• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.703-708
• /
• 2004

앞선 논문 분말의 제조에서 정립한 $\alpha$-Si$_3$N$_4$ 분말의 제조를 위한 최적의 조성에서 반응 혼합물의 양에 따른 압력 및 생성물의 변화를 관찰하였다. 5L 반응기 내에서 반응 혼합물의 양이 100g일 때 필요한 최저 $N_2$ 압력은 60atm이었다. 그러나 반응 혼합물의 양이 200g 이상일 때부터 반응기 내부의 압력 증가로 인해 반응은 완료될 수 없었으며, 혼합물이 증가할수록 반응율은 직선적으로 감소하였다. 반응물의 양이 증가할수록 최초 반응기 내부의 $N_2$압력을 감소시킴으로써 반응을 완료시킬 수 있었으며, 500g일 때 초기 $N_2$ 압력을 약 20atm까지 감소시킴으로써 반응은 완료될 수 있었다. 반응이 중간에 멈추는 원인은 반응기 내부의 압력 증가로 인해 기화되지 못한 채 혼합물 안에 존재한 NH$_4$Cl때문인 것으로 밝혀졌다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.145-148
• /
• 2008

현재 항우연에서 개발 중인 우주발사체 터보펌프에 사용되는 터빈은 단단 충동터빈을 적용하고 있다. 우주발사체의 안정성을 위해 팁 간극을 비교적 많이 허용하고 있는데, 효율적인 면에서는 반동터빈 보다 다소 뒤지지만, 높은 출력비를 가지는 충동터빈이 팁 간극이 커질 때 어떤 효율경향을 나타내는지 알아보는 일은 의미 있는 일이다. 실험은 아음속 조건에서 실험하였고, 팁 간극을 각각 코드기준 1%$\sim$20%일 경우 충동과 반동 각각의 경우에 대하여 하류 전압손실을 측정하였다. 측정결과 팁 간극이 10%보다 더 커지면, 충동터빈이 오히려 전압손실량이 반동터빈보다 더 작아진다. 이것은 팁 간극이 비교적 큰 조건에서 충동터빈이 반동터빈보다 효율이나 출력비 면에서 더 나은 성능을 나타냄을 의미한다.

• 한국표면공학회지
• /
• 제26권1호
• /
• pp.3-9
• /
• 1993

Chemical vapor deposited tungsten films were formed in a cold wall reactor at pressures higher (10~120torr) than those conventionally employed (<1torr). SiH4, in addition to H2, was used as the reduction gas. The effects of pressure and reaction temperature on the deposition rate and morphology of the films were ex-amined under the above conditions. No encroachment or silicon consumption was observed in the tungsten de-posited specimens. A high deposition rate of tungsten and a good step coverage of the deposited films were ob-tained at 40~80 torr and at a temperature range of $360~380^{\circ}C$. The surface roughness and the resistivity of the deposited film increased with pressure. The deposition rate of tungsten increased with the total pressure in the reaction chamber when the pressure was below 40 torr, whereas it decreased when the total pressure ex-ceedeed 40 torr. The deposition rate also showed a maximum value at $360^{\circ}C$ regardless of the gas pressure in the chamber. The results suggest that the deposition mechanism varies with pressure and temperature, the surface reac-tion determines the overall reaction rate and (2) at higher pressures(>40 torr) or temperatures(>36$0^{\circ}C$), the rate is controlled by the dtransportation rate of reactive gas molecules. It was shown from XRD analysis that WSi2 and metastable $\beta$-W were also formed in addition to W by reactions between WF6 and SiH4.

• 패션비즈니스
• /
• 제3권1호
• /
• pp.125-137
• /
• 1999

The present study aims to reveal the sweating reaction of male adults, focused on athletes. With six subjects (3 athletes and 3 non-athletes) in two different conditions of ambient temperature (I : $25\pm1.0^{\circ}C$, II : $29.5\pm1.0^{\circ}C$), their total sweat rate, local sweat rate, skin temperature, physiological reaction (rectal temperature, blood pressure, and pulse rate), and psychological reaction (thermal, moisture, comfort, and perceptive sweat sensations) were measured. The comparison gave the following results: Total sweating rate was greater in non-athletes, while the two groups had more perspiration in ambience II. Local sweating rate in both ambiences was the greatest in the central breast area (athletes) and the infrascapular area (non-athletes). The mean skin temperature had more changes of increase and decrease in athletes. As to physiological reaction, non-athletes had lower rectal temperature and blood pressure as well as higher pulse rate. As for psychological reaction in Ambience II, the 4 sensations were mostly 'hot', 'humid', 'uncomfortable', and 'sweaty'.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1513-1518
• /
• 2002

Kinetic studies on the water-gas shift reaction catalyzed by magnetite/chromium oxide and copper/zinc oxide were carried out by using an in situ photoacoustic spectroscopic technique. The reactions were performed in a closed-circulation reactor system using a differential photoacoustic cell at total pressure of 40 Torr in the temperature range of 100 to $350^{\circ}C.$ The CO2 photoacoustic signal varying with the concentration of CO2 during the catalytic reaction was recorded as a function of time. The time-resolved photoacoustic spectra obtained for the initial reaction stage provided precise data of CO2 formation rate. The apparent activation energies determined from the initial rates were 74.7 kJ/mol for the magnetite/chromium oxide catalyst and 50.9 kJ/mol for the copper/zinc oxide catalyst. To determine the reaction orders, partial pressures of CO(g) and H2O(g) in the reaction mixture were varied at a constant total pressure of 40 Torr with N2 buffer gas. For the magnetite/chromium oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.93 and 0.18, respectively. For the copper/zinc oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.79 and 0, respectively.

