• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.65-72
• /
• 1990

Comparison of acoustic emission, ultrasonic testing and crack gauge in 3-point bending testing have been studied. As the results, COD is indirectly assumed by strain gauge rate and grid pitch width when crack gauge grid is out. Acoustic emission is qualitatively able to measure crack growth by total count but ultrasonic testing has a difficulty in measuring it because of echo height fluctuation according to the change and pressure of UT. probe.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.58-63
• /
• 2009

In this paper, the power loss due to PV module mismatch in PV string is analyzed and a mismatch compensation method is proposed to improve the efficiency of PV system. The analysis of mismatch loss using PV model simulation reveals that the mismatch module may decrease the total efficiency because the MPPT function of power conditioner make the PV system operate at the local maximum point. The mismatch loss can be severe if the maximum power point current of mismatch module is less than that of string. The proposed compensation method which is simply implemented with a buck type converter shows the possibility to remove the mismatch loss. The effectiveness of the analysis and compensation method is verified by a prototype experiment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.2
• /
• pp.209-218
• /
• 2009

In a wireless sensor network(WSN) each sensor node deals with numerous sensing data elements. For the sake of energy efficiency and network lifetime, sensing data must be handled effectively. A technique used for this is data aggregation. Sending/receiving data involves numerous steps such as MAC layer control packet handshakes and route path setup, and these steps consume energy. Because these steps are involved in all data communication, the total cost increases are related to the counts of data sent/received. Therefore, many studies have proposed sending combined data, which is known as data aggregation. Very effective methods to aggregate sensing data have been suggested, but there is no means of deciding how long the sensor node should wait for aggregation. This is a very important issue, because the wait time affects the total communication cost and data reliability. There are two types of data aggregation; the data counting method and the time waiting method. However, each has weaknesses in terms of the delay. A hybrid method can be adopted to alleviate these problems. But, it cannot provide an optimal point of aggregation. In this paper, we suggest a stochastic-based data aggregation scheme, which provides the cost(in terms of communication and delay) optimal aggregation point. We present numerical analysis and results.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.2
• /
• pp.5-10
• /
• 2016

Gas flow measurement in a closed duct was performed using multi-point Pitot tubes. Measurement uncertainty was assessed for this measurement method. The method was applied for the measurement of air flow into a gas turbine engine in an altitude engine test facility. 46 Pitot tubes, 15 total temperature Kiel probes and 9 static pressure tabs were installed in the engine inlet duct of inner diameter of 264 mm. Five tests were done in an airflow range of 2~10 kg/s. The flow was compressible and the Reynolds numbers were between 450,000 and 2,220,000. The measurement uncertainty was the highest as 6.1% for the lowest flow rate, and lowest as 0.8% for the highest flow rate. This is because the difference between the total and static pressures, which is also related to the flow velocity, becomes almost zero for low flow rate cases. It was found that this measurement method can be used only when the flow velocity is relatively high, e.g., 50 m/s. Static pressure was the most influencing parameter on the flow rate measurement uncertainty. Temperature measurement uncertainty was not very important. Measurement of boundary layer was found to be important for this type of flow rate measurement method. But measurement of flow non-uniformity was not very important provided that the non-uniformity has random behavior in the duct.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.59-64
• /
• 1996

When the input-output record is available, the identification of a bilinear system is considered. It is assumed that the input is noise free and the output is contaminated by an additive noise. It is further assumed that the covariance matrix of the noise is known up to a factor of proportionality. The extended generalized total least squares (e-GTLS) method is proposed as one of the consistent estimators of the bilinear system parameters. Considering that the input is noise-free and that bilinear system equation is linear with respect to the system parameters, we extend the GTLS problem. The extended GTLS problem is reduced to an unconstrained minimization problem, and is solved by the Newton-Raphson method. We compare the GTLS method and the e-GTLS method in the point of the accuracy of the estimated system parameters.

• Industrial Engineering and Management Systems
• /
• v.9 no.2
• /
• pp.107-120
• /
• 2010

In today's uncertain economic environment, the evaluation of safety for investment alternatives is of practical importance in manufacturing companies. This paper examines a method of quantitatively evaluating profitability and risk for multiple alternatives using the total-cost unit-cost domain. The paper assumes such factors as unit sales price, sales and production volume, unit variable cost, fixed cost, and yield for each alternative. The paper incorporates the relationship between production capacity and demand, distinguishing between cases of production capacity surplus and shortage for each year over the entire planning horizon. The paper investigates the case in which the values of each factor independently move in the direction of decreasing profit each year, and clarifies the procedure of comparing safety among multiple investment alternatives on a single consolidated total-cost unit-cost domain. The difficulty of the problem lies in the method of consolidating multiple total-cost unit-cost domains into a single domain since the combination of years of capacity surplus and shortage depends upon the change values in each factor under consideration. A systematic method of evaluating profitability as well as risk is presented, and the validity of the proposed method is verified using a numerical example.

