• Fisheries and Aquatic Sciences
• /
• 제11권3호
• /
• pp.140-148
• /
• 2008

We compared the quality and quantity of volatile components in salt-dried croakers prepared by different methods and obtained from different locations. In total, 110 compounds were found among regular- and delay-type salt-dried croakers purchased from two locations in Hong Kong. The major chemical classes included miscellaneous compounds(17), pyrazines(16), alcohols(15), and sulfur-containing compounds(13). Fish obtained in different locations but prepared by the same method differed only slightly in the number of identified compounds. In general, fish prepared by the delay method had a larger number of compounds compared to fish prepared by the regular method. Further, a greater number and higher levels of compounds were found in the fish obtained from one of the two locations. Overall, the delay preparation method resulted in a greater number of compounds with stronger intensity compared to the regular method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.141-145
• /
• 2014

A minimally appropriate time delay of audio data processing is investigated for rendering virtual sound source direction in real-time head-tracking environment under headphone listening. Less than 3.7 degree of angular mismatch should be maintained in order to keep desired sound source directions in virtually fixed while listeners are rotating their head in a horizontal plane. The angular mismatch is proportional to speed of head rotation and data processing delay. For 20 degree/s head rotation, which is a relatively slow head-movement case, less than total of 63ms data processing delay should be considered.

• The Korean Journal of Pain
• /
• 제22권2호
• /
• pp.176-180
• /
• 2009

Cases of pyogenic spondylodiscitis are relatively rare diseases that concern 2-7% of total cases of osteomyelitis. Owing to the low frequency and initial nonspecific nature of signs and symptoms, diagnosis is often delayed up to 2-6 months. If the proper treatment is not established due to a diagnostic delay, there is a possibility of a serious neurologic deficit and spinal instability. We report two cases of infectious spondylodiscitis which were misdiagnosed as compression fracture and spinal stenosis respectively. They could be correctly diagnosed after MRI and laboratory test and under the recovery state after an antifungal and antibiotic medication. Special careful attention during the diagnostic procedure is a really important step considering the diagnostic delay and its resultant unsatisfactory outcome.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.254-259
• /
• 1987

This paper describes the CMOS standard cell library implemented in double metal single poly gate process with 3\ulcornerm design rule, and its results of testing. This standard cell library contains total 33 cells of random logic gates, flip-flop gates and input/output buffers. All of cell was made to have the equal height of 98\ulcornerm, and width in multiple constant grid of 9 \ulcornerm. For cell data base, the electric characteristics of each cell is investigated and delay is characterized in terms of fanout. As the testing results of Ring Oscillator among the cell library, the average delay time for Inverter is 1.05 (ns), and the delay time due to channel routing metal is 0.65(ps)per unit length.

• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.56-64
• /
• 2024

In response to the current situation where general methods cannot effectively compensate for the phase delay of ordinary optical mixers, a multi-layer spatial beam-splitting optical mixer is designed using total reflection triangular prisms and polarization beam splittings. The phase delay is generated by the wave plate, and the mixer can use the existing parallel plates in the structure to individually compensate for the phase of the four output beams. A mixer model is established based on the structure, and the influence of the position and orientation of the optical components on the phase delay is analyzed. The feasibility of the phase compensation method is simulated and analyzed. The results show that the mixer can effectively compensate for the four outputs of the optical mixer over a wide range. The mixer has a compact structure, good performance, and significant advantages in phase error control, production, and tuning, making it suitable for free-space coherent optical communication systems.

• 대한교통학회지
• /
• 제26권2호
• /
• pp.47-56
• /
• 2008

2차로도로는 우리나라 포장도로의 80% 이상을 차지하고 있기 때문에 2차로도로가 국내의 교통흐름에 있어서 차지하고 있는 비중은 매우 높다할 수 있다. 그러나 2차로도로는 진행방향당 한 차로만이 허용되어 있어 저속차량에 의해 지체가 발생할 경우 고속차량이 대향차로를 이용하여 추월해야 한다. 이러한 추월은 교통사고를 유발할 가능성이 매우 높으며 추월에 의한 사고는 중앙선 침범에 의한 정면 충돌사고를 일으킬 수 있으므로 사고의 심각도 또한 매우 높다할 수 있다. 그러나 2차로도로의 전반적인 운영상태 등을 나타내는 서비스수준에 대하여 현행 KHCM 에서는 '서비스수준이란 통행속도, 통행시간, 통행자유도, 안락감 그리고 교통안전 등 도로의 운행상태를 설명'하는 개념으로 정의하고 있지만 실제 서비스수준을 산정함에 있어서 서비스수준의 개념에 나타나 있는 바와는 달리 총지체율만을 이용하여 서비스수준을 산정하기 때문에 지체만을 고려하고 사고(교통안전)를 고려하지 않고 있다. 따라서 본 연구에서는 기존의 서비스수준 산정방법인 총지체율을 이용하여 지체시간을 산정하는 방법을 제시한 후, 여기에 지체비용을 곱하는 방식으로 총지체비용을 산출하는 방법을 제시하며 사고를 고려하기 위해 교통사고예측모형을 통하여 교통사고건수를 예측하고 여기에 평균교통사고비용을 곱하는 방식으로 총교통사고비용을 산출하는 방법을 제시한다. 마지막으로 앞에서 산출된 총지체비용과 총사고비용을 합산하여 운영비용을 산출함으로써 지체와 사고를 고려한 서비스수준의 새로운 판정척도를 개발하고 더불어 서비스수준을 제시하였다.

