• KIEAE Journal
• /
• v.15 no.3
• /
• pp.21-28
• /
• 2015

Purpose: In this study, we analyzed the energy performance levels and high-performance technology trends through the case studies of foreign high-performance buildings. Method: Buildings built within 10 years were selected for the analysis of recent trends. we analyzed the buildings of U.S.A, Germany and Japan using LEED certified buildings, Passive House certified buildings and CASBEE certified buildings database for the case study of foreign high-performance buildings. A total of 20 high-performance buildings including 14 cases in U.S.A, 4 cases in Germany and 4 cases in Japan were selected. Annual energy consumption levels for 20 high-performance buildings were collected with the actual energy consumption data or data from simulation programs officially recognized by DOE. Annual energy consumption were compared with the energy performance standard of the office buildings in the CBECS database, ASHRAE Standard 90.1-2004 and Building Energy Efficiency Rating System in Korea. Result: The order of the green strategies applied in the main categories are Renewable Energy(63%), Indoor Environment Control(51%), Envelope Improvement(44%) and HVAC System & Control(28%). Specified strategies most widely used in the sub-categories are high-performance Insulation (70%), High Efficiency Heating, Cooling Source Equipment(85%), Photovoltaic&Solar Thermal(80%) and Daylighting(80%).

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.4
• /
• pp.32-46
• /
• 2020

In this study, an analysis is conducted to understand the effect of the cabin crew's image-making autonomy on job enthusiasm, service performance and organizational performance. And this is conducted on cabin crew members in airlines with autonomy based on image making standards and a total of 109 copies are used for final analysis. First, the image-making autonomy show significant positive (+) influence on all of the sub-factors of job enthusiasm such as job vitality, job commitment, and job commitment. Second, all sub-factors of job enthusiasm, job vitality, job commitment and job commitment show a significant positive (+) influence on service performance. Third, service performance show a significant positive (+) influence relationship on organizational performance. As a result, it is expected that airlines will be used as a basis for easing the regulations for image making of cabin crew and introducing an autonomous management system in the future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.760-766
• /
• 2018

The present study investigates the effect of PMMA and BN content on microstructure, mechanical and dielectric properties of silicon nitride($Si_3N_4$) ceramics in $Y_2O_3-Al_2O_3$ additive system. The total additive content was fixed at 8 wt.% and the amount of PMMA varies from 0 to 40 wt.% and BN varies from 0 to 36 wt.%, respectively. The crystalline phases of the samples were determined by X-ray diffraction analysis. All the sintered sample shows complete transformation of ${\alpha}$ to ${\beta}-Si_3N_4$ during the sintering process indicated that the phase transformation was unaffected by the PMMA or BN content. However, the microstructure shows that the residual porosity increased with increasing PMMA and BN content. In addition, the flexural strength and the dielectric constant decrease with addition of PMMA and BN due to the residual porosity. This article provides empirical study of design parameters for $Si_3N_4$-based radome materials.

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.1-7
• /
• 2001

This paper investigates the characteristics of a newly developed high density hollow cathode plasma(HCP) system and its application for the etching of silicon wafers. We used $SF_6$ and $O_2$ gases in the HCP dry etch process. This paper demonstrates very high plasma density of $2{\times}10^{12}cm^{-3}$ at a discharge current of 20 rna, Silicon etch rate of 1.3 ${\mu}m$/min was achieved with $SF_6/O_2$ plasma conditions of total gas pressure of 50 mTorr, gas flow rate of 40 seem, and RF power of200W. This paper presents surface etching characteristics on a crystalline silicon wafer and large area cast type multicrystlline silicon wafer. We obtained field emitter tips size of less than 0.1 ${\mu}m$ without any photomask step as well as with a conventional photolithography. Our experimental results can be applied to various display systems such as thin film growth and etching for TFT-LCDs, emitter tip formations for FEDs, and bright plasma discharge for PDP applications. In this research, we studied silicon etching properties by using the hollow cathode plasma system.

• Geomechanics and Engineering
• /
• v.30 no.2
• /
• pp.107-121
• /
• 2022

Coal pillar assessment is of broad importance to underground engineering structure, as the pillar failure can lead to enormous disasters. Because of the highly non-linear correlation between the pillar failure and its influential attributes, conventional forecasting techniques cannot generate accurate outcomes. To approximate the complex behavior of coal pillar, this paper elucidates a new idea to forecast the underground coal pillar stability using combined unsupervised-supervised learning. In order to build a database of the study, a total of 90 patterns of pillar cases were collected from authentic engineering structures. A state-of-the art feature depletion method, t-distribution symmetric neighbor embedding (t-SNE) has been employed to reduce significance of actual data features. Consequently, an unsupervised machine learning technique K-mean clustering was followed to reassign the t-SNE dimensionality reduced data in order to compute the relative class of coal pillar cases. Following that, the reassign dataset was divided into two parts: 70 percent for training dataset and 30 percent for testing dataset, respectively. The accuracy of the predicted data was then examined using support vector classifier (SVC) model performance measures such as precision, recall, and f₁-score. As a result, the proposed model can be employed for properly predicting the pillar failure class in a variety of underground rock engineering projects.

