• 대한예방한의학회지
• /
• 제18권3호
• /
• pp.23-39
• /
• 2014

Objective : This review aims at analyzing Complementary and Alternative Medicine (CAM) therapies, using for oral health to know current use of CAM in dental area by analyzing randomized controlled clinical trials (RCTs). Method : We searched the following 6 electronic databases until 1 July 2014. : Pubmed, Medline, Embase, Allied and Complementary Medicine Database(AMED), Cumulative Index to Nursing and Allied Health Literature(CINAHL), the Cochrane Library. We included parallel RCTs and cross-over RCTs that assessed the efficacy of CAM regardless of blinding and language. Results : A total of 154 RCT articles were included. There were 2-arm parallel study design(69.5%), 3-arm parallel study design(20.8%), 4-arm parallel study design(4.5%) and Cross-over design(5.2%). Complementary and alternative medicine RCTs in oral health tend to increase in the early-2000s and in the mid-2010s. In addition, 154 citations were classified according to diseases and interventions that categorized Natural Products studies(68.2%), Mind and Body Practices studies(31.8%). We classified in detail that vitamin and mineral therapies(29.9%), dietary supplements(24.7%), acupuncture(23.3%), Herbal medicine(13.6%), homeopathy (2.6%), energy therapies(2.6%), Massage(1.9%), biofeedback(0.6%), traditional medicine(0.6%). Conclusion : Increasing publications and diverse interventions regarding CAM for oral health is observed by analyzing RCTs from the literature review. Further studies are needed to be performed as systematic reviews to verify their effectiveness and the research to inquire into side effect.

• The Journal of Advanced Prosthodontics
• /
• 제4권4호
• /
• pp.248-253
• /
• 2012

Maxillary obturator prosthesis is the most frequent treatment option for management of partial or total maxillectomy. Heavy weight of the obturators is often a dislocating factor. Hollowing the prosthesis to reduce its weight is the well established fact. The alternate technique to hollow-out the prosthesis has been described in this article which is a variation of previously described processing techniques. A pre-shaped wax-bolus was incorporated inside the flasks during packing of the heat-polymerized acrylic resin to automatically create the hollow space. The processing technique described is a single step flasking procedure to construct a closed-hollow-obturator prosthesis as a single unit. To best understand the technique, this article describes management of a patient who had undergone partial maxillectomy secondary to squamous cell carcinoma rehabilitated with a hollow-obturator prosthesis.

• 구강회복응용과학지
• /
• 제31권4호
• /
• pp.310-315
• /
• 2015

목적: 본 연구는 토크 게이지를 이용하여, 치과 기공사들이 임플란트 기공을 진행할 때 가하는 토크의 양을 측정해 분석하고, 이러한 결과가 보철물에 어떠한 결과를 미치는 알아보기 위함이다. 연구 재료 및 방법: 치과 기공사들이 임플란트 기공시 임플란트 나사에 가하는 토크를 디지털 토크 게이지를 이용하여 측정한다. 이후 기성지대주와 analog를 이용하여, 제조사의 권장 토크로 조였을 때의 길이를 통계학적으로 비교 분석하였다. 결과: 치과 기공사들의 임플란트 기공시 평균 토크는 $1.563{\pm}0.332Ncm$로 나타났으며, 제조사의 권장토크 값으로 조였을 때와 비교하면, 외부연결형의 침하량 차이는 없으나, 내부연결형의 침하량의 차이는 통계적으로 유의한 차이를 보였다(P < 0.05). 결론: 치과기공실에서도 제조사의 권장토크를 이용하여 보철물 기공작업을 시행하고, 정확한 토크 게이지의 사용법을 익히면, 기공오차에 따른 임플란트의 부적합을 어느 정도 해소할 수 있을 것이라 사료된다.

• Physical Therapy Rehabilitation Science
• /
• 제10권4호
• /
• pp.438-443
• /
• 2021

