• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.262-268
• /
• 2008

Recently, as the demand for multimedia services based on the wireless technologies and mobile devices increases, Full-touch screen mobile devices adopting touch screen keyboards are emerging to cope with the limited display size and take advantage of the flexibility in the design of user interfaces. However, the text entry task, which is one of the main features of the mobile devices, decreases the competitive advantages of the touch screen keyboards over the physical keyboards or keypads due to the lack of physical feedbacks and the frequent occurrence of mistyping. This study aims to introduce a novel text entry method named Fuzzy Touch and compare this method with the conventional text entry method on a touch screen keyboard in terms of the performance (time, number of touch) and the subjective ratings (ease of use, overall preference).

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.106-114
• /
• 2016

Differential sensing methods are more effective in alleviating panel noise than single-line sensing, and thus have been increasingly used in the touch screen industry. However, they have a drawback: they tend to cancel out multiple touches and need touch position recovery algorithms. This paper introduces a novel algorithm of touch position recovery for differential sensing, which is a low-complexity but high-accuracy approach for determining multiple touch positions. We have implemented the proposed method in a touch screen controller system on a chip. In the simulation experiments using realistic touch screen models and a differential sensing circuit, the algorithm exhibited a high detection performance of a signal-to-noise ratio gain of up to 52.21 dB. Therefore, we can conclude that the proposed method is substantially more accurate than the previous method. Further, the proposed method incurs little or no overhead in terms of the detection speed and the chip size.

• Journal of Korea Game Society
• /
• v.6 no.3
• /
• pp.77-86
• /
• 2006

We have developed a virtual touch screen system which has improved on the standard functions of general tooth screen systems, and it also can be used for game applications. It is based on an image processing system which does not require a physical screen like traditional touch-screen system. Our system requires only two standard PC cameras, so that there is no limit of the size of the touch screen. The developed system can be installed easily and implemented with low cost, and can be applied to new kinds of games.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.11
• /
• pp.866-870
• /
• 2009

As touch-screen mobile phones pour into the market, demands for reusing existing mobile game contents by adding a touch-screen interface are increasing. But, the contents which are developed in existing does not have touch-screen interface and in order not to be automatic is difficult with touch- screen contents to convert. From the present paper uses keyboard interface information about the mobile game contents which does not have touch-screen interface and creates touch-screen interface with automatic the method which proposes. This method analyzes the type of key events which are used from the contents the screen keyboard layout of optimum and construct. And, key event where is confronted with automatic occurs about touch screen event and creates the screen interface which executes the keyboard event handler. In the end, experiment leads and the screen interface which has become optimum anger to the contents creating, confirms.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.1018-1023
• /
• 2012

Smartphone is integrated into the daily lives of all types of people not even young generation. A touch screen display is a primary input device of a smart phone, a tablet computer, etc. While there are many tough technologies in existence, resistive and capacitive are dominant and currently lead the touch screen panel industry. And a capacitive touch screen panel widely used in smart phones is coated with a material that stores electrical charges. In this study, we tried to manufacture gloves produced with electro-conducting leather as a tool to operate a touch panel screen. Therefore, electrically conductive materials, Polyaniline(PANI), Poly(3,4-ethylenedioxythiophene) (PEDOT), and Carbon nanotubes (CNT) were applied to the surface of leather to be used as a touching operator for capacitive touch screen panel. The leather samples were treated by simple painting method; firstly, they were painted with aqueous solution containing each of the electrically conductive materials and then dried. This cycle was repeated three times. Consequently, the treated leather samples showed electrical conductivity and reasonable working performance to the capacitive touch screen. And, PANI showed the best performance and highest electrical conductivity, and then PEDOT and, CNT in decreasing order. This is because the solubilities of PANI and PEDOT show higher than dispersibility of CNT. Thus, the concentration of conducting polymers was greater than that of CNT in the treating solutions.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.50-61
• /
• 2011

The Infrared touch method is generally used for a mid and large-size touch screen. But this method has several problems, such as difficulty with installation of a touch-object recognition device, limited application and coordinate error in multi-point touch system. Since we can take advantages of both color and local information when we use general cameras for a touch screen, a touch screen using general camera is more efficient than infrared one. It also has an advantage of easy installation of a touch-object device. However, it did not much appeal in a market because of several problems, such as color sensitivity, illumination and reflected light. In this paper, we study a method for a touch screen using a general camera and image processing method to recognize touch objects and coordinate calculation method to single and multi-point touch screen. It has the same recognition performance as an infrared touch screen for single-point method. And it does not have ghost point problem by using distance information of touch object and camera in multi-point touch system. But recognition performances of multi-point touch screen are less than single-point. If we improve execution time, this method can replace an infrared method for a single point touch screen, according to result of experience.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.617-618
• /
• 2011

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.16-18
• /
• 2012

이 논문은 멀티프로세싱으로 인해서 발생할 수 있는 touch screen polling I/O 성능 이슈를 다루고 있다. Touch screen이 장착된 휴대용기기가 점차 대중화되고 그 편한 사용성 만큼이나 쉽게 익숙해지고 있다. 하지만, 휴대용기기내에서 여러 가지 작업(multiprocessing or multitasking)을 동시에 처리하면서 생기는 문제들 중에 touch screen의 반응이 의도하지 않은 동작결과로 나타나는 경험을 하게 된다. 이 논문에서 이러한 부분에 집중하여 우선순위가 높은 다른 작업(process or task)과 동시에 touch screen 처리과정을 분석하여 개선책을 제안코자 한다. 또한 우리는 이러한 개선책을 증명하기 위해서 실제 구현을 통해서 확인한다. 개선된 방법은 이 상황과 비슷한 조건에서 활용이 가능할 것으로 판단한다.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.403-411
• /
• 2016

Objective: This study is concerned with the user interface (UI) design of touch screen based on the reaction time of Automated Teller Machine (ATM) user. Background: Adopting the touch screen technology, the ATM service has recently established a new user interface different from the existing button-type interface. Method: Experiments were conducted by simulating ATM touch screen layouts, and layouts were focused on location of menu buttons (left and right, top and bottom), number of menu buttons (8 and 12 buttons). Results: The results show that there are significant differences in correction ratio and reaction time by user groups, types of menu location, and the number of buttons. Conclusion and Applications: The results of this study can be used to provide baseline information for the interface design of ATM touch screen and the age differences in reaction time.

• Journal of Korea Multimedia Society
• /
• v.20 no.11
• /
• pp.1803-1810
• /
• 2017

A large amount of processing time is required if the process of detecting the touch position on the touch screen and displaying it on the display panel is performed only by software. In this paper, we propose a method to output information touched on the screen using H/W method in order to improve the response speed delay. In the FPGA module designed for the HDMI signal output to the display module, the touch information is input to the serial data signal including touch coordinate information, point size, and color information. Then the module render the image using HDMI signal input to the module and the touch information. This method has a pipeline structure so it has effect of reducing the delay time that occurs in outputting the touch information compared with the conventional software processing method.