• Bulletin of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.214-220
• /
• 1990

We have studied the Infrared Multiphoton Dissociation (IRMPD) of 1-bromo-3-chloropropane by using the pulsed $CO_2$ laser. The product yields and the HCl/HBr branching ratios in IRMPD of $BrCH_2CH_2CH_2Cl$ are studied under the focused beam geometry as a function of buffer gas (He) pressure, laser energy, and photolysing wavelength. It is observed that the total dissociation yield has a laser energy dependence of 1.8-2.0 power order and the branching ratio is very slightly dependent on the pulse energy for the laser lines employed. The dependences of total dissociation yield and branching ratio on the buffer gas pressures show that the dissociation yield monotonically decreases and the branching ratio slightly decreases with the increase of the buffer gas pressure. The Energy-Grained Master Equation (EGME) was applied to explain the laser pulse energy and the buffer gas pressure(He) dependence of the dissociation yield and the branching ratio.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.149-155
• /
• 2001

Recently, it is required to design higher stage pressure ratio compressor while maintaining equal adiabatic efficiency. To increase the stage pressure ratio, blade rotational speed or diffusion factor should be increased. In the case of increasing rotational speed, relative speed of flow at blade leading edge is well supersonic. In supersonic blade, total pressure loss is mainly due to shock wave and blade leading edge thickness should be very thin to minimize the shock wave loss. As a result, the blade is like to be week in terms of mechanical strength and the manufacturing cost is very high because NC machining is necessary. It is also one of big hurdle to overcome to make small compressor. In this paper, the effects of blade leading edge to the performance of supersonic blade In terms of total pressure loss. The efficiency of already known method to make thin blade leading edge from the casted blade with rather thick leading edge thickness is also assessed.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.39-47
• /
• 2010

In this paper, a total stress analysis method for gravity quay walls is suggested. The method can evaluate the displacement of the quay walls considering the effect of excess pore pressure developed in backfill soils. This method changes the stiffness of backfill soils according to the expected magnitude of the excess pore pressure. For practical application, evaluation methods are suggested for determining the excess pore pressure ratio developed in the backfill soils and the backfill stiffness that corresponds to the excess pore pressure ratio. This method is important in practical applications because the displacement of the quay walls can be evaluated by using only the basic input properties in the total stress analysis. The applicability of the suggested method was verified by comparing the results of the analysis with the results of 1-g shaking table tests. From the comparison, it was found that the calculated displacements from the suggested method showed good agreement with the measured displacements of the quay walls. It was also found that the excess pore pressure in backfill soils is a governing influence on the dynamic behavior of quay walls.

• Journal of Nutrition and Health
• /
• v.30 no.4
• /
• pp.451-457
• /
• 1997

This study was designed to investigate the effect of the ratio of energy from carbohydrate to total calories on dietary intake, obesity index, blood pressure, and blood lipid content in cardiovascular disease patients over 35 years old. A total of 552(227 male, 325 female) subjects were divided into three groups according to carbohydrate/total energy ratio : carbohydrate ratios below 25 percent were in the low carbohydrate group( <61.1%), between 25 and 75 percent carbohydrate were medium($\geq$61.1-<74.7%), and higher than 75 percent were in the high carbohydrate group($\geq$74.7%). The anthropometric data, nutrient intake, serum lipid levels, and blood pressure of each group were compared with one another. For men and women with high carbohydrate intakes, Inadequate nutritional intake was observed. Abdominal fat accumulation and blood TC level for men in the high carbohydrate group were higher than in medium or low carbohydrate groups. Therefore, it seems that high carbohydrate intake may produce adverse effects on abdominal fat accumulation and blood lipid patterns. Blood pressure, however, was significantly higher for women in low and high carbohydrate groups than in medium carbohydrate group. These results suggest that extremely high and low carbohydrate intake may raise the risk of cardiovascular disease and that it is necessary to consume nutritionally balanced meals. This can be done by controlling the ratio of dietary carbohydrate at a medium level in order to prevent and/or to reduce the risk.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.744-749
• /
• 2011

