• 한국의류학회지
• /
• 제44권3호
• /
• pp.452-463
• /
• 2020

This study analyzed wearing conditions to develop an optimum sports brassiere for women in their 50s. A total of 35.9% of the women exercised three times a week and 51.1% had been exercising for more than 2 years, and 58.5% exercised for 30 minutes to 1 hour each day. Regarding the question of whether women wore a sports brassiere when exercising, 54.8% of the respondents answered 'No'. 73.9% of the respondents found a sports brassiere stuffy. The most important factors in purchasing a sports brassiere were wear comfort and functionality. In particular, more exercise demanded greater functionality. When purchasing a sports brassiere, the price range was the highest for 84.3% of the respondents at less than 50,000 won, and 45.2% preferred achromatic colors. A total of 47.9% preferred the length of the sports brassiere to be about 5 cm from the bust; however, the respondents who exercised more preferred shorter length sports brassiere. A total of 57.6% of the respondents preferred the width of the shoulder strap to be 1-3 cm; however, respondents who exercised more preferred the shoulder strap to be more than 3 cm wide. Most respondents preferred the sports brassiere to have a moderate degree of compression at the front breast area.

• 한국패션뷰티학회지
• /
• 제4권3호
• /
• pp.40-44
• /
• 2006

This study is on the brassiere of reduce clothing pressure. To set the measurements of bras for women in their 20s, considering the comfortableness in wearing and tightness, this paper conducted a questionnaire survey concerning breasts and bras as well as measurements of body and contact surface pressure. As a result of comparing the discrepancies between the lower chest circumferences of the body and the bra, it was revealed that 67.0% were wearing one that was bigger than the body size. Most of them mentioned 'feeling of tightness' as a reason(60.4%), which suggests there are problems of the total length and elasticity in the process of making bras. The favorite bra types are wire type(57.9%), mold type(24.3%), and strapless type(10.4%).it is recommended that the total length of lower chest circumference be increased. The result and the recommendations of this study are as follows: First, the total length of brassiere be increased by 5cm from the current patterns in the process of manufacturing. Second, elasticity of the lower-side tapes be extended from 120% to 170%.

• 패션비즈니스
• /
• 제10권6호
• /
• pp.122-130
• /
• 2006

The purpose of this study is to develop the appropriate brassiere pattern for women. Total of 6 brands with same design and 75A, 80A size brassieres(total 12 brassieres) were compared and analyzed for pattern, cup size and patterns. SPSS 10.1 statistic process was used for data analysis. The outcom of this study is summarized as follows. Total length of brassiere by grade were performed smaller than the standard difference 5cm. For 1/2 front cover length, There were no significant differences between 75 and 80. The reason for lower line of wing is shorter than upper line of wing is because side support is cut side ways considering lower line of wing is sewn more toward front than upper line of wing. Even it is same A cup size most cup related sizes become larger according to underbust comparing with cup capacity, they range from 146.67cc to 172.83cc for same A cups. Among same A cups with difference underbust there was average of 26.16cc differences. For relations of material, sewing technology and expansion rate, all 6 brands had zigzag type sewing for upper line tape. For every 0.3cm height, there were $17{\sim}21$ stitches. When urethane mixture is similar expansion rate is higher while number of 1 inch zigzag are high. For elasticity, zigzag stitch expand side ways for more expansion.

• 복식
• /
• 제66권8호
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• 패션비즈니스
• /
• 제10권1호
• /
• pp.31-40
• /
• 2006

We studied relation between the clothing pressure applied by types of brassiere, postures, feeling of tightness. The main results were summerized as follows; 1. The research subjects of this study were 9 who rate of body fat was borderline and degree of fatness was normal. As a result of clothing pressure, the most prefered value was $36.86g/cm^2$ on sensor 2 in standing position and the next was $34.76g/cm^2$ on sitting position. Furthermore, The maximum value of sensor 2 was $59.08g/cm^2$ (in standing), $57.93g/cm^2$ (in sitting). On the other hand, The average clothing pressure of bra C type was $23.67g/cm^2$ 2. The study of feeling of tightness applied by bra type was high in order of C

• 복식문화연구
• /
• 제16권3호
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• 한국의류학회지
• /
• 제21권4호
• /
• pp.689-698
• /
• 1997

The purpose of this study is to develop the well-fitted brassieres by observing the changes in the breast sizes and shapes, the surface area and the volume of the breast through the arm movements of 3 types (0$^{\circ}$, 90$^{\circ}$ and 180$^{\circ}$) in vertical motion. The subjects are females, who are aged twenties and wearing a brassiere size 70B, In particular, to obtain the measures regarding the surface area and the volume of the breast, replicas are made at each motion. The results of this study are as follows: 1. The changes in the breast sizes and shapes at each motion By increasing the motions of the arm movement, the following measure items are inclined to decrease: Shoulder length, Side neck point~B.P., Front neck point~B.P., Horizontal length of the cup, Upper bust circumference, Bust circumference, Upper bust depth, Bust depth, Under bust depth, Nipple to tipple breadth, Horizontal distance of bust, Bust height, Cup size. By increasing the motions of the arm movement, the following measure items are inclined to increase: Center point of shoulder~B.P., Shoulder point~B.P., Armpit~ lowest point of breast drooping, Upper bust point~B.P., B.P~Under bust point, Under bust line, Width of gap between breast, Vertical distance of Bust. 2. The changes in the surface area and volume of breast at each motion By making the replica to observe changes in the surface area, which are sectioned to 4 parts(area 1 to area 4) , and volume of breast at each motion, the results are as follows: At 0$^{\circ}$ and 90$^{\circ}$, the sizes of each part are ordered as the following: area2> areal> area4> area3. At 180$^{\circ}$, the sizes of each part are ordered as the following: areal> area2> area4> area3. Through these orders, it is found that the upper and inside part of the breast has the inclination to increase so long as the motions of the arm movement increase. Also, the total surface area increases so long as the motions of the arm movement increase. The volume of the breast increase when the surface area of the breast increases. As a result of the F-test on the changes in the each surface areas, the surface area and volume by arm movements, the significant differences among the each surface areas and the surface area are not found.