• The Korean Journal of Food And Nutrition
• /
• v.31 no.1
• /
• pp.17-23
• /
• 2018

The objective of this study was to compare physicochemical, microbial, and antioxidant properties of domestic and imported wheat kernels for bread making. Two domestic (JK1, 2) and three imported (ND, DNS, and CWRS) kernels were compared. Domestic kernels had higher moisture contents, and lower ash and protein contents (p<0.05). In grain characteristics, JK1 had 13.62% of damaged kernels, which was the highest among the samples (p<0.05). JK2 was similar to imported kernels in the ratio of sound kernels, foreign materials, and damaged kernels. Kernel size of JK1, 2 was larger than the imported kernels; therefore, kernels area and perimeter were higher by the image analyzer. Domestic kernels hid lower total aerobic counts the imported kernels (p<0.05). Domestic kernels and DNS had no yeast, while NS and CWRS had yeast in kernels. DNS (3.08 mg gallic acid equivalent (GAE)/g) had the highest total polyphenol content (TPC), followed by JK1 (2.81 mg GAE/g). JK2 had the lowest amount of TPC as 2.26 mg GAE/g. Total flavonoid content (TFC) was the highest in DNS as 0.44 mg catechin equivalent (CE)/g and JK2 was the lowest as 0.12 mg CE/g. Domestic wheat kernels had lower protein content and lightness than the imported wheat kernels so that flour from domestic wheat kernels may have lower quality for baking.

• PNF and Movement
• /
• v.19 no.2
• /
• pp.279-285
• /
• 2021

Purpose: This study aimed to develop new digital navicular drop test (ND-NDT) equipment and to determine its validity and reliability. Methods: A total of 24 healthy male and female adults, who fully understood the purpose of the study and gave consent to participate in the study, were selected as participants. The NDT and ND-NDT were conducted in the dominant foot of the participants in a random order. For the NDT, the position of the navicular bone was marked with a pen first; then, the height of the navicular bone from the ground was measured in both sitting and standing positions. For the ND-NDT, after the sticker-type reflection markers were attached to the position of the navicular bone, the height of the navicular bone from the ground was measured in both sitting and standing positions. To assess the validity of the diagnostic tests, the same examiner measured the height of the medial longitudinal arch (MLA) three times in both the sitting and standing positions. To assess the inter-rater reliability of the ND-NDT, three examiners, in a random order, attached the sticker-type reflection markers to the position of the navicular bone and then measured the height of the MLA in both positions. Results: In the sitting position, the Pearson correlation coefficient (r) between the two diagnostic tests was very high (r = 0.97) and statistically significant. In the standing position, the Pearson correlation coefficient (r) between the two tests was 0.95, which was also statistically significant. The ICC_2,1 values in the sitting and standing positions were 0.93 and 0.95, respectively, indicating significantly high inter-rater reliability. Conclusion: The ND-NDT equipment showed very high diagnostic validity, as well as excellent inter-rater reliability, indicating the clinical usefulness of the equipment as a diagnostic system for confirming pes planus.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.209-220
• /
• 2022

Objectives: This study was performed to suggest how to re-establish criterion for toxic substances under the Chemical Control Act (CCA) in South Korea by comparing the GHS (Globally Harmonized System of Classification and Labeling of Chemicals) score and toxic properties. Methods: Toxic substances were classified into seven groups (Acute toxicity (1A), Chronic toxicity (2C), Environmental hazards (3E), Acute toxicity & chronic toxicity (4AC), Chronic toxicity & environmental hazards (5CE), Acute toxicity & environmental hazards (6AE), and Acute toxicity & chronic toxicity & environmental hazards (7ACE)) according to their toxic properties. The GHS score was calculated to sum up five toxicity indicators (health acute toxicity, health repeated toxicity, carcinogenicity, health other chronic toxicity and environmental hazards). Results: The GHS score of 7ACE was higher by 7 times that of 1A. 1A is the only group which has lower than the total GHS score. The highest score was 47, for sodium chromate (CAS no. 7775-11-3), which belongs to group 7ACE. This is classified as acute toxicity, carcinogenicity, germ cell mutagenicity, reproductive toxicity, and acute and chronic environmental hazard. On the other hand, the lowest score was 2.75, which was assigned to 177 chemicals belonging to group 1A. When the health acute toxicity indicator was omitted from the toxic criterion, toxic substances could be divided into the sub-groups 'human chronic hazards group' (HCG) and 'environmental hazards group' (EG) according to their GHS score and properties. Conclusions: The proposed criterion for toxic substances is to establish sub-groups defined as HCG and EG for separate control and that the 1A group be moved to substances requiring preparation for accidents under the CCA.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.843-853
• /
• 2021