• Journal of ILASS-Korea
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2009

This paper present the diesel fuel spray evolution and atomization performance in a multi-hole nozzle in terms of injection rate, spray evolutions, and mean diameter and velocity of droplets in a compression ignition engine. In order to study the effect of split injection on the diesel fuel spray and atomization characteristic in a multi-hole nozzle, the test nozzle that has two-row small orifice with 0.2 mm interval was used. The time based fuel injection rate characteristics was analyzed from the pressure variation generated in a measuring tube. The spray characteristics of a multi-hole nozzle were visualized and measured by spray visualization system and phase Doppler particle analyzer (PDPA) system. It was revealed that the total injected fuel quantities of split injection are smaller than those of single injection condition. In case of injection rate characteristics, the split injection is a little lower than single injection and the peak value of second injection rate is lower than single injection. The spray velocity of split injection is also lower because of short energizing duration and small injection mass. It can not observe the improvement of droplet atomization due to the split injection, however, it enhances the droplet distributions at the early stage of fuel injection.

• The Journal of Information Systems
• /
• v.28 no.3
• /
• pp.39-58
• /
• 2019

Purpose A digital twin is a digital replication of a physical system. Gartner identified the digital twin as one of the Gartner Top 10 Strategic Technology Trend for three years from 2017. The rapid development of the digital twin market is expected to bring about innovation and change throughout society, and much research has been done recently in academia. In this research, we tried to explore the main research trends for digital twin research. Design/methodology/approach We collected the digital twin research from Web of Science, and analyzed 804 articles that was published during time span of 2010-2018. A total of 41 key authors were selected based on the frequency of citation. We created a co-citation matrix for the core authors, and performed multivariate analysis such as cluster analysis and multidimensional scaling. We also conducted social network analysis to find the influential researchers in digital twin research. Findings We identified four major sub- areas of digital twin research: "Infrastructure", "Prospects and Challenges", "Security", and "Smart Manufacturing". We also identified the most influential researchers in digital twin research: Lee EA, Rajkumar R, Wan J, Karnouskos S, Kim K, and Cardenas AA. Limitation and further research suggestion were also discussed as a concluding remarks.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.399-410
• /
• 2012

Due to development of modern medical services and economics, people raised expectation and demand about medical services from previous disease treatment to comprehensive health care covering prevention and health care. Responses of each medical facility to these social needs and the evolution of concept of medicine rapidly occur. The health examination centers are being operated with the purpose of health examination and this trend is reflected on several aspects such as the size of the facilities, function and configuration of space in health examination centers. Thus, health examination centers consisting of various space systems appear, but this trend and interpretations are lacking. Therefore, the purpose of this study is to draw trends of system through analysis of types and its evolved space systematic analysis and establish it. Analysis targets were classified into small, medium and large groups by sizes based on number of space and a total of 12 health examination centers in four for each category were selected. As research methods, functional relationship of space was examined through analysis of type in which segmentalized type tools were applied in local units. The flow diagram was established based on direction turning point and was classified into sub-flow and main-flow in local units and the systems between local units were derived. Finally, the results of this study can be summarized as the following three results. 1) The space connection system of health examination center showed four systems such as circulation, independence, continuation, and network. 2) Local type indicators and global type indicators which were evolved more from limitation of type analysis tools in existing research were derived so that more systematic analysis could be made. 3) Network system is distributed approach system and space for each function is formed around public space.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.4
• /
• pp.401-413
• /
• 2015

In this study the progressive collapse resisting capacity of a RC beam-column subassemblage with and without strengthening was investigated. Total of five specimens were tested; two unreinforced specimens, the one designed as gravity load-resisting system and the other as seismic load-resisting system, and three specimens reinforced with: (i) bonded strand, (ii) unbonded strand, and (iii) side steel plates with stud bolts. The two-span subassemblages were designed as part of an eight-story RC building. Monotonically increasing load was applied at the middle column of the specimens and the force-displacement relationships were plotted. It was observed that the gravity load-resisting specimen failed by fractures of re-bars in the beams. In the other specimens no failure was observed until the maximum displacement capacity of the actuator was reached. Highest strength was observed in the structure with unbonded strand. The test result of the specimen with side steel plates in beam-column joints showed that the force-displacement curve increased without fracture of re-bars. Based on the test results it was concluded that the progressive collapse resisting capacity of a RC frame could be significantly enhanced using unbonded strands or side plates with stud bolts.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1496-1504
• /
• 2019

This paper proposes a new THD reduction algorithm for modular multilevel converters (MMCs) with offset voltage injection operated in nearest level modulation (NLM). High voltage direct current (HVDC) is actively introduced to the grid connection of offshore wind powers, and this paper deals with a voltage generation technique with an MMC for wind power generation. In the proposed method, third harmonic voltage is added for reducing the THD. The third harmonic voltage is adjusted so that each of the pole voltage magnitudes maintains a constant value with a maximum number of (N+1) levels, where N is the number of sub-modules per arm. By using the proposed method, the THD of the output voltage is mitigated without increasing the switching frequency. In addition, the proposed method has advantageous characteristics such as simple implementation. As a part of this study, this paper compares the THD results of the conventional method and the proposed method with offset voltage injection to reduce the THD. In this paper, simulations have been carried out to verify the effectiveness of the proposed scheme, and the proposed method is implemented by a HILS (Hardware in the Loop Simulation) system. The obtained results show agreement with the simulation results. It is confirmed that the new scheme achieved the maximum level output voltage and improved the THD quality.