Objective: The purpose of this study was to determine the effect of the difference in mask filters on the respiration rate of healthy people. Design: A randomized cross-over design. Methods: A total of 15 subjects were selected for this study (n=15). After filling out the Physical Activity Readiness Questionnaire, the selected participants abstained from caffeinated beverages and meals 30 minutes before and sat in a chair 10 minutes before stabilizing their breathing. Afterwards, the lung function test was performed 3 times for each mask, and the maximum value was used. The provided masks were Mask Free, Dental Mask, KF80, and KF94. Exhalation was measured for 6 seconds for each mask, and breathing was stabilized by repeating inhalation and exhalation until the next time. Results: In this study, the difference in respiratory function according to the mask type was statistically significant except for FEV1 and FVC (p<0.05). As a result of post-hoc analysis, FVC, FEV1, PEF, and FEF values were significantly lower than those of the control group not wearing a mask (p<0.05). When wearing KF94, FVC, FEV1, PEF25-25%, and FEF were significantly lower than when wearing a dental mask (p<0.05). When wearing a KF80 mask, it was significantly lower in FVC and FEV1 than when wearing a dental mask (p<0.05). In FEV1/FVC, the difference by mask type was not statistically significant (p<0.05), but it was lower than the spirometry standard of COPD patients (FEV1/FVC<0.7). Conclusions: As Now that wearing a mask is essential, it has been confirmed that the mask affects the respiratory rate.Therefore, in the case of healthy adults, it is recommended to rest after wearing a mask if attention deficit or headache occurs. People with low breathing capacity are recommended to have low-intensity activities and frequent rest periods after wearing a mask.

• 구강회복응용과학지
• /
• 제17권3호
• /
• pp.205-211
• /
• 2001

The aim of this investigation was to evaluate successfully functioning implants stability in the partially edentulous mandibular molar sites by resonance frequency measurements. Resonance frequency measurement is more objective and clinically non-invasive method than any other methods had been used. In this study, $Osstell^{TM}$ (Integration Diagnostics, Sweden) was used. 15 patients ( 7 males, 8 females ) were received each 2 implants in their mandibular unilaterally partial edentulous molar sites. Total 30 implants were installed, 28 implants were $Br{\aa}nemark^{(R)}$ self-tapping fixtures(MK II, Nobel Biocare, Sweden) and 2 were $3i^{(R)}$(USA) self-tapping fixtures. Minimum of functional loading durations was 12 months and there were no significant marginal bone resorptions and peri-implant problems. From this test, the following results were drawn: 1. Mean ISQ values of implants in the first and second mandibular molar area were $73.66{\pm}4.45$, $71.93{\pm}3.41$, respectively. There was no significant difference between two groups(p>0.05). Also mean ISQ value of total sum was 72.8. 2. Mean ISQ values of implants in males and females group were $71.64{\pm}4.06$, $73.81{\pm}3.76$, respectively. And there was no significant difference between two group(p>0.05). 3. Correlation between implant lengths and ISQ values was weak(r=0.128).

• 치위생과학회지
• /
• 제16권2호
• /
• pp.127-133
• /
• 2016

이번 연구는 영남대학교의료원 재활병동에 입원 중인 뇌졸중 환자 78명을 대상으로 구강위생 및 건강, 구강건강관련 삶의 질을 검사하였으며 다음과 같은 결과를 얻었다. Gingival index는 3명(3.8%)의 대상자만이 정상소견에 해당하는 code 0의 상태를 보였으며 이외 대다수의 대상자는 치은의 출혈 소견을 의미하는 code 2 이상의 수치를 보였다. CPI code의 경우에는 42명(53.8%)의 대상자가 중등도 치주염 및 중증의 치주염을 의미하는 code 3 또는 4의 상태를 보였다. CPI에 따라 대상자를 분류한 결과 치주염이 심한 그룹이 그렇지 않은 그룹에 비해 교육수준이 낮고 흡연경험이 있었으며 잔사, 치석 지수 및 치은 건강이 유의하게 불량하였다. 구강건강관련 삶의 질은 일상생활수행도 및 인지능력과 유의한 상관관계를 보였다(p<0.05). 이상의 결과를 종합해볼 때 재활병동에 입원 중인 뇌졸중 환자의 구강위생 상태는 개선할 필요가 있으며 이를 바탕으로 뇌졸중 환자의 구강건강의 악화를 방지하며 나아가 환자의 전신적 회복에 기여할 수 있을 것이다.

• 구강회복응용과학지
• /
• 제34권1호
• /
• pp.46-55
• /
• 2018

치조골의 흡수와 치주조직의 염증을 동반한 심한 치주질환 환자에서 임플란트를 통한 구강 회복은 임상적으로 어려움이 있다. 하지만 골 형태에 따른 적절한 임플란트 식립 위치를 선정한다면 불필요한 골 이식이나 연조직 수술을 최소로 할 수 있다. 최근에는 cone beam CT 촬영과 소프트웨어를 이용하여 환자의 해부학적 형태와 보철적인 위치를 고려하여 임플란트 식립 위치를 선정할 수 있게 되었고 3D printing 기술을 통해 제작된 surgical guide를 통해 계획된 위치로 정확한 수술이 가능하게 되었다. 본 증례는 70세 여성 환자로 심한 치주질환으로 인해 전악 치아의 발치가 필요하였으며 임플란트 지지 고정성 보철물로 전악 구강회복을 시행하였다. 수술 시에는 보철적인 위치를 고려한 surgical guide를 이용해 flapless 방식으로 임플란트를 식립하였고 수술 전에 CAD/CAM 방식으로 제작된 임시보철물을 즉시 부하하였다. 이후 맞춤형 지대주와 지르코니아를 이용한 보철물을 제작하였으며, 만족스러운 심미 및 기능 회복을 보였기에 보고하는 바이다.