The objectives of this paper were to simply estimate soil loss levels as caused by wind in reclaimed tidal flat land (RTFL) and the threshold wind velocity in the RTFL. For this experiment, RTFL located at Haenam Bay was selected and a total of 150 soil samples were collected at the Ap horizon from the five soil series. The particle distribution curves, including the limit of the non-erodible particle size (D > 0.84 mm) for each Ap horizon soil, show that the proportions of non-erodible particle sizes that exceeded 0.84 mm were 4.3% (Taehan, TH), 8.9% (Geangpo, GP), 0.5% (Bokchun, BC), 1.6% (Poseung, PS) and 1.4% (Junbook, JB), indicating that the amount of non-erodible soil particles increased with an increase in the sand content. The average monthly, daily and instantaneous wind velocities were higher than the threshold friction velocity (TFV) calculated according to the dynamic velocity (V_d) by Bagnold, while the average monthly wind velocity was lower than those of the TFV suggested by the revised wind erosion equation (RWEQ) and wind erosion prediction system (WEPS). The susceptible proportions of erodible soil particles from the Ap horizon soil samples from each soil series could be significantly influenced by the proportion of sand particles between 0.025 and 0.5 mm (or 0.84 mm) in diameter regardless of the threshold wind velocity. Thus, further investigations are needed to estimate more precisely soil erosion in RTFL, which shows various soil characteristics, as these estimations of soil loss in the five soil series were obtained only when considering wind velocities and soil textures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.89-101
• /
• 2006

This study is a part of ???A study of the community noise:new guideline and policy' which have three main topics and ten sub-topics. Accordingly this part deals with a transpotation noise specifying road traffic ,railroad and aircraft noise, respectively. At first, the ,roadside traffic noise of whole country in 2004 ,22 major cities of total 29 was exceeded the envionmetal noise standards, 55dB(A) at night time ,therefore 24 milion people ,52.4% of korean, who reside at roadside estimates to be exposured the basic problems of this serious noise polluation comes from:: i)It's very limited noise mitigation measures against to continuously increase the number of automobile yearly. ii) and at beginning of road design, It has been neglect to introduce the anti-noise design and layout of road structural scheme as gadient,cutting and viaduct,embankment and zonning of roadside land-buffer area and also re-designation of noise sensitive areas,etc. Secondly ,concerned with the railroad trafffic noise, a inhabitants who are over the envionmetal noise limits,70dB(A), 65 dB(A) in day and night for 34 locations of mayor cities was exposured of 167,000 and 329,000 respectively. With the development of noise mitigation schemes in line with this study it is likely that noise monitoring system needs new installation as well as common use of noise assessment index with $L_{MAX}\;and\;L_{EQ}$. Lastly,noise complaints of millitary aircraft has been rapidly increasing ,so 2.9%(1.4 minion) person demands a compansation of \2,133 billion complying with their requirements we suggest to minimise the airport noise that is to develop of noise abatement procedure ,to make new noise index, to increase budget for house insulations and also to more increase of those the noise monitoring system and to unify the management etc.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.4
• /
• pp.265-281
• /
• 2019

We present new BVRI light curves of UY UMa with no O'Connell effect and a flat bottom secondary eclipse. Light curve synthesis with the Wilson-Devinney code gives a new solution, which is quite different from the previous study: UY UMa is an A-subtype over-contact binary with a small mass ratio of q = 0.21, a high inclination of 81°.4, a small temperature difference of ΔT=18°, a large fill-out factor of f = 0.61, and a third light of approximately 10% of the total systemic light. The absolute dimensions were newly determined. Seventeen new times of minimum light have been calculated from our observations. The period study indicates that the orbital period has intricately varied in a secular period increase in which two cyclical terms with periods of 12^y.0 and 46^y.3 are superposed. The secular period increase was interpreted to be due to a conservative mass transfer of 2.68 × 10^-8 M_⊙/yr from the less massive to the more massive star. The cyclical components are discussed in terms of double-light time contributions from two additional bound stars. The statistical relations of Yang & Qian (2015) among the physical parameters of 45 deep, low mass ratio contact binaries were revisited by using the physical parameters of UY UMa and 25 Kepler contact binaries provided by Şenavci et al. (2016).

