의 영향만을 취급하며 피예선은 조타를 하지 아니한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.151-154
• /
• 1998

이 논문에서 비선형 배열 MUSIC 빔형성 기법을 이용하여 예인형 선배열 센서 시스템의 표적 좌우 방위 분리 방법을 기술하였다. 이 기법은 배열 운동모델 Water-Pully 모델과 방향센서의 정보를 이용하는 칼만필터를 설계하여 예인함 기동에 따른 배열형상을 추정하고 표적의 좌우방위를 분리하기 위하여 추정된 배열형상에서 MUSIC 빔형성 기법으로 신호처리를 수행하였다. 또한 예인주기와 예인진폭과 같은 예인함 기동형태의 전형적인 빔형성 기법과 MUSIC 빔형성 기법으로 표적의 좌우 방위 분리 성능을 비교 분석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1603-1609
• /
• 2010

This Paper deals with a design, making a prtotype and test methods of Real-time towed Line Array Sensor Data processing board for fast data communication and long range data transmission with SFM(Serial FPDP Module) through Optic-fiber channel. Towed line array sensors are installed in Frigate and the each LAS A, B, C group data from LAS is packed a previously agreed protocol and transmitted to the signal processing unit. Considering the limited space of VME 6U size, LAS Data processing board is designed with MPC8265 PowerPC Controller of Freescale for main system control and Altera's CycloneIII FPGA for sensor data packing, self-test simulation data generation, S/W FIFO et cetera. LAS Data processing board have VxWorks, the RTOS(Real Time Operating System) that present many device drivers, peripheral control libraries on board for real-time data processing.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.311-320
• /
• 2014

Test uncertainty of a towed underwater Stereoscopic Particle Image Velocimetry (SPIV) system was assessed in a towing tank. To estimate the systematic error and random error of mean velocity and turbulence properties measurement, velocity field of uniform flow was measured. Total uncertainty of the axial component of mean velocity was 1.45% of the uniform flow speed and total uncertainty of turbulence properties was 3.03%. Besides, variation of particle displacement was applied to identify the change of error distribution. In results for variation of particle displacement, the error rapidly increases with particle movement under one pixel. In addition, a nominal wake of a model ship was measured and compared with existing experimental data by five-hole Pitot tubes, Pitot-static tube, and hot wire anemometer. For mean velocity, small local vortex was identified with high spatial resolution of SPIV, but has serious disagreement in local maxima of turbulence properties due to limited sampling rate.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.203-209
• /
• 2003

In this study, the configuration and tension of a towing cable for side-scan sonar are predicted in an ambient flow and at an unsteady towing condition. The governing equation of three-dimensional dynamic analysis for a flexible cable is solved using a finite difference method. We successfully predict the configuration and tension of a side-scan sonar and designed the towing system. It is found in static analyses that the side-scan sonar must be towed to keep a its stable depth at a reasonable speed. The study also reveals in the transient analyses that the dominant component affecting the top tension is the tangential drag force for the larger towing speed than the critical speed, and the soft weight of a towed instrument for the smaller towing speed than. It should be maneuvered for a towing vessel with good consideration for the impact effect in a cable due to tension peak when a towing speed is suddenly increase. The developed program can be applicable for three-dimensional dynamic analysis of a towing system for various marine survey instruments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.371-374
• /
• 2009

This Paper deal with a design, making a prtotype and test methods of Real-time towed Line Array Sensor Data processing board for fast data communication and long range transmission with SFM(Serial FPDP Module) through Optic-fiber channel. The LAS A,B,C group Data from towed line array sensor which is installed in FFX(Fast Frigate eXperimental) of Korean Navy is packed a previously agreed protocol and transmitted to the Signal processing unit. Consider the limited space of VME 6U size, LAS Data processing board is designed with MPC8265 PowerPC Controller of Freescale for main system control and Altera's CycloneIII FPGA for sensor data packing, self-test simulation data generation, S/W FIFO et cetera. LAS Data processing board have VxWorks, the RTOS(Real Time Operating System) that present many device drivers, peripheral control libraries on board for real-time data processing.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.52-59
• /
• 2008

We have developed a new deep-towed marine DC resistivity survey system. It was designed to detect the top boundary of the methane hydrate zone, which is not imaged well by seismic reflection surveys. Our system, with a transmitter and a 160-m-long tail with eight source electrodes and a receiver dipole, is towed from a research vessel near the seafloor. Numerical calculations show that our marine DC resistivity survey system can effectively image the top surface of the methane hydrate layer. A survey was carried out off Joetsu, in the Japan Sea, where outcrops of methane hydrate are observed. We successfully obtained DC resistivity data along a profile ${\sim}3.5\;km$ long, and detected relatively high apparent resistivity values. Particularly in areas with methane hydrate exposure, anomalously high apparent resistivity was observed, and we interpret these high apparent resistivities to be due to the methane hydrate zone below the seafloor. Marine DC resistivity surveys will be a new tool to image sub-seafloor structures within methane hydrate zones.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.