• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.131-140
• /
• 2011

The purpose of this study was to evaluate the kinematic characteristics of 5th hurdle clearance during the 100m hurdle final competition at the 2010 Colorful DaeGu pre-championship meeting. This study was also intended to provide the technical data for better performance for preparing the 2011 world championship. Lee and Jung need to change technical movement by reducing the distance of the take-off point from the hurdle and by decreasing the vertical velocity of the C.G.(center of gravity) at the takeoff. Powell's angle of the take-off leg showed bigger at the touchdown and smaller at the takeoff comparing to Lee's and Jung's. Furthermore, Powell's horizontal velocity of the C.G. was maintained at the takeoff and touchdown. So, Lee and Jung need to change angle of the take-off leg the same as Powell's. Both Lee and Jung need to increase the angle of landing leg at the touchdown. In addition to increasing the angle Jung needs to improve the knee and ankle velocity with the hurdling leg.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.115-124
• /
• 2006

This study was conducted to investigate the running motion in the max-velocity phase(150-160m) and the fatigue phase(350-360m) during 400m sprint by performed elementary school athletes. Eighteen elementary school male athletes who achieved at least the 3rd place in the sprint at the Korea Gangwon-Do elementary school track and field meetings during 2004 and 2005 were selected as subjects. The running motions performed by the subjects were recorded using two 8mm high speed cameras at the nominal speed of 100 frames per second. The Direct Linear Transformation technique was adopted from the beginning of filming to the final stage of data extraction. KWON 3D motion analysis package program was used to compute the 3 Dimensional coordinates, smoothing factor in which lowpass filtering method was used and cutoff frequency was 6.0 Hz. The movement patterns during foot touchdown and takeoff for the running stride were related with the biomechanical consideration. Within the limitations of this study it is concluded: In order to increase running velocity, several conditions must be fullfilled at the instant of leg touchdown and takeoff during the fatigue phase(350-360m). First, the body C.O.G(Center of Gravity) height should be raised at the instant of leg touchdown and takeoff during the fatigue phase. Second, the foot contact time should be shortened and the takeoff distance should be increased at the foot takeoff during the fatigue phase. Third, the shank angular velocity with respect to a transverse axis through the center of gravity should be increased during the leg touchdown and takeoff in the fatigue phase. Forth, the active landing style described as clawing the ground with the sole of the foot should be performed during the leg touchdown and takeoff in the fatigue phase) phase. Fifth, In order to increase running velocity in the fatigue phase while taking a slightly greater leg knee angle and body lean angle within the range of the subject's running motion during the fatigue phase would result in greater flight distance.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.97-105
• /
• 2011

The purpose of this study was to investigate the kinetic factors of Stefan holm's take-off motion and provide the technical data. Collected data of the subject(height: 181 cm, weight: 71 kg, record: 230 cm) were used for the last two strides and take-off phase. The results were as follows: The vertical impulse force was 2044.8 N which was 2.49 times and the anterior-posterior impulse force was -1306.4 N which was 1.88 times of the subject's weight. The take-off leg angular velocities($\omega_x,\;\omega_y$) were switched drastically from clockwise to count clockwise direction between two-step touchdown and take-off. The highest jerk of the take-off foot was 368.97 m/s3 during the two step take-off and the take-off foot made an impact to the ground with 1225.07 m/s3 during the one step touchdown.

• Parasites, Hosts and Diseases
• /
• v.54 no.5
• /
• pp.631-636
• /
• 2016

This study aimed to develop a multiplex-touchdown PCR method to simultaneously detect 3 species of protozoan parasites, i.e., Cryptosporidium parvum, Giardia lamblia, and Cyclospora cayetanensis, the major causes of traveler's diarrhea and are resistant to standard antimicrobial treatments. The target genes included the Cryptosporidium oocyst wall protein for C. parvum, Glutamate dehydrogenase for G. lamblia, and 18S ribosomal RNA (18S rRNA) for C. cayetanensis. The sizes of the amplified fragments were 555, 188, and 400 bps, respectively. The multiplex-touchdown PCR protocol using a primer mixture simultaneously detected protozoa in human stools, and the amplified gene was detected in > $1{\times}10^3$ oocysts for C. parvum, > $1{\times}10^4$ cysts for G. lamblia, and > 1 copy of the 18S rRNA gene for C. cayetanensis. Taken together, our protocol convincingly demonstrated the ability to simultaneously detect C. parvum, G. lamblia, and C. cayetanenesis in stool samples.

• Structural Engineering and Mechanics
• /
• v.57 no.3
• /
• pp.403-423
• /
• 2016

The challenges involved with fatigue damage assessment of steel catenary riser (SCR) in the touchdown zone (TDZ) are primarily due to the non-linear behaviour of the SCR-seabed interaction, considerable uncertainty in SCR-seabed interaction modelling and geotechnical parameters. The issue of fatigue damage induced by the cyclic movements of the SCR with the seabed has acquired prominence with the touch down point (TDP) interaction in the TDZ. Therefore, the SCR-seabed response is critical for reliable estimation of fatigue life in the TDZ. Various design approaches pertaining to the lateral pipe-soil resistance model are discussed. These techniques have been applied in the finite element model that can be used to analyse the lateral SCR-seabed interaction under hydrodynamic loading. This study investigates the sensitivity of fatigue performance to geotechnical parameters through a parametric study. In this study, global analyses are performed to assess the influence of vertical linear seabed springs, the lateral seabed model and the non-linear seabed model, including trench evolution into seabed, seabed normalised stiffness, re-penetration offset parameter and soil suction resistance ratio, on the fatigue life of SCRs in the TDZ.

