• 공업화학
• /
• 제10권5호
• /
• pp.639-643
• /
• 1999

동시중합방법으로 에폭시수지와 castor oil형 폴리우레탄수지로 상호침투고분자(IPNs)를 형성하였다. 사슬연장제인 1,4-butanediol (BD)가 가교제인 BD/trimethylolpropane(TMP)에 따라 두 종류의 폴리우레탄(PU)을 제조했다. PU가 증가함에 따라, BD를 사슬연장제로 사용한 PU/epoxy가 BD/TMP를 가교제로 사용한 PU/epoxy SINs보다 damping피크의 이동이 컸다. BDPU/epoxy SINs는 BD/TMP-PU/epoxy SINs에 비해 사용성이 좋았다. 이러한 두 구조에서, 사슬연장제와 가교제에 따라 PU/epoxy SINs의 특이한 netwok 형성이 상혼합의 정도를 변화시켰음을 가정하였다. PU의 사슬연장제의 종류가 IPNs의 상혼합을 결정하는 중요한 인자였다. BD/TMP-PU의 반응이 에폭시수지의 가교반응보다 빠를 때, 가교구조의 entanglement가 감소하여 상혼합정도가 감소하였다. 두 PU/epoxy SINs는 굴곡특성과 파괴인성이 증가하였다. BDPU/epoxy SINs와 BD/TMP-PU/epoxy SINs의 파괴단면에서 PU의 공동화에 의한 응력백화현상과 전단변형을 보였다.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.625-630
• /
• 2013

In this study, intermediate-mixed powders were prepared by loading zirconia powders initially in a ball-mill jar and loading alumina powders afterward; the initial-mixed powders were produced by loading zirconia and alumina powders together in the ball-mill jar. The effect of such differences in mixing method on the mechanical properties was investigated. In intermediate-mixed powders, the volume fraction of large particles slightly increased and, simultaneously, zirconia particles formed agglomerates that, due to early ball-mill loading of the zirconia powders only, were more dispersed than were the initial-mixed powders. For the intermediate-mixed powders, zirconia agglomerates were destroyed more quickly than were initial-mixed powders, so the number of dispersed zirconia particles rose and the inhibitory effect of densification due to the addition of a second phase was more obvious. In the microstructure of intermediate-mixed powders, zirconia grains were homogeneously dispersed and grain growth by coalescence was found to occur with increasing sintering temperature. For the initial-mixed powders, large zirconia grains formed by localized early-densification on the inside contacts of some zirconia agglomerates were observed in the early stages of sintering. The intermediate-mixed powders had slightly lower hardness values as a whole but higher fracture toughness compared to that of the initial-mixed powders.

• 한국세라믹학회지
• /
• 제38권10호
• /
• pp.936-941
• /
• 2001

5.31 mol% ${Y_2}{O_3}$-4.45 mo1% ${Nb_2}{O_5}$-90.31 mo1% $ZrO_2$에 ${Al_2}{O_3}$를 첨가한 복합체를 제조하여 알루미나 입도가 복합체의 균열 전파 저항성에 미치는 영향을 조사하였다. $ZrO_2/{Al_2}{O_3}$ 복합체에서는 R-cuve 거동이 관찰되었으며 0.2, $2.8{\mu}m$ ${Al_2}{O_3}$가 20 vol%가 첨가된 복합체의 인성값은 각각 7.9, $8.8MPam^{1/2}$이었다. 파괴인성값의 차이는 ${Al_2}{O_3}$ 입도 크기에 의존하는 $ZrO_2/{Al_2}{O_3}$ 복합체 내의 정방정 $ZrO_2$의 결정립 크기 차이에 의한 것으로 추정된다.

• 폴리머
• /
• 제38권5호
• /
• pp.613-619
• /
• 2014

The polypropylene/polyamide elastomer (PP/PAE) blends were prepared by melt mixing. PP and PAE in PP/ PAE were immiscible completely. The size of PAE domains was large and the clear gap in the interface between PP and PAE existed, which did not meet the conditions enhancing toughness of polymers by elastomer. Therefore, maleic anhydride grafted polypropylene (MP) was used to improve the miscibility between PP and PAE. The miscibility between PP and PAE was improved and the size of dispersed phase PAE decreased by introducing MP. The crystallization of PP became easier by introducing PAE as a nucleating agent. With the increase of PAE content, the melt-crystallization temperatures of PP components in PP/PAE/MP blends increased gradually. The melt-crystallization of the polytetramethylene oxide segment of PAE component in PP/PAE blends were hampered by PP component. In addition, PAE can enhance significantly the toughness of PP, and the tensile strength and modulus did not decrease.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.399-406
• /
• 1994