• Nuclear Engineering and Technology
• /
• 제30권5호
• /
• pp.396-402
• /
• 1998

Experiments on the steamside corrosion and hydrogen pick-up of Zircaloy-4 under high pressure up to 10.3MPa are carried out to estimate the pressure effects on the kinetics. Temperature and reaction time are determined to be 37$0^{\circ}C$ and 72hours for the pre-transition test and $700^{\circ}C$ and 210minutes for the post-transition test, respectively. Results show that under 10.3MPa pressure the oxidation reaction is 50% and 100% enhanced in the pre-and the post-transition regime, respectively. Total amount of hydrogen uptake in the reaction is proportionally increased as corrosion weight gain is elevated. However, pick-up fraction is not affected by the high pressure. The fraction is almost twice greater than that in the waterside corrosion. Edges in the specimens play a certain role in the enhancement, especially in the post-transition regime. To identify physical property changes of oxide film such as micro-cracks or micro-pores, careful and thorough examination must be needed with some special techniques.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.505-510
• /
• 2000

In this investigation, we fabricated RBSN (Reaction Bonded Silicon Nitride) using the static nitriding system which could be advantageous for commercialization. Firstly, Si compacts of different sizes were made, and then nitridation rates were investigated as a function of added static gas pressure. The reaction schedule was obtained by pre-experiments. In case of small samples, the variation of ${\alpha}$, ${\beta}$ phases between the inside and the outside region of the specimens was examined after the samples were nitrided under 1 bar and 1.5 bar reaction pressure. On the other hand, large samples of Si compact with the size of 36 mm for diameter and 23 mm for thickness were nitrided for 26 hours of the total nitridation time, which showed a complete and homogeneous nitriding reaction from the outside to the inside of the samples, although the time was considerably shorter than that needed for convertional nitridation. Nitridation rates obtained at the early stage of reaction were proportional to the reaction gas pressures. The sequences of the nitridation reaction with the thickness were as follows 1) the outside, 2) the inside and 3) the intermediate area of the specimen. These results wer eobtained from the coloration of cross sectioned specimens that had various nitridation rates. Total nitriding reaction kinetics was controlled by chemical reaction, not by diffusion of the nitrogen gas.

• 대한인간공학회지
• /
• 제17권2호
• /
• pp.65-82
• /
• 1998

To investigate the difference of sweating reaction by the somato types, we measured total sweat rate, local sweat rate, skin temperature, physiological reaction and psychological reaction at $25{\pm}1^{\circ}C$ and $29{\pm}1^{\circ}C$ under laboratory conditons. Nine healthy adult females were divided into three somato types : slender (3), normal (3) and obese (3). The results were as follows ; Total sweat rate was highest in the obese type, followed by the normal and slender types in order. Local sweat rate was highest in the infrascapular area, and then came breast, the back of the hand, upper ann, anterior leg, and anterior thigh in all somato types. Mean skin temperature was highest in the slender type, and followed the normal and obese types. Rectal temperature, blood pressure and pulse rate were highest in the obese type. Psychological reaction appeared 'hot', 'humid', 'sweaty' as ambient temperature went up. Somato types made little difference in psychological reaction.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.189-195
• /
• 2007

The purpose of this study was to analyze the effects of shoes with curved out-sole on the pressure, reaction force(sum of pressure) on foot and relations between the rolling speeds and pronation of foot. The foot pressure, reaction force and pressure center on the foot surface of shoe were measured with NOVEL padar system, and 3 type shoes were used to compare the position and speed of pressure center and the foot reaction force, which were s(target) shoe with soft cushions in middle part of out-sole and curved out-sole, m shoes with two type- soft, hard, hardness out-sole and curved out-sole and n shoes with flat out-sole. The subjects were 13 female university students, had weared the 3 type shoes for 6 weeks on two-weeks shifts for adaptation before experiment and put on 3-type shoes repeatedly and randomly and walked on treadmill with 3.5km/h and 80 steps/min. The data were captured with 30Hz and readjusted with 5kgf threshold reaction force. The results can be summarized as follow. 1. There were no difference in maximum reaction force on initial contact period and total foot impact, but statistical difference in maximum reaction force on takeoff period : s, m, n in ascending order. 2. There were some difference in rolling speeds for support periods. At initial contact, the rolling speed of s shoes was fastest but at periods between first and second maximum reaction force, that of m shoes fastest. 3. There was a negative relation between rolling speeds and the length of lever arm on initial reaction force related to pronation. It seems shoes with various curved shapes and hardness could make effects on the rolling features and the rolling speed also have some relationships with walking efficiency, absortion of impact and pronation.

• 한국연소학회지
• /
• 제5권1호
• /
• pp.1-6
• /
• 2000

Surface reaction occurs at a certain surface temperature when a catalyst is heated up in a reactive mixture. If homogeneous ignition does not occur, a steady state is observed because the heat produced by the surface reaction is balanced with the heat loss caused by convection, conduction and radiation. The present paper treats the effects of pressure on the surface temperature at the steady state. Hydrogen and oxygen are used as reactants and nitrogen as an inert gas. A spherical platinum catalyst of 1.5 mm in diameter is sustained in the chamber with two wires of 0.1 mm in diameter. As results, there exists a maximum steady temperature at a certain relative hydrogen concentration which increases with total pressure. At the steady state, it can be approximated that the heat release is estimated by the mass transfer considering the effect of natural convection. The experimental results are explained qualitatively by the approximation.