• Journal of Korean Academy of Nursing Administration
• /
• v.16 no.3
• /
• pp.286-294
• /
• 2010

Purpose: The purpose of this study was to identify the effects of nursing competency of nurses on job satisfaction and nursing performance. Method: Using a structured questionnaire, data were collected from 368 nurses. Descriptive statistics, t-test, ANOVA, Scheffe test and pearson correlation coefficient with SAS package were used for data analysis. Results: The total mean score for nursing competency was 2.65, with scores for subcategories as follows: ethical competency 2.74, personal competency 2.65, esthetical competency 2.64, and scientific competency 2.61. The mean score of total job satisfaction was 3.18 on a 5 point scale, and nursing performance was 2.97 on a 4 point scale. Total nursing competency and total subcategories of nursing competency perceived by nurses were positively related to job satisfaction and nursing performance. Conclusion: In conclusion, nursing competency of nurses influence job satisfaction and nursing performance. With these result, it is necessary to concentrate on improving nursing competency of nurses to increase job satisfaction and nursing performance.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.26-28
• /
• 2007

The motion estimation is the most important technique in the image compression of the video standards. In the case of next generation standards in the video codec as H.264, a high compression-efficiency can be also obtained by using a motion compensation. To obtain the accurate motion search, a motion estimation should be achieved up to 1/2 pixel and 1/4 pixel uiuts. To do this, the computational complexity is increased although the image compression rate is increased. Therefore, in this paper, we propose the advanced sub-pixel block matching algorithm to reduce the computational complexity by using a statistical characteristics of SAD(Sum of Absolute Difference). Generally, the probability of the minimum SAD values is high when searching point is in the distance 1 from the reference point. Thus, we reduced the searching area and then we can overcome the computational complexity problem. The main concept of proposed algorithm, which based on TSS(Three Step Search) method, first we find three minimum SAD points which is in integer distance unit, and then, in second step, the optimal point is in 1/2 pixel unit either between the most minimum SAD value point and the second minimum SAD point or between the most minimum SAD value point and the third minimum SAD point In third step, after finding the smallest SAD value between two SAD values on 1/2 pixel unit, the final optimized point is between the most minimum SAD value and the result value of the third step, in 1/2 pixel unit i.e., 1/4 pixel unit in totally. The conventional TSS method needs an eight.. search points in the sub-pixel steps in 1/2 pixel unit and also an eight search points in 1/4 pixel, to detect the optimal point. However, in proposed algorithm, only total five search points are needed. In the result. 23 % improvement of processing speed is obtained.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.153-160
• /
• 2014

While variety of cases of studies about asbestos analysis methods are released internationally, the results of Asbestos Containing Materials (ACM) according to differences in the method of the analysis is becoming an issue. In this study, homogeneity ensured ACM samples were analyzed by visual estimation method and point counting method, and the result cound be used not only to improve the reliability on asbestos analysis of the institutions and analysts but also to obtain the basic data of Polarizing Light Microscope (PLM) analysis by comparing and evaluating. Asbestos analysis were divided into qualitative and quantitative analysis method. The quantitative analysis was performed by visual estimation method and point counting method (total 400 points) of EPA 600-R-93-116 method by using PLM. Firstly, The following was the result of homogeneity of the samples by ANOVA (Analysis of variance) and the results were satisfied. The results of qualitative analysis showed that the samples were chrysotile and amosite, and about the results of quantitative analysis, asbestos concentration determined by point counting method tend to be lower than concentrations determined by visual estimation method and also, pont counting method was a little more complicated and time-consuming.

• Journal of the Korean Mathematical Society
• /
• v.57 no.5
• /
• pp.1119-1133
• /
• 2020

In this paper, we derive an upper bound for the distance from a point in the immediate basin of a root of a complex polynomial to the root itself. We establish that if z is a point in the immediate basin of a root α of a polynomial p of degree d ≥ 12, then ${\mid}z-{\alpha}{\mid}{\leq}{\frac{3}{\sqrt{d}}\(6{\sqrt{310}}/35\)^d{\mid}N_p(z)-z{\mid}$, where N_p is the Newton map induced by p. This bound leads to a new bound of the expected total number of iterations of Newton's method required to reach all roots of every polynomial p within a given precision, where p is normalized so that its roots are in the unit disk.