• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.128-132
• /
• 2020

Total organic carbon (TOC) analysis equipment, which was previously used to prevent eutrophication in advance, is heavy, bulky, and expensive; therefore, so it is difficult to be carried and has been used as an experimental unit. In this study, a through-carbon analysis chip that integrates pretreatment through photocatalytic oxidation and carbon dioxide measurement using a pH indicator was investigated. Both the total carbon - inorganic carbon method and the nonpurgeable organic carbon (NPOC) measurement method require an acidification part for injecting an acid solution for inorganic carbon measurement and removal, an oxidation part for total carbon or NPOC oxidation and a measurement part for Carbon dioxide (CO₂) measurement. Among them, the measurement of oxidation and CO₂ requires physical technology. The proposed TOC analysis chip decomposed into CO₂ as a result of the oxidizing of organic carbon using a photocatalyst, and the pH indicator that was changed by the generated CO₂ was optically measured. Although the area of the sample of the oxidation part and the pH indicator of the measurement part were distinguished in an enclosed space, CO₂ was quantified by producing an oxidation part and a measurement part that shared the same air in one chip. The proposed TOC analysis chip is less expensive and smaller, cost and size are disadvantages of existing organic carbon analysis equipment, because it does not require a separate carrier gas to transport the CO₂ gas in the oxidation part to the measurement part.

• Analytical Science and Technology
• /
• v.33 no.5
• /
• pp.215-223
• /
• 2020

The objectives of the present study were to assess the oxidative stability of South Korean n-3 (omega-3 fatty acid) supplements carried out from 2018 to 2019 and evaluate the influence of product characteristics on oxidative safety. A total of 76 n-3 supplements were analysed for oxidation safety by four markers, including acid value (AV), primary oxidation (peroxide value, PV), secondary oxidation (p-anisidine value, pAV) and total oxidation value (TOTOX). Among the supplements tested, 5.3 %, 55.3 %, 28.9 % and 46.1 % exceeded the international voluntary recommended levels for AV, PV, pAV and TOTOX, respectively. Purity (%) of products, remainder of expiration date (suggested shelf life), package in press through package (PTP) and products with additives had statistically significant differences oxidation assessment levels (p < 0.05). In addition, n-3 group found in Algae oil had significantly lower AV levels than the group that did not, and product with Alaska pollack oil, had significantly higher pAV levels than without group (p < 0.05). The high oxidation status of South Korean n-3 products in the present study could not be considered a public health problem right now. However, the levels of oxidation may affect a lot the efficacy and safety of using n-3 supplements. Thus, current oxidation safety limits should be reestablished by regulatory bodies to ensure the safety and efficacy of n-3 supplements, so that the standards could be applied to the products available to consumers.

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.603-608
• /
• 2009

Novel ultra-high molecular weight polyethylene (UHMWPE)/zirconia composites were previously prepared by the in situ polymerization of ethylene using a Ti-based Ziegler-Natta catalyst supported on to the surface of zirconia, as a bearing material for artificial joints. Tribological tests revealed that a uniform dispersion of zirconia in UHMWPE markedly increased the wear resistance. The effects of zirconia content on the oxidation behavior of the ${\gamma}$-ray-treated UHMWPE/zirconia composite surfaces were examined. The oxidation index that estimates the oxidation degree as the content of total carbonyl compounds was monitored using Fourier transform infrared spectroscopy-attenuated total reflectance. The changes in the surface composition due to the oxidation were confirmed by electron spectroscopy for chemical analysis. The extent of oxidation decreased with increasing zirconia content, which was attributed to the increased crystallinity as well as the decreased polymer portion of the UHMWPE/zirconia composites.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.756-762
• /
• 2006