• Ocean Systems Engineering
• /
• v.8 no.3
• /
• pp.313-327
• /
• 2018

Meeting the touchdown point (TDP) target box is one of the challenges during catenary riser installation, especially for deep water or ultra-deep water riser systems. TDP location mismatch compared to the design can result in variation of riser configuration, additional hang-off misalignment, and extra bending loads going into the hang-off porch. A good understanding of the key installation parameters can help to minimize this mismatch, and ensure that the riser global response meets the design criteria. This paper focuses on investigating the potential factors that may affect the touchdown point location, and addressing the challenges both in the design stage and during installation campaign. Conventionally, the vessel offset and current are the most critical factors which may affect the TDP movement during installation. With the offshore exploration going deeper and deeper in the sea (up to 10,000ft), other sources such as the seabed slope and seabed soil stiffness are playing an important role as well. The impacts of potential sources are quantified through case studies for steel catenary riser (SCR) and lazy wave steel catenary riser (LWSCR) in deep water application. Investigations through both theoretical study and numerical validation are carried out. Furthermore, design recommendations are provided during execution phase for the TDP mismatch condition to ensure the integrity of the riser system.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.133-142
• /
• 2005

The purpose of this study was to compare of the kinematic variables from takeoff preparation to takeoff used by long jumpers who recorded over 8meters in 2002 Busan Asian Game and 2003 Daegu Universiade and 2001 national championship. The kinematic characteristics from the last three stride to takeoff at the takeoff board were analyzed such as velocities, heights and angles. The conclusion were as follows; In order to record over 8meters the national long jumpers should have under 5cm height variation at the penultimate stride of the run-up. In the approach phase the horizontal velocity of the jumpers should reach to 10m/s in touchdown at takeoff board The vertical velocity must have 3.75m/s simultaneously in order to record 8meters. The jumpers need to continue talent of the horizontal velocity in touchdown at takeoff board and require jumping power of the takeoff leg at takeoff board The appropriate body variation range ratio between takeoff and touchdown should be 1.2 vs 1 and the trunk angle at touch down on the board should be close to the erect posture for higher body flight.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.4
• /
• pp.705-714
• /
• 2012

In this paper, we study nonlinear equation arising in MEMS modeling electrostatic actuation. We will prove the local and global existence of solutions of the generalized parabolic MEMS equation. We present that there exists a constant ${\lambda}^*$ such that the associated stationary problem has a solution for any ${\lambda}$ < ${\lambda}^*$ and no solution for any ${\lambda}$ > ${\lambda}^*$. We show that when ${\lambda}$ < ${\lambda}^*$ the global solution converges to its unique maximal steady-state as $t{\rightarrow}{\infty}$. We also obtain the condition for the existence of a touchdown time $T{\leq}{\infty}$ for the dynamical solution. Furthermore, there exists $p_0$ > 1, as a function of $p$, the pull-in voltage ${\lambda}^*(p)$ is strictly decreasing with respect to 1 < $p$ < $p_0$, and increasing with respect to $p$ > $p_0$.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.2
• /
• pp.71-81
• /
• 2004

There are four methods of landing of B747-400 during the crosswind condition. Pilots can choose either one of them. Those are: Sideslip/Wing low, De-Crab during Flare, Touchdown in Crab, Combining Crab and Sideslip. They decide to use one method by what they have learnt before. During the flight, the pilots choose the method, which depends on the weather forecast, and then try to land according to it. However, the weather condition always changes. In other words, the weather during planning and landing can be different, which can provide a difference between the previously expected situation and the actual one. Therefore, it is very important for the pilots to have the situation awareness. This study shows the direction and the prevention to avoid those errors, which are based on actual landing data of B747-400.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.135-147
• /
• 2004

This study was conducted to investigate the technical factors of Lu Yu Fu vault actually performed by three men gymnasts participated in artistic gymnastics competition of 2003 summer Universiade in Daegu through the DLT method of three dimensional cinematography. To analyze these vaults, the instant events of Lu Yu Fu were set in the board touchdown(BTD), the board takeoff(BTO), the horse touchdown(HTD), the horse takeoff(HTO), the peak height(PH), the mat touchdown(MTD) respectively and the phases of that vault were set in the board contact(BC), the preflight(PRF), the horse contact(HC), the postflight(POF), the grounding on mat(GM) respectively After calculating the performance times, the CG displacement velocity, the kinetic energy impulse reaction force moment arm torque at the horse, the released angle piked angle addressed angle, the angular momentum angular velocity of whole body in x axis, and the horizontal displacement between the feet and CG, the following conclusions were reached. To perform the better Lu Yu Fu vault, a gymnast must have the large horizontal velocity of whole body with fast run-up, decrease the duration time and the horizontal vertical displacement of whole body in PRF, have the enough time to judge the correct magnitude and direction of force to brake or push the horse so as to lengthen the HC duration time at any cost. Also it is desirable to increase the horizontal vertical displacement of whole body in POF if possible, maintain the adequate piked position to decrease the angular velocity of whole body in x axis, prepare the grounding on mat previously and delay the release of the hand from the body to keep the angular momentum.