• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.375-379
• /
• 2016

A current subtraction technique with parallel operation system is proposed to remove excessive current in touch screen application. The proposed current subtraction remove the current which go into the input node of charge amplifier. The value of subtraction current is same with current when touch screen is not touched. As a result, charge amplifier output is only proportional to variation of mutual capacitor, which make dynamic rage is increased. Also, Transmitter (Tx) driving signal and subtraction driving signal are out of phase each other. Thus, noise generated in Tx is cancelled. The proposed IC is implemented in a mixed-mode 0.18-um CMOS process. Overall system is designed for touch screen panel (TSP) with 16 driving lines and 8 sensing lines. 5-V supply voltages are used in the proposed circuits. For multiple Tx driving signal, Walsh codes are used and signal frequency is 300 khz. By using proposed technique, dynamic rage is improved 36 dB.

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.140-145
• /
• 2016

In this paper, we fabricate arrayed-type flexible capacitive touch sensor using liquid metal (LM) droplets (4 mm spatial resolution). Poly-4-vinylphenol (PVP) layer is used as a dielectric layer on the electrode patterned Polyethylene naphthalate (PEN) film. Bonding tests between hydroxyl group (-OH) on the PVP film and polydimethylsiloxane (PDMS) are conducted in a various $O_2$ plasma treatment conditions. Through the tests, we can confirm that non-$O_2$ plasma treated PVP layer and $O_2$ plasma treated PDMS can make a chemical bond. To measure dynamic range of the device, one-cell experiments are conducted and we confirmed that the fabricated device has a large dynamic range (~60 pF).

• 한국의류학회지
• /
• 제28권6호
• /
• pp.784-789
• /
• 2004

The purpose of this research was to analyze how the evaluation method affects the subjective hand evaluation of fabrics and to suggest the efficient evaluation method. Three methods such as the sense of sight ＆ touch, the sense of touch, and the sense of sight were respectively used when judges estimated the hand of fabrics using questionnaire. The result obtained by the method of touch was same as that by the method of sight ＆ touch. The time required for the evaluation by these two methods was statistically same. Consequently, the method of touch has no attraction compared to that of touch ＆ sight. In case of using the method of sight, 8 properties among 10 showed the same results as in the method of sight ＆ touch. The properties of [moogupda/kabyupda] and [shinchuksung-e-itda/ shinchuksung-e-upda] evaluated with the sense of sight were different from the results obtained by the other methods. These properties seem to be difficult to evaluate only by seeing the fabric on the table. For the precise evaluation, it is necessary to show dynamic movement of the fabric. The time required for the evaluation by the sense of sight was shorter than that by the other two methods.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권4호
• /
• pp.246-250
• /
• 2014

Large mutual capacitance touch screen panels (TSP) are susceptible to display and ambient noise. This paper presents a multi-touch detection algorithm using an efficient noise compensation technique for large mutual capacitance TSPs. The sources of noise are presented and analyzed. The algorithm includes the steps to overcome each source of noise. The algorithm begins with a calibration technique to overcome the TSP mutual capacitance variation. The algorithm also overcomes the shadow effect of a hand close to TSP and mutual capacitance variation by dynamic threshold calculations. Time and space filters are also used to filter out ambient noise. The experimental results were used to determine the system parameters to achieve the best performance.

• The Journal of Korean Physical Therapy
• /
• 제24권2호
• /
• pp.134-142
• /
• 2012

Purpose: This study examined the effect on postural control during the stimulation of haptic touch with fingertip on the stable surface at quiet standing posture, squat flexion stage, 60 degrees squat stage and squat extension stage. Methods: The postural sway was measured on the force platform, while 30 subjects were squatting, under three different haptic touch conditions (No Touch [NT], Light Touch [LT], Heavy Touch [HT]), above the touch pad in front of their body midline. Three different haptic touch conditions were divided into 1) NT condition; squatting as right index fingers held above the touch pad, 2) LT condition (<1N); squatting as the touch pad was in contact with right index fingers pulp with a pressure not exceeding 1N and 3) HT condition; squatting as subjects were allowed to use the touch pad for mechanical support by transmitting onto it with as much force, choosing with their index fingers. Results: There was significant decrease in LT, rather than that of NT (p<0.01), and in HT, rather than that of LT (p<0.01), as the results of the distance and velocity of center of pressure (COP) in mediolateral direction at quiet standing position. In anteroposterior direction, the distance and velocity of COP in LT and HT showed significant decrease, when compared to that of the data of NT (p<0.01). There was no significant difference between the 3 conditions (NT, LT, and HT), with respect to the distance and velocity of COP in mediolateral direction, during dynamic balance (squat flexion stage, squat extension stage) (p>0.05). In anteroposterior direction, the results of the distance and velocity of COP in HT showed significant decrease when compared to that of the data of NT (p<0.05). Conclusion: Light touch, during the task, decreased the postural sway at static balance. The results suggest that haptic touch should be applied, appropriately, because it varies the effects according to different conditions.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.169-172
• /
• 2009