The objective of this study was to define the effects of various cooking and re-heating methods (pan roasting, steaming, oven grilling and micro-waving) on the cholesterol and formation of cholesterol oxidation products in beef loin during storage at $4^{\circ}C$. Raw samples showed lower total cholesterol content than cooked products sampled during storage for 6 d. The following cholesterol oxidation products (COPs) were separated by gas chromatography: $7{\beta}$-hydroxy cholesterol, $20{\alpha}$-hydroxy cholesterol, 25-hydroxy cholesterol, cholestane-$3{\beta}$, $5{\alpha}$, $6{\beta}$ triol (triol), ${\alpha}$-epoxide and 7-ketocholesterol. Total amounts of COPs/cholesterol at 0 d were 0.74, 0.63, 0.76, 1.23 and 0.83% for the raw sample, pan roasting, steaming, oven grilling and micro waving methods, respectively. After 6 d storage almost of the samples had higher content of total COPs than at 0 and 3 d; the lowest (0.55%) COPs was found in the steaming cooking and re-heating method. The highest (5.96%) of COPs was found in the pan roasting cooking and re-heating method after 6 d storage. In conclusion, the concentration of total cholesterol and cholesterol oxidation of beef loin were increased as a consequence of cooking and re-heating methods. Steaming and micro-waving methods showed the lowest of cholesterol oxidation products under refrigerated storage for 6 d. However, each cooking and re-heating method had its own distinctive cooking effects.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.336-341
• /
• 2015

The industrial-scale biological treatment of Chinese nutgall processing wastewater was conducted with a $200m^3$ expanded granular sludge bed reactor and a $900m^3$ bio-contact oxidation reactor. The temperature of the two reactors was controlled under mesophilic conditions ($32-40^{\circ}C$), through changing the proportion of the dilution water, which was composed of steam condensation water and residual circulating water. The effluent COD, gallic acid, chroma, total nitrogen, total phosphorus levels and pH of both the expanded granular sludge bed and bio-contact oxidation reactors were monitored. In addition, the redox potential in the expanded granular sludge bed was recorded. The total COD removal efficiency was 87.257% when the influent COD concentration was $14\;251{\pm}3\;148mg/L$, and the ratio of wastewater: dilution water was 1:5. The removal efficiencies of gallic acid, chroma, total nitrogen, and total phosphorus were 72.221%, 43.940%, 64.151% and 39.316%, respectively. The effluent pH increased in either the expanded granular sludge bed reactor or the bio-contact oxidation reactor during the operation. The redox potential in the expanded granular sludge bed varied between -367 mV and -435 mV. The results indicate that the combined process was suitable for treating Chinese nutgall processing wastewater.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2018

A continuous process of persulfate oxidation and citric acid washing was investigated for ex-situ remediation of complex contaminated soil containing total recoverable petroleum hydrocarbons (TRPHs) and heavy metals (Cu, Pb, and Zn). The batch experiment results showed that TRPHs could be degraded by $Fe^{2+}$ activated persulfate oxidation and that heavy metals could be removed by washing with citric acid. For efficient remediation of the complex contaminated soil, two-stage and three-stage processes were evaluated. Removal efficiency of the two-stage process (persulfate oxidation - citric acid washing) was 83% for TRPHs and 49%, 53%, 24% for Cu, Zn, and Pb, respectively. To improve the removal efficiency, a three-stage process was also tested; case A) water washing - persulfate oxidation - citirc acid washing and case B) persulfate oxidation - citric acid washing (1) - citric acid washing (2). In case A, 63% of TRPHs, 73% of Cu, 60% of Zn, and 55% of Pb were removed, while the removal efficiencies of TRPHs, Cu, Pb, and Zn were 24%, 68%, 62%, and 59% in case B, respectively. The results indicated that case A was better than case B. The three-stage process was more effective than the two-stage process for the remediation of complex-contaminated soil in therms of overall removal efficiency.

