• Korean Journal of Head & Neck Oncology
• /
• v.24 no.1
• /
• pp.57-63
• /
• 2008

Background and Purpose：Nausea, vomiting and weight loss are common problems that are encountered in the course of cancer patient treatment who are receiving radiotherapy. In this study, we are aiming to analyze the effect of megestrol acetate on quality of life of head and neck cancer patients receiving radiotherapy, resulting from improvement of weight loss, appetite and nutritional status via multicenter, open-labeled, observational clinical trial. Material and Methods：A total of 270 patients from 10 medical institutes who are receiving radiotherapy or who have completed radiotherapy within 3 months, between February 2007 and February 2008, were selected as candidates for the study. Megestrol acetate suspension(megace) was given to the subjectives once a week for 4 weeks with the amount of 20ml(megestrol 800mg). Measurement of weight and questionnaire surveys were carried out three times: at the start of the study, 4 weeks after the start of the medication, and 4 weeks after the end of the medication, respectively. Results：The group who has received megace had a total number of 199, and control group was 70. The group who have received megace showed mean weight loss of 1kg in 8 weeks, compared with the weight loss of 5.5kg in control group, which showed that the medication was effective in reducing the amount of weight loss(P=0.027). The group who received megace had a tendency to report a reduced rate of decrease in the score of appetite, nausea and vomiting, and QOL score, but it did not have statistical significance(P>0.05). Conclusion：Megestrol acetate have reduced the degree of weight loss significantly, and it has a tendency to reduce the rate of decrease in appetite, aggravation of nausea and vomiting, and quality of life.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• v.61 no.12
• /
• pp.697-701
• /
• 2018

Background and Objectives The aim of this study was to evaluate surgical completeness in endoscopic total thyroidectomy with central neck dissection via unilateral axillo-breast approach (UABA) compared with bilateral axillo-breast (BABA) and open approach (OA) by means of the radioactive iodine uptake (RAIU) ratio and thyroglobulin (Tg) of remnant thyroid. Subjects and Method From July 2010 to March 2013, 82 patients who had underwent total thyroidectomy with central neck dissection and postoperative radioactive iodine (RAI) ablation for papillary thyroid carcinoma were enrolled. Of these patients, 27 patients underwent UABA, 24 patients BABA, and 31 patients OA. Clinicopathologic data, surgical outcome, stimulated Tg and RAIU ratio on the first postoperative RAI ablation scan were compared among 3 groups. Results Patients in the endoscopic surgery groups (UABA, BABA) were younger than those in the OA groups. Invasiveness such as operation time, postoperative pain, and drain amount in UABA was less than that in BABA and severer than that in OA. Other variables regarding clinicopathologic and surgical data were not significantly different. Stimulated Tg and RAIU ratio did not show significant differences among 3 groups (p=0.659 and p=0.664). Conclusion The completeness of UABA was comparable with that of BABA and OA. The UABA may be a safe option for patients who need endoscopic thyroidectomy for papillary thyroid carcinoma.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.2
• /
• pp.76-79
• /
• 2014

In treatment of failure in ankle joint replacement therapy, talar avascular necrosis with massive bone defect, talus fracture with severe comminution and bone defect and ankle dislocation, treatment of large bone defects is considerably important for ankle joint stability and union, therefore, the choice of treatment for large bone defects is use of femoral head or iliac crest bone graft and rigid internal fixation. Because first generation total ankle arthroplasty performed for the first time using a cemented fixation technique requires a large amount of bone resection during re-surgery and there is some possibility of a larger bone defect after removal of implants, in cases where prosthesis for the defect is needed, performance of palliative femoral head or iliac crest bone graft and rigid internal fixation can be difficult. We report on a case of a 48-year-old woman who had experienced ankle pain for 25 years since undergoing total ankle arthroplasty. Because the patient had little ankle motion and rigid soft tissue despite a large bone defect caused by aseptic loosening, a good outcome was obtained only for the femoral cancellous bone graft using allo femoral head without internal fixation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.478-484
• /
• 2004

On 11 June 1991, eggs from the brood stock of small yellow croaker (Larimichthys polyactis) were artificially fertilized using the standard dry method and were hatched. Each of the fertilized eggs (1.1-1.2 mm in diameter) had an oil globule and was transparent and buoyant. The fertilized eggs hatched in a range of water temperatures $(17.5-20.3^{\circ}C)$ 44 hrs after fertilization. The total lengths of the newly hatched larvae were 3.1-3.3 mm, and these hatchlings had 31 myotomes (10+21). Melanophores and yellow-brown chromatophores were concentrated on the head, at the ventral part of the yolk, and in the middle of the tail. Four days after hatching, the larvae completely absorbed the yolk and became flexions of 5.1-5.5 mm in total length. Fifteen days after hatching, one spine (the anterior tip of the maxillary) appeared in the upper jaw and three spines developed at the upper parts of the eyes and on the posterior part of the head. At this stage, the larvae were approximately 8.3 mm long. Thirty-nine days after hatching, juveniles (1.9-3.4 mm in total length) had a pointed tail fin. By 66 days after hatching, the juvenile fish (about 4.0-6.5 mm in total length) were similar to adult fish in body shape. The larvae of L. polyactis could be distinguished from those of L. croacea by two distinct characteristics: the large number of vertebrae (28-29), and a relatively small bony ridge on the occipital region of the head.

