• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.21-34
• /
• 1988

Machinery enclosures are widely adopted to reduce the noise emission in various fields of application. Emitted noise, which is due to the vibration of enclosure's outer surface, is composed of two kinds of sound with different path of propagation. One is the "structure-borne sound", while the other is "air-borne sound". In order to get a most efficient machinery enclouser a prudent consideration upon the above structure-borne and air-borne sound is required, as the guiding principle of contermeasure for each noise is quite different. The controlling of input vibration and its isolation are major subjects for the structure-borne sound, and the specifications of absorbing members and damping panels are the major related matters for the air-borne sound. Hence, it seems very efficient to separate the total sounds into two categories with a great accuracy when one think of further reduction of noise from the existing enclosure, although its separating methods have not been made clear for many years. Author proposes an application method of experimental modal analysis to extract the structure-borne sound from the measured total radiation sound, as the air-borne sound is deduced by the vectorial difference between the measured total radiation sound and the calculated structure-borne sound. In order to calculate the correct structure-borne sound by the excitation at an arbitrary point on the enclosure structure, it is important to decide 1) how to estimate the enclosure's surface vibration velocity and 2) how to compute the radiation sound which is considered as the effect of vibration modes of enclosure surface. The former can be solved with total frequency response function calculated by the application of experimental modal analysis. The latter is to be solved by the author's new approaches for radiation sound computation by means of the Rayleigh's integral equation and the boundary-element method applied complex surface vibration velocity. As a first step, structure-borne sound by the excitation at an arbitry point on the rectangular plate with fixed edges, has been calculated to verified the reliability of the developed computation methods. The results of calculation show good agreements with those of the actual measurements.actual measurements.

• 대한공간정보학회지
• /
• 제21권4호
• /
• pp.117-123
• /
• 2013

본 연구에서는 Network RTK 측량 성과와 기존 확정성과(TS기반)에 대해 지역별 적용 정확도 분석을 통해 향후 지적재조사사업에서의 Network RTK 측량의 합리적인 적용 방안을 제시해보고자 하였다. 이를 위해 실험지역을 선정하고 총 307점에 대해 Network RTK 측량으로 성과를 취득하고 이를 확정성과와 비교한 결과 전체 연결오차의 RMSE는 ${\pm}0.1028m$로 분석되었고, 총 48점이 지적재조사 허용기준(0.07m)을 초과하는 것으로 나타났다. 연구에서는 이러한 분석결과를 종합적으로 평가한 후 향후 지적재조사사업에서의 현실적인 대안을 제시해 보았다. 즉, Network RTK와 전자평판 통합형 측량 기법의 개발 적용을 제안하였다. 그리고 최초 일필지 성과 취득은 토털스테이션측량으로 단일화를 하고, 검사측량에 Network RTK 측량을 적용하는 방법을 제안하였다.

• 한국항해학회지
• /
• 제13권3호
• /
• pp.37-44
• /
• 1989

Recently recognize the labor productivity of port physical distribution system in the port and shipping areas, Much Efforts for evaluating this productivity has been made continuously. BUt still there is little study, so far, on a systematic research for the management of port labor gangs, and even those were mainly depended on a rule of thumb. Especially the object of this study is to introduce the method of optimal allocation and assignment for the labor gangs per pier unit in the multiple ships berthed at an arbitary pier or port. In case the multiple ships have a homogeneous cargoes or do not have sufficient labor gangs to be assigned. The problem of optimal allocation and assignment of the labor gangs to be i) formalized with multi-state decision process in form of difference equation as the pattern which converted the independent multiple ships into a single ship with the intra-multiple ships, and ii) the optimal size of labor gangs could be obtained through the simple mathematical method instead of complicated dynamic programming, and iii) In case of shortage of labor gangs available the evaluation function considering the labor gangs available and total shift times was introduced, and iv) the optimal allocation and assignment of labor gangs was dealt at the point of minimizing the summation of the total shift times and at the point of minimizing the total cost charged for the extra waiting time except PHI time during port times for the multiple ships combinations.