• 대한치과의사협회지
• /
• 제47권1호
• /
• pp.31-42
• /
• 2009

This study was conducted to investigate the effects of the public dentist's professional education for 81 dentists employed at the public health centers and dental clinics in the National hospitals. The purpose of this education was to improve public dentist's abilities to perform their duties. The 3days education was from 28 May until 30 May in 2008. The total 81 participants consisted of 8 medical position dentists, 20 employment position dentists, and 53 public health dentists. The survey provided appraisal of the education and suggestion of the development after this education. The obtained results were as followings : l. The public dental health project for the disabled people(91.4%) was a top priority. The second rank was the public dental health education project (87.6%) and the public dental health project for the aged people(86.4%) was followed. 2. The participants agreed that public dentist's professional educational programs were necessary(87.6%). 3. The participants did not have difficulties in attending this education(56.8%). 4. The participants who participated in 2008 public dentists' professional education were satisfied with this educational programs(81.4%). 5. Not only did the public dentists need the preventive dentistry programs and the treatment of the disabled people but also needed the health administrative programs and the health statistical programs in the future.

• Imaging Science in Dentistry
• /
• 제51권3호
• /
• pp.251-260
• /
• 2021

Purpose: Dental implants are widely used for the rehabilitation of edentulous sites. This study investigated the occurrence of dental implant malpositioning as shown on post-implantation cone-beam computed tomography (CBCT) and to identify related factors. Materials and Methods: Samples with at least 1 malpositioned dental implant were collected from a central radiology clinic in Tehran, Iran from January 2017 to January 2019. Variables such as demographic characteristics, length and diameter of implants, type of implant, sites of implant insertion, different types of implant malpositioning problems (cortical plate perforation, interference with anatomical structures), angulation of the implant, and the severity of malpositioning were assessed. In addition, the incidence of implant fracture and over-drilling was evaluated. Data were statistically analyzed using the chi-square test, 1-sample t-test, and Spearman correlation coefficients. Results: In total, 252 patients referred for implant postoperative CBCT evaluations were assessed. The cases of implant malpositioning included perforation of the buccal cortical plate (19.4%), perforation of the lingual cortical plate (14.3%), implant proximity to an adjacent implant (19.0%), implant proximity to an adjacent tooth (3.2%), interference with anatomical structures(maxillary sinus: 18.3%, mandibular canal: 11.1%, nasal cavity: 6.3%, mental foramen: 5.6%, and incisive canal: 0.4%). Implant fracture and over-drilling were found in 1.6% and 0.8% of cases, respectively. Severity was categorized as mild (9.5%), moderate (35.7%), severe (37.7%), and extreme (17.1%), and 52.4% of implants had inappropriate angulation. Conclusion: CBCT imaging is recommended for detecting dental implant malpositioning. The most common and severe type of malpositioning was buccal cortex perforation.

• The Journal of Advanced Prosthodontics
• /
• 제8권1호
• /
• pp.21-29
• /
• 2016

This in vitro study investigated and compared the durability and retention of three types of attachments. MATERIALS AND METHODS. Three commercially available attachments were investigated: $Clix^{(R)}$, Dalbo-$Plus^{(R)}$ and $Locator^{(R)}$. In total, 72 samples of these attachments were placed in the acrylic resin forms and subjected to mechanical testing (5400 cycles of insertion and removal) over the respective ball or Locator abutments immersed in artificial saliva at pH 7 and $37^{\circ}C$. The abutments were placed at angulations of $0^{\circ}$, $10^{\circ}$ and $20^{\circ}$. The retention force was recorded at the beginning and after 540, 1080, 2160, 3240, 4320 and 5400 insertion-removal cycles. RESULTS. The results revealed that there were significant differences in the average values of the insertion/removal force due to angulation ($F_{(2.48)}=343619$, P<.05) and the type of attachment ($F_{(7.48)}=23.220$, P<.05). CONCLUSION. Greater angulation of the abutments was found to influence the retention capacity of the attachments, and the fatigue test simulating 5 years of denture insertion and removal did not produce wear in the metal abutments.