• Quality Improvement in Health Care
• /
• v.22 no.2
• /
• pp.75-90
• /
• 2016

Objectives: This study measures the level of cognition of employee's patient safety culture and evaluates the current level through comparing the results to external levels. Ultimately it is performed to construct a strategic improvement plan through the basic database for patient's safety culture. Methods: A questionnaire survey of self reporting type was carried out using structured questionnaire of the patient's safety culture for employees currently employed in a hospital. Total responders was 1,129 and a response rate was 54.6%. The survey results were calculated with a percent positive response, and the current level was evaluated by comparing with the survey results of a hospital (2009 and 2014) and the survey result of The Agency for Healthcare Research and Quality(2014). Results: Sub-dimension of high percent positive response for each area were 'teamwork within hospital units' (80%), 'feedback & communication about error' (73%) and 'supervisor/manager expectations & actions promoting safety' (67%). Meanwhile, 'teamwork across hospital units' (31%), 'hospital management support for patient safety' (29%), 'staffing' (27%) and 'non-punitive response to error' (17%) were relatively low percent positive response. Compared to the survey results of AHRQ (2014) for each area, 'teamwork within hospital units' (80%), 'feedback & communication about error' (73%), 'frequency of event reporting' (66%) were at the top 50% percentile level and the remaining sub-dimensions showed a very low level in the lower 10% percentile area. Conclusion: In order to establish a system for patient safety culture within the hospital and evaluate the effect on this, it is necessary to periodically evaluate the patient's safety culture and establish regulations on hospital safety culture to comply with this.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.188-194
• /
• 2012

Cognitive networks (CNs) are capable of enabling dynamic spectrum allocation, and thus constitute a promising technology for future wireless communication. Whereas, the implementation of CN will lead to the requirement of an increased energy-arrival rate, which is a significant parameter in energy harvesting design of a cognitive user (CU) device. A well-designed spectrum-sensing scheme will lower the energy-arrival rate that is required and enable CNs to self-sustain, which will also help alleviate global warming. In this paper, spectrum sensing in a multi-user cognitive ad hoc network with a wide-band spectrum is considered. Based on the prospective spectrum sensing, we classify CN operation into two modes: Distributed and centralized. In a distributed network, each CU conducts spectrum sensing for its own data transmission, while in a centralized network, there is only one cognitive cluster header which performs spectrum sensing and broadcasts its sensing results to other CUs. Thus, a wide-band spectrum that is divided into multiple sub-channels can be sensed simultaneously in a distributed manner or sequentially in a centralized manner. We consider the energy consumption for spectrum sensing only of an analog-to-digital convertor (ADC). By formulating energy consumption for spectrum sensing in terms of the sub-channel sampling rate and whole-band sensing time, the sampling rate and whole-band sensing time that are optimal for minimizing the total energy consumption within sensing reliability constraints are obtained. A power dissipation model of an ADC, which plays an important role in formulating the energy efficiency problem, is presented. Using AD9051 as an ADC example, our numerical results show that the optimal sensing parameters will achieve a reduction in the energy-arrival rate of up to 97.7% and 50% in a distributed and a centralized network, respectively, when comparing the optimal and worst-case energy consumption for given system settings.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.5
• /
• pp.708-726
• /
• 2018

In this study, we examined the contribution of nitrogen oxides and volatile organic compounds emitted from China and Japan to ozone concentrations over Gwangyang-bay, South Korea. We used a chemical transport model, Community Multi-scale Air Quality model, and its instrumented sensitivity tool, High-order Decoupled Direct Method. Intercontinental Chemical Transport Experiment-Phase B 2006 for East Asia and Clean Air Policy Support System 2007 emissions inventories for South Korea were used for the ozone simulation. During the study period, May 2007, the modeled maximum daily 8-hr average ozone concentration among seven air quality monitors in Gwangyang-bay was 68.8 ppb. The contribution of $NO_x$ emissions from China was 19.5 ppb (28%). The highest modeled ozone concentrations and Chinese contributions appeared when air parcels were originated from Shanghai area. The observed 8-hr average ozone concentrations in Gwangyang Bay exceeded the national ambient air quality standard (60 ppb) 203 times by daytime and 56 times by nighttime during the period. It was noticed that many exeedances happened when contribution of Chinese emissions to ozone concentrations over the area increased. Sensitivity analysis shows that a reduction in Chinese $NO_x$ and VOC emissions by 15% could lessen the total exceedance hours by 24%. This result indicates that high ozone concentrations over Gwangyang-bay are strongly enhanced by Chinese emissions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.995-1002
• /
• 2005

An orthogonal frequency division multiplexing(OFDM) system has the problem of the peak-to-average power ratio(PAR). In general, in order to obtain optimal PAR reduction using the partial transmitted sequence(PTS), the total search for the number of sub-blocks and the rotation factors must be accomplished. As the number of sub-blocks and rotation factors increases, PAR reduction improves, such that complexity increases exponentially and the process delay occurs simultaneously. Therefore a technique that reduces PAR, which is almost close to optimal, and the amount of calculation is desired. In this paper a new method using genetic algorithm(GA), which is widely used to search for a point that is globally optimal in many problems, is proposed to search for a rotation factor that reduces simultaneously both the PAR and the amount of calculation, such that the complexity of calculation and the process time are reduced at the same time, Comparison is performed between the proposed method and the various techniques developed previously. The superiority of proposed method is presented by demonstrating the reduction of complexity while a similar PAR reduction is obtained.