• Corrosion Science and Technology
• /
• 제11권5호
• /
• pp.173-178
• /
• 2012

To manage the wall thinning of carbon steel piping in nuclear power plants, the utility of Korea has performed thickness inspection for some quantity of pipe components during refueling outages and determined whether repair or replacement after evaluating UT (Ultrasonic Test) data. When the existing UT data evaluation methods, such as Band, Blanket, PTP (Point to Point) Methods, are applied to a certain pipe component, unnecessary re-inspecting situations may be generated even though the component does not thinned. In those cases, economical loss caused by repeated inspection and problems of maintaining the pipe integrity followed by decreasing of newly inspected components may be generated. EPRI (Electric Power Research Institute) in USA has suggested several statistical methods, TPM (Total Point Method), LSS (Least Square Slope) Method, etc. to distinguish whether multiple inspecting components have thinned or not. This paper presents the analysis results for multiple inspecting components over three times based on both NAM (Near Area of Minimum) Method developed by KEPCO-E&C and the other methods suggested by EPRI.

• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.111-121
• /
• 2017

Verification of dose distribution is an essential part of ensuring the treatment planning system's (TPS) calculated dose will achieve the desired outcome in radiation therapy. Each measurement have uncertainty associated with it. It is desirable to reduce the measurement uncertainty. A best approach is to reduce the uncertainty associated with each step of the process to keep the total uncertainty under acceptable limits. Point dose patient specific quality assurance (QA) is recommended by American Association of Medical Physicists (AAPM) and European Society for Radiotherapy and Oncology (ESTRO) for all the complex radiation therapy treatment techniques. Relative and absolute point dose measurement methods are used to verify the TPS computed dose. Relative and absolute point dose measurement techniques have a number of steps to measure the point dose which includes chamber cross calibration, electrometer reading, chamber calibration coefficient, beam quality correction factor, reference conditions, influences quantities, machine stability, nominal calibration factor (for relative method) and absolute dose calibration of machine. Keeping these parameters in mind, the estimated relative percentage uncertainty associated with the absolute point dose measurement is 2.1% (k=1). On the other hand, the relative percentage uncertainty associated with the relative point dose verification method is estimated to 1.0% (k=1). To compare both point dose measurement methods, 13 head and neck (H&N) IMRT patients were selected. A point dose for each patient was measured with both methods. The average percentage difference between TPS computed dose and measured absolute relative point dose was 1.4% and 1% respectively. The results of this comparative study show that while choosing the relative or absolute point dose measurement technique, both techniques can produce similar results for H&N IMRT treatment plans. There is no statistically significant difference between both point dose verification methods based upon the t-test for comparing two means.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.399-402
• /
• 1999

In this paper, a new method for calculating capacitance in arbitrarily shape structure is Presented. This new approach based on divergence theorem of Gauss\`s law is acheive by Surface-Contacted Element(SCE) for Gaussian surface. To evaluate accurate capacitance value in nonuniform electric field. in two dimensional analysis the interpolation using the elements which contact one nod (PE: Point-Element) or two nod (FE: Face-Element) is employed. Because the elements contacted with surface are very small compared with total elements in analytic model, SCE method has shorter computing time to calculate capacitance. This proposed method is verified by comparing the simulated results with value obtained by analytic method.

• 한국국방경영분석학회지
• /
• 제26권1호
• /
• pp.89-99
• /
• 2000

This paper deals with a heuristic algorithm for the vehicle routing-scheduling problem to minimize the total travel distance and the total cost. Because the aim of the Clarke-Wright method, one of famous heuristic methods, is to minimize the total travel distance of vehicles, it cannot consider the cost if the cost and the travel distance is not proportional. In the Clarke-Wright method, the route of each vehicle is found by using the saving matrix which is made by an assumption that the vehicle comes back to the starting point. The problem dealt with in the paper, however, does not need the vehicle to come back because each vehicle has its hoping-start-points and hoping-destination-points. Therefore we need a different saving matrix appropriate to this occasion. We propose a method to find an initial solution by applying network simplex method after transforming the vehicle routing-scheduling problem into the minimum cost problem. Moreover, we propose a method to minimize the total travel distance by using the modified saving matrix which is appropriate to no-return occasion and the method for the case of plural types of vehicles and freights.