The SiC/MoSi2 composite material was prepared by infiltration with the mixture of metal Si and MoSi2 into the preform of $\alpha$-SiC and graphite under the vacuum atmosphere of 10-1 torr. The mechanical properties, phases and microstructural characteristics have been investigated by employing an universal testing machine, scanning electron microscope and X-ray diffractometer. With the increase of MoSi2/Si mixing content, the quantity of the residual silicon phase was decreased and the hardness and fracture toughness of composite materials were increased. Also, as the infiltration temperature increased, a lot of fine-grained $\beta$-SiC phases, which were produced from the reaction of graphite and liquid silicon melt, were transformed to $\alpha$-SiC phases.

• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.34-40
• /
• 2022

Recently, high-entropy carbides have attracted considerable attention owing to their excellent physical and chemical properties such as high hardness, fracture toughness, and conductivity. However, as an emerging class of novel materials, the synthesis methods, performance, and applications of high-entropy carbides have ample scope for further development. In this study, equiatomic (Hf-Ti-Ta-Zr-Nb)C high-entropy carbide powders have been prepared by an ultrahigh-energy ball-milling (UHEBM) process with different milling times (1, 5, 15, 30, and 60 min). Further, their refinement behavior and high-entropy synthesis potential have been investigated. With an increase in the milling time, the particle size rapidly reduces (under sub-micrometer size) and homogeneous mixing of the prepared powder is observed. The distortions in the crystal lattice, which occur as a result of the refinement process and the multicomponent effect, are found to improve the sintering, thereby notably enhancing the formation of a single-phase solid solution (high-entropy). Herein, we present a procedure for the bulk synthesis of highly pure, dense, and uniform FCC single-phase (Fm3m crystal structure) (Hf-Ti-Ta-Zr-Nb)C high-entropy carbide using a milling time of 60 min and a sintering temperature of 1,600℃.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.97-104
• /
• 2019

Emulsion styrene-butadiene rubber silica wet masterbatch (ESBR silica WMB) technology was studied to develop highly filled and highly dispersed silica compounds, involving the preparation of a composite by co-coagulating the modified silica and the rubber latex in a liquid phase. Previous studies have shown that when manufacturing ESBR silica WMB/Butadiene silica dry masterbatch (BR silica DMB) blend compounds, preparing BR silica dry masterbatch and mixing it with ESBR silica WMB gave excellent results. However, WMB still has the problem of lower crosslink density due to residual surfactants. Therefore, in this study, tetrabenzylthiuram disulfide (TBzTD) was added instead of diphenyl guanidine (DPG) in the ESBR silica WMB/BR silica DMB blend compounds and sulfur/CBS contents were increased to evaluate their cure characteristics, crosslink densities, mechanical properties, and dynamic viscoelastic properties. TBzTD was found to be more effective in increasing the crosslink density and to produce superior properties compared to DPG. In addition, with increasing sulfur/CBS contents, mechanical properties and rolling resistance were enhanced due to high crosslink density, but the abrasion resistance was not significantly changed because of the toughness.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.21-26
• /
• 2018

녹말에 가소제인 글리세롤을 혼합하여 열가소성 녹말 (thermoplastic starch, TPS)을 제조하였다. 혼합된 글리세롤은 20-35 wt.%의 비율이었고 TPS는 이축 압출기에서 제조하였다. 제조된 TPS의 전단 점도, 열적 성질 및 기계적 강도를 시험하였다. 제조된 TPS는 전단 속도가 증가할수록 점도가 감소하는 전형적인 고분자의 점도 거동을 보였다. 가소제인 글리세롤의 함량이 증가할수록 power index, n은 증가하여 1에 가까운 값을 보였다. 이는 뉴톤성 유체인 글리세롤의 함량이 증가할수록 제조된 TPS의 점도 거동이 뉴톤성 유체에 가까워지기 때문이다. TPS의 열적 거동을 관찰한 결과 녹말과 글리세롤이 한 상(single phase)을 보임을 확인 할 수 있었다. 또한 TPS를 상온에 하루 이상 방치하면 부분적 상용성을 보이는 것으로 관찰되었는데 이는 공기 중의 습기의 작용인 것으로 추정된다. TPS의 기계적인 성질은 가소제의 함량에 크게 의존하는 것을 볼 수 있었는데 가소제의 함량이 증가할수록 인성과 강성 모두 증가하는 것을 관찰하였다. 가소제의 함량이 증가할수록 강성이 증가하는 특이한 현상은 습도와 높은 아밀로즈 함량이 복합적으로 작용하여 생긴 결과임을 DSC 분석을 통해 알 수 있었다.