• Tribology and Lubricants
• /
• v.25 no.6
• /
• pp.432-437
• /
• 2009

The effect of oxidation in SAE 5W30 engine oils on friction and wear characteristics was investigated using reciprocating bench tester and shell 4-ball tester. Commercial engine oils were collected and oxidized using the KS M 2021 method modifying the oxidation time. Kinematic viscosity, total acid number(TAN), FT-IR spectrum and total base number(TBN) also measured to examine the chemical change of oils with oxidation. The results showed that TAN was slightly changed and Kinematic viscosity was suddenly increased during the oxidation stage. however, TBN results keep a constant slope after TBN linearly decreased with oxidation time. Spectroscopy results showed that spectrums were orderly increased at $1710cm^{-1}$ during the oxidation time. Friction test results showed that oxidation of oils formed unstable friction layers causing higher fluctuating friction. however, the wear resistance was independent of oxidized time due to the different friction characteristics by oxidation. We found several factors in relation to lubrication properties with oxidation time. This factors were Viscosity, TBN, change of FT-IR spectrum, friction coefficient using reciprocating bench tester and wear scar.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.151-155
• /
• 2008

Oxidation of low density lipoprotein (LDL) is regarded to play an important role in the development of atherosclerosis. In the present study, salad vegetables with a remarkable DPPH radical-scavenging activity were extracted with methanol, and the methanol extracts were evaluated for the inhibition of $Cu^{2+}$-induced oxidation of human LDL. Separately, the amount of total phenolics was determined colorimetrically using Folin-Ciocalteu reagent. The vegetable extracts, expressing a strong inhibition of LDL oxidation ($IC_{50}$ values, <$100\;{\mu}g/mL$), were from angelica, dandelion, mustard leaf, and water spinach, which contained relatively high level of polyphenol content. Noteworthy, a highly positive correlation was observed between inhibition of LDL oxidation and amount of total polyphenol (p<0.01). Based on these results, it is suggested that salad vegetables, especially angelica, dandelion, and mustard leaf, may be used as easily accessible sources of natural antioxidants, especially in anti-atherosclerosis.

• Journal of Korean Society on Water Environment
• /
• v.32 no.1
• /
• pp.98-107
• /
• 2016

This study examined the effects of environmental conditions and the presence of refractory organic matter on oxidation rates of total organic carbon (TOC) measurements based on high temperature combustion and ultraviolet-sulfate methods. Spectroscopic indices for prediction of oxidation rates were also explored using the UV spectra and fluorescence excitation-emission matrix (EEM) of humic acids. Furthermore, optimum TOC instrument conditions were suggested by comparing oxidation rates of a standard TOC material under various conditions. Environmental conditions included salts, reduced ions, and suspended solids. Salts had the greatest influence on oxidation rates in the UV-sulfate method. However, no effect was detected in the high temperature combustion method. The UV-sulfate method showed lower humic substance oxidation rates, refractory natural organic matter, compared to the other methods. TOC oxidation rates for the UV-sulfate method were negatively correlated with higher specific-UV absorbance, humification index, and humic-like EEM peak intensities, suggesting that these spectroscopic indices could be used to predict TOC oxidation rates. TOC signals from instruments using the UV-sulfate method increased with increasing chamber temperature and increasing UV exposure durations. Signals were more sensitive to the former condition, suggesting that chamber temperature is important for improving the TOC oxidation rates of refractory organic matter.

• KSTLE International Journal
• /
• v.2 no.1
• /
• pp.55-58
• /
• 2001

The most widely-used orthopaedic grade polymer bearing liner material, ultrahigh molecular weight polyethylene (UHMWPE), for the total joint arthroplasty degrades after gamma-irradiation sterilization through the progressive oxidation in a shelf and in vivo. Oxidative degradation makes UHMWPE brittle and leads to decrease in mechanical properties. In this study the relationship between post-gamma-irradiation aging time and wear of UHMWPE was investigated. Six retrieved polyethylene hip liners implanted for 3-16 years and then stored in air for 1.5-6.5 years until tests were used. Two types of pin-on-disk wear testing were conducted by the uni-directional repeat pass rotating and by the linear reciprocating stainless steel disks against stationary polyethylene pins under 4Mpa at 1Hz with bovine serum lubrication in ambient environment. Wear of retrieved polyethylene hip liners does not have direct correlation with in vivo or total aging time. Linear reciprocal sliding motion generated more remarkable wear than uni-directional repeat pass sliding motion. It indicates that kinematic motion affects very crucially on the wear of aged UHMWPE having brittle white band region.