In this study, determination method of initial optimal nozzle expansion in pintle rocket was investigated. The initial optimal initial nozzle expansion was decided by maximizing the mass-averaged thrust coefficient that is calculated from thrust coefficient of minimum and maximum chamber pressure. The determination of initial optimal initial nozzle expansion was equivalent to that of the minimum propellant mass which was required for obtaining the desired mission performance. The highest pressure, thrust turndown ratio and total impulse ratio effected on the initial optimal nozzle expansion. Among them, total impulse ratio had great influence on the initial optimal nozzle expansion.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.1
• /
• pp.44-53
• /
• 2004

This paper is to investigate the combustion characteristics with a three dimensional chemical reacting flow on the aspect ratio of an exit configuration of the slit type nozzle for the fuel injection and to device the methods of combustion／mixing enhancement. The results show that both inside inflow and slit side vertices should be considered from a viewpoint of the mixing. The combustion efficiency becomes the smallest at aspect ratio, where the aspect ratio is less and more than unity, respectively. The total pressure loss becomes the largest at aspect ratio of unity due to the high penetration. All results imply that a streamwise very long slit is desirable with respect to the combustion and the pressure loss.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.262-269
• /
• 2009

This study examined the separation characteristics of particles in the rainfall runoff from paved roads using a ${\varphi}7.5$ cm hydrocyclone. The volume fraction and total suspended solids concentrations in the overflow and underflow from the hydrocyclone, as well as the separation efficiency were determined. The results indicated that the overflow volume increased with increasing operational pressure, but decreased with decreasing ratio of underflow outlet to inlet sizes ($D_u/D_i$), while the underflow to overflow volumes showed contrary behavior. The total suspended solid (TSS) concentration ratio between the overflow and inflow ($TSS_{over/in}$) decreased as a function of the operational pressure, while the corresponding ratio of underflow to inflow ($TSS_{under/in}$) increased. There was no visible difference in the $TSS_{over/in}$ with increasing $D_u/D_i$ ratio, but the $TSS_{under/in}$ decreased sharply. The particle removal efficiency was mainly affected by the particle size.

• Korean Journal of Adult Nursing
• /
• v.15 no.2
• /
• pp.267-277
• /
• 2003

Purpose: The purpose of this study was to evaluate the applicability of braden scale to assess pressure ulcer risk patients and to identify additional risk factors of pressure sores in an neurologic intensive care unit. Method: The subjects of this study were 66 patients in neurologic intensive care units. Data was prospectively collected from Sep. to Dec., 2002. Data were analyzed by mean, percentage, t-test, chi-square, discriminant analysis using Spss pc+. Result: The results of this study were as follows: 1) There was a significant difference between scoring of braden scale and pressure ulcer development. The subscales that predicted pressure ulcer development using braden scale only were sensory perception, moisture, mobility, friction & shear. By using these subscales, sensitivity was 86.7%, and specificity was 61.1%, and total hit ratio was 72.7%. 2) Additional pressure ulcer risk factors which showed significance for discriminating two group were protein, albumin, gender, level of consciousness, pattern of bowel elimination. By using the combination of these additional risk factors in addition to the braden scale, total hit ratio increased to 84.8%. Conclusion: This data suggest that albumin, protein, gender, level of consciousness, pattern of bowel elimination in addition to the braden scale should be included in the pressure sore assessment tool.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.65-71
• /
• 2010

Performance test of the 75ton class turbopump turbine was performed. Using the measured turbine power characteristics in the wide-range operational conditions, variations of nozzle velocity ratio, total pressure loss, and relative flow angle to the pressure ratios and rotational speeds are quantified. Efficiency and nozzle exit pressure behavior was also investigated and compared with 30ton turbopump turbine data. A rotor blade was redesigned based on the test results and CFD analysis.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.12
• /
• pp.1177-1184
• /
• 2005

A numerical analysis was carried out on the heat and mass transfer, and pressure drop characteristics of the modular tube bundle heat exchanger. The finite volume method with a $k-\varepsilon$ turbulence model was used for the analysis. Due to condensation, the total heat transfer rate is observed about $4\~8\%$ higher than that on dry surfaces. Total heat transfer rate increases with increase in the velocity, temperature and relative humidity of incoming air. It also increases with decreasing the aspect ratio of heat exchanger tube. The inlet velocity of cooling water has little effect on the total heat transfer when the other conditions are fixed.