• The Journal of Korean Physical Therapy
• /
• 제22권1호
• /
• pp.83-90
• /
• 2010

Purpose: This study aimed to determine the degree of job stress and self-esteem of physical therapists as well as the correlation between the two variables. Method: This study targeted 218 physical therapists of Busan City, and was carried out from July 16 to August 6, 2009 as survey research. A structured questionnaire referring to advance researches was used as a research tool. Job stress symptoms were measured one a 5 point scale, the higher the point total, the higher the job stress. Self-esteem was measured on a 4 point scale, the higher the point total, the lower the self-esteem. After data collection we determined descriptive statistics, and did reliability analysis, factor analysis, Spearman's correlation analysis, and regression analysis. Results: Reliability analysis indicated that reliability for the job stress questionnaire was 0.93 and for the self-esteem was 0.83. The average job stress score of physical therapists was 1.19 points which was not high. The average self-esteem score was 1.76 points, whichwas high. It appeared that the higher the self-esteem, the lower the job stress. Also, self-esteem had an influence on psychological symptoms among job stress factors. Conclusion: Job stress and self-esteem of physical therapists are well-correlated and influence each other. Accordingly, self-esteem can be used as a variable for adjusting job stress of physical therapists.

• 한국가금학회지
• /
• 제50권4호
• /
• pp.267-272
• /
• 2023

본 연구에서는 닭진드기에 감염된 산란계 농장을 대상으로 3point 5score 현미경 모니터링 방법을 이용하여 방제 골든타임(golden time)과 충란제거제를 결합한 닭진드기 종합방제법(Integrated Pest Management; IPM)의 효과를 조사하기 위해 수행되었다. 처리구는 닭진드기에 감염된 총 8개 산란계 농장을 바탕으로 1) 닭진드기 종합방제법을 이용한 농가 그리고 2) 일반적인 닭진드기 방제법을 이용한 농가로 2가지 처리구로 구분하였다. 또한, 농가의 닭진드기 오염도는 3point 5score 현미경 모니터링 방법을 이용하여 평가하였다. 그 결과, 산란계 농장에 대한 IPM 적용의 유무에 따른 청소 및 소독 전, 후 그리고 4주부터 20주까지의 score는 유의적인 차이를 보이지 않았다(P>0.05). 하지만, 24주에는 IPM을 적용한 농가가 IPM을 적용하지 않은 농가보다 유의적으로 낮은(P<0.05) Score를 보였다. 따라서 본 연구의 결과를 바탕으로, 3point 5score 현미경 모니터링 방법으로 지속적인 모니터링과 보완과 함께 충란제거제를 포함한 IPM을 이용하여 닭진드기를 제어하는 것은 궁극적으로 목표로 하는 닭진드기의 감염률을 감소시키는 데 효과적인 것으로 판단된다.

• BMB Reports
• /
• 제29권5호
• /
• pp.442-447
• /
• 1996

Mutations in codon 12, 13 and 61 of one of the three ras genes, H-ras, K-ras and N-ras, convert these genes into active oncogenes. The presence of H-ras gene mutations have important prognostic implications in various cancers. In this study, the H-ras gene mutations were investigated by two-step PCRRFLP in patients with bladder and stomach cancer. For the control experiments, T24 and SK2 cell lines were used. In a total of 36 bladder cancer patient cases, five (13.9%) mutations were found by this method. Of these, point 12 mutations were two (5.6%) cases and point 61 mutations were three (8.3%) cases. On the other hand, H-ras mutation was not found in 29 cases of stomach cancer. The results of the mutated H-ras gene confirmed by direct sequencing analysis were correlated well with PCR analysis. From the sensitivity test, the H-ras mutation was found to have about 0.2% of mutated DNA mingled in normal DNA. In conclusion, the H-ras mutation has a higher clinical Significance in bladder cancer than stomach cancer. Moreover the two-step PCR-RFLP method is sensitive, rapid and relatively simple for clinical work in detecting H-ras point mutations.