• 한국식생활문화학회지
• /
• 제8권1호
• /
• pp.55-62
• /
• 1993

These studies were conducted to: a) investigate work patterns and productivity indices, b) rate performance levels of employees and c) determine the suggested levels of personnel and labor hours for the effective labor control in school foodservice. Eighteen elementary school foodservices in Seoul were selected in order to analyze work patterns by the work sampling methodology. Allowance time and performance rating by VTR observation was done to determine the standardized labor hours. The results were as follows. The average percentage of each work function of the total work functions such as direct work function, indirect work function and delay were 65.57%, 8.12%, 26.31% respectively. The productivity index is 0.92 min/meal. The average working and delay hours per week of the foodservice director, foodservice employees and supply person were 33.64 hours, 23.25 hours, 38.52 hours respectively. The percentage of delay hours of total labor hours for foodservice employees and supply person were 42.27% and 24.0%. The standardized work hours and the appropriate levels of foodservice employees of 17 elementary school foodservices were examined: The average rating of the foodservice employees work was 1.19 and British Insulated Calendarer Cables (BICC) allowance rate was 19.40% on the average. The total work hours of foodservice employees were 172.64 hours per week and levels of personnel were 4.53 persons. BICC allowance rate was applied: The standardized work hours per week was 180.95 hours and appropriate levels of personnel were 4.11 persons based on legal 44 working hours.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.134-142
• /
• 2010

A comparative study on the trade-off between the drive current and the total gate capacitance in double-gate (DG) and triple-gate (TG) FinFETs is performed by using 3-D device simulation. As the first result, we found that the optimum ratio of the hardmask oxide thickness ($T_{mask}$) to the sidewall oxide thickness ($T_{ox}$) is $T_{mask}/T_{ox}$=10/2 nm for the minimum logic delay ($\tau$) while $T_{mask}/T_{ox}$=5/1~2 nm for the maximum intrinsic gate capacitance coupling ratio (ICR) with the fixed channel length ($L_G$) and the fin width ($W_{fin}$) under the short channel effect criterion. It means that the TG FinFET is not under the optimal condition in terms of the circuit performance. Second, under optimized $T_{mask}/T_{ox}$, the propagation delay ($\tau$) decreases with the increasing fin height $H_{fin}$. It means that the FinFET-based logic circuit operation goes into the drive current-dominant regime rather than the input gate load capacitance-dominant regime as $H_{fin}$ increases. In the end, the sensitivity of $\Delta\tau/{\Delta}H_{fin}$ or ${{\Delta}I_{ON}}'/{\Delta}H_{fin}$ decreases as $L_G/W_{fin}$ is scaled-down. However, $W_{fin}$ should be carefully designed especially in circuits that are strongly influenced by the self-capacitance or a physical layout because the scaling of $W_{fin}$ is followed by the increase of the self-capacitance portion in the total load capacitance.

• 정보처리학회논문지C
• /
• 제12C권3호
• /
• pp.409-418
• /
• 2005

본 논문은 이동 IPv6 환경에서 지역성에 기반한 효율적인 멀티캐스트 전송 방식을 제안한다. 본 논문은 멀티캐스트 그룹에 가입하는 전체 횟수를 줄이기 위해 이동 노드의 반복적인 이동 성향을 이용한다. 이동 노드의 이동 성향을 이용하여 지역성 범위를 정의한다. 외부 네트워크는 지역성 범위에 속하는 동안 멀티캐스트 트리를 계속 유지하게 된다. 이동 노드가 일정 시간 후에 지역성 범위에 포함된 외부 네트워크로 돌아왔을 때, 이동 노드는 멀티캐스트 그룹에 가입 절차로 인한 지연 없이 멀티캐스트 서비스를 받을 수 있다. 본 논문은 비용 분석을 위해 이산분석 모델을 이용하여 산출된 전체 처리 시간과 서비스 지연 시간을 기반으로 제안한 방식과 기존의 방식을 비교한다. 분석 결과는 제안한 방식이 전체 처리 시간과 서비스 지연시간을 효과적으로 줄일 수 있음을 보여준다.

• 한국전자파학회논문지
• /
• 제21권6호
• /
• pp.681-689
• /
• 2010

본 논문에서는 분산 소자 형태의 마이너스 군지연 회로를 이용함으로써 피드포워드 증폭기의 효율 개선 및 구현의 용이성을 증대시킬 수 있는 새로운 구조의 피드포워드 증폭기를 제안한다. 피드포워드 증폭기의 지연 소자에 의한 삽입 손실은 심각한 시스템의 효율 저하를 유발한다. 일반적으로 이러한 손실을 줄이기 위하여 고출력 동축 케이블 또는 지연 선로 여파기를 사용하지만, 그러한 소자들의 삽입 손실조차도 무시할 수 없어서 피드포워드 증폭기의 제약 사항으로 작용한다. 제안하는 마이너스 군지연 회로를 이용함으로써 광대역 선형화를 위해 혼변조 왜곡 신호 상쇄 루프에 사용되는 지연 소자를 제거할 수 있다. 중심 주파수가 2.14 GHz인 WCDMA 하향 대역에서 -9 ns의 군지연, 0.2 dB의 삽입 손실, 그리고 30 MHz의 대역폭을 갖도록 제작된 2단 분산 소자 마이너스 군지연 회로를 이용하여 제작된 제안하는 구조의 피드포워드 증폭기는 평균 출력 전력이 44 dBm 일 때 -53.2 dBc의 인접 채널 누설비(Adjacent Channel Leakage Ratio: ACLR)를, 19.4 %의 전력 부가 효율(Power Added Efficiency: PAE)을 갖는 것으로 측정되었다.