본 논문은 비전기반 터치스크린에서 터치되는 물체에 대해 주변마스크를 이용하여 터치인식을 개선하는 방법에 대해 제안하고 있다. 기존의 비전기반 터치스크린은 단순히 임계값의 범위를 이용하여 터치를 인식하므로, 손으로 직접 터치할 경우 주먹이나 손목에서 노이즈가 생기는 등, 정확한 터치 인식이 어려웠다. 하지만 본 논문에서는 터치스크린에 근접하는 물체에서 모폴로지 연산을 수행하여 주변마스크를 추출하고, 그 부분에 대한 대비값의 변화를 이용한다. 이러한 동적정보를 이용하여 스크린을 터치할 때 잡음을 방지하고 손이 정확히 스크린에 터치되었을때만 터치로 인식할 수 있도록 하는 것을 목적으로 하고 있다.

• Ocean Systems Engineering
• /
• 제4권3호
• /
• pp.215-241
• /
• 2014

Steel catenary riser (SCR) is a popular/economical solution for the oil/gas production in deep and ultra-deep water. The behavioral characteristics of SCR have a high correlation with the motion of floating production facility at its survival and operational environments. When large motions of surface floaters occur, such as FPSO in 100-yr storm case, they can cause unacceptable negative tension on SCR near TDZ (touch down zone) and the corresponding elastic deflection can be large due to local dynamic buckling. The generation, propagation, and decay of the elastic wave are also affected by SCR and seabed soil interaction effects. The temporary local dynamic buckling vanishes with the recovery of tension on SCR with the upheaval motion of surface floater. Unlike larger-scale, an-order-of-magnitude longer period global buckling driven by heat and pressure variations in subsea pipelines, the sub-critical local dynamic buckling of SCR is motion-driven and short cycled, which, however, can lead to permanent structural damage when the resulting stress is greatly amplified beyond the elastic limit. The phenomenon is extensively investigated in this paper by using the vessel-mooring-riser coupled dynamic analysis program. It is found that the moment of large downward heave motion at the farthest-horizontal-offset position is the most dangerous for the local dynamic buckling.

• 정보저장시스템학회논문집
• /
• 제8권2호
• /
• pp.61-66
• /
• 2012

In HDD industry, many technologies have been developed and investigated as means to increase the areal density of drives. Especially, heat assisted magnetic recording (HAMR) system has been considered as the next generation storage device. Most of the HAMR systems use near field optics as heating mechanism. Therefore, light delivery system is indispensable. We considered the light delivery system with laser diode (LD) mount and optical fiber. Mass and stiffness of the HAMR system using these LD mount and optical fiber are changed. The mass and stiffness of the HAMR system affects the slider dynamic behavior. It is necessary to analyze touch down (TD) and take off (TO). And, we performed the TD-TO experiment with HAMR suspension. Finally, we analyzed the result of TD-TO experiments. And we suggested the design of HAMR suspension to improve TD-TO performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.791-792
• /
• 2011

• 전자공학회논문지
• /
• 제52권4호
• /
• pp.71-79
• /
• 2015

본 논문에서는 상호 정전용량 터치스크린의 single line sensing 방법에서의 단점을 해결하기 위한 성능향상 구조를 제안한다. 제안 구조는 Dual sensing 기법과 voltage shifting 기법을 도입하여 센싱 신호의 노이즈를 효과적으로 제거하고 터치 유무의 센싱 신호 차이를 증가시킨다. Dual sensing 기법은 구동신호의 양방향 엣지를 사용하여 integration 속도를 2배로 증가시켜 감지시간을 감소시킨다. Voltage shifting은 ADC의 입력신호 동작범위를 최대화하여 신호 대 노이즈비 (SNR)를 개선한다. 23" 대형 상용 터치스크린을 이용하여 simulation 및 측정한 결과로 제안된 센싱기법은 43dB의 SNR 성능을 가지며, 기존 방식 대비 2배의 스캔 속도를 제공하여 대형 터치스크린을 위한 적합한 기술임을 보인다. 제안된 센싱기법은 현재 매그나칩 CMOS 0.18um 공정으로 TSP 컨트롤러칩으로 구현되었다.