• Journal of Korean Society on Water Environment
• /
• v.31 no.3
• /
• pp.235-240
• /
• 2015

To evaluate the unit load generation and discharge, pig cage test was conducted. Feed intake, drink amount, and urine generation increased growth stage (heavy weight) of the pig more great. However, the sum of the urine and manure did not show a significant difference in the growth stages of pigs. Because of the limit of the experiment, e.g., research period, high pigpen temperature, breed-related stress and etc., it could not be derived the results of the four seasons. Therefore, in order to generalize the results, the feed intakes were calibrated using a NRC (National Research and nutritional requirements of pigs from the Commission) standards. The finalized unit load generation and generation amounts of manure and urine were estimated at BOD 104.1 g/head/d, T-N 21.2 g/head/d, T-P 4.9 g/head/d, manure 0.96 L/d, urine 1.66 L/d with consideration of revised feed intake. Compare to the former research results of MOE (Ministry of Environment, 1999) and NIAS (National Institute of Animal Science, 2008), the generation amounts of manure and urine were similar to the NIAS's values. In case of unit load generation, BOD and T-N were almost similar in all of them. However, the T-P unit load generation of MOE was more difference, e.g., 2.5 times high, compare to this study.

• Korean Journal of Organic Agriculture
• /
• v.10 no.4
• /
• pp.37-45
• /
• 2002

This study was conduction to investigate the effects of natural materials such as $GB_{10}$ chitofarm, chaff charcoal, and chaff charcoal sap, on quality and yield of chinese cabbage, Natural materials were treated on seeds soil, and leaves. The total plant weight, head weight, head length, head width, leaf length, leaf width, and sugar content of chinese cabbage in treatment with natural materials showed significant difference compared with control. The yield of chinese cabbage in $GB_{10}$ soil treatment and 1% $GB_{10}$ leaf treatment was increased 53% compared with control. The total nitrogen $P_2O_5$, $K_2O$, CaO, MgO, $Na_2O$, and Mn in total plant were analyzed. The chemical components were increased in total plant of chinese cabbage treated with natural materials compared with control natural materials increased the quality of chinese cabbage.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Korean Journal of Bronchoesophagology
• /
• v.5 no.2
• /
• pp.130-137
• /
• 1999

Background and Objectives : Provox, a recently developed tracheoesophageal prosthesis, had been widely used for voice rehabilitation after total laryngectomy for its low resistance and easiness of speech ability. But, long-term use of Provox resulted in many complications and resulted in cessation of Provox as a primary method of vocal rehabilitation. The aim of this study is to report Provox-related problems and the long-term results of Provox voice prosthesis. Materials and Methods : Medical records from patients who had undergone total laryngectomy with Provox insertion at seoul National University Hospital between January 1993 and December 1998 were reviewed retrospectively. Results : 36 patients had used 79 Provox voice prostheses during the observed period. The most common complication causing prosthesis change or removal was leakage and/or aspiration, followed by granulation formation, crusting and/or obstruction, and non-function. Median in situ lifetime of Provox was 274 days and 1-year-in situ rate was 31.0% Among 36 patients, 17 patients had undergone tracheoesophageal shunt closure at the last follow-up visit. 10 patients had complications but got along without further treatments, and 1 patient changed to Blom-Singer voice prosthesis. Only 8 patients experienced no complication, and 5 out of whom had several times of Provox change. Conclusion : long-term use of Provox resulted in discontinuation of its use due to complications in many cases. A better voice prosthesis with lower complication rate and longer in situ lifetime is needed.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.93-96
• /
• 2006

The total length, head length, head height, eye diameter, retina thickness, and lens diameter of the dotted gizzard shad, Konosirus punctatus, showed positive allometric relationships between hatching and 30 days post-hatching (dph). The increase in total length relative to head length and head height, head length growth relative to eye and lens diameter, head height growth relative to eye diameter and lens diameter, and thickness of the retina relative to eye diameter, lens diameter, head length, and head height were showed allometric relationships. The eyes were formed completely at 9 dph. At this age, the eye has a lens, an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, a rod and cone layer, and an epithelial layer. The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.