• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.104-113
• /
• 2012

A set of candela distribution curves(CDCs) were generated for a fiber optic dish daylighting system by Photopia under clear sky conditions at different solar altitudes. The candela distribution curves were then exported to Radiance for photometric analysis of a windowless lecture room. Observations were made on the Radiance rendered illuminance images, which provided photo realistic scenes varying with solar altitudes. If no tracking error were assumed, the daylight collection efficiency of the system remained at a constant value of 68.4% during its operation. Higher the solar altitude angle, greater in photometric quantities were observed, which are represented by candela(cd) and total lumens(lm). In all cases considered, however, the angle of light distribution remained fixed reflecting the solar tracking feature of the system. The illuminance uniformity on the workplane lingered around 0.12, which is quite low. This is quite a contrast to its average value of 0.68 of the $2.7m^2$ area directly below the terminal device (diffuser) of the system. The maximum illuminance of 1,340lux was obtained at a solar altitude of 80 degrees.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.12
• /
• pp.1869-1873
• /
• 2008

An isolate from holothurians was identified as an eicosapentaenoic acid (EPA)-producing bacterium KMG427, which is characterized by EPA synthesis efficiency, by thin layer and gas chromatographic analyses. The EPA production was maximized to more than 10% of the total fatty acids by incubation at $4^{\circ}C$ after cell proliferation at $20^{\circ}C$. The isolated bacterium was categorized as Gram-negative, rod-shaped, aerobic, and motile with a single polar flagellum. According to phylogenetic analysis based on morphological and physiological specificities as an EPA-producing bacterium, the isolate KMG427 was found to belong to the genus Shewanella. The 16S rDNA of KMG427 was revealed to have 100% of sequence identity to that of S. hanedai CIP $103207^T$. Therefore, the isolate might be classified and identified as Shewanella sp. KMG427.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.71-86
• /
• 2008

Purpose : This study was to examine the influence of job stress of 119 Emergency Medical Technician on fatigue and job satisfaction. Methods : Subjects of this study were 228 Emergency Medical Technicians who worked at 119 Safety Center of total 92 fire stations in 12 cities of Gyeonggido including U, N, H, B, A, S, Y, G, G, G, P and I and the period of data collection was from July 11 to Sep. 10, 2007. Collected data were analyzed with SPSS 14.0 version. Results : Conclusions of this study were as follows. 1) Factor related to organization among job stress factors had the greatest influence on fatigue (B = 0.334, p < 0.01), followed by crisis situation factor (B = 0.2042, p < 0.01), inappropriate treatment factor (B = 0.174, p < 0.05), role conflict factor as special job (B = 0.109, p < 0.05) and professional knowledge and technique factor (B = 0.109, p < 0.05), and the influence of job stress factors on fatigue was explained as $R^2=0.340$. 2) Mental burden factor of job stress factors had the greatest influence on job satisfaction (B = -0.606, p < 0.01), followed by organization factor (B = -0.473, p < 0.01) and interpersonal relation and conflict factor (B = -0.339, p < 0.01), and the influence of job stress factor on fatigue was explained as $R^2=0.308$. Conclusions : Job stress of 119 rescuer is increasing continuously and such an accumulated stress lowers the job efficiency. In order to reduce, job stress, it is important to extend(${\rightarrow}$ have) proper self-development, maintain close relationships and mutual correlations among members of organization in personal dimension and to solve the role conflicts, define the organizational roles and simplify excessive job description into concrete work.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.73-84
• /
• 2020

Purpose: Though Korean healthcare services have been upgraded, infection and fire had been broken out in general hospitals. And higher concerns about quality assessment made it to clinical laboratory design guideline studies. So, this study investigates the facilities, equipment and personnel of laboratory medicine focusing on more than five hundred fifty bed hospital, and contributes to make guidelines for safety and efficiency in lab. Methods: Questionnaires to supervisor technologist and field surveys to medical laboratories in korean hospitals have been conducted for the data collection. 16 answers have been analysed statistically by MS Excel program. Results: Most of the sample tests such as hematology, clinical chemistry, immunology, transfusion, urinalysis, microbiology and molecular diagnosis are performed by more than 80% in large sized general hospital laboratory. In the test methods, automatic analyzers are used up to 80%, total laboratory automation up to 43% in clinical chemistry and immunology, and manual tests in all sorts of the test. There are placed in single lab or two and three labs above the ground, which are all in semi-open lab. There is some correlation with the number of specimens and the number of lab people depending on the number of hospital beds. Laboratory environment shows that work distance is good, but evacuation path width, visibility, separation of staff area from automatic analyzer, and equipment installations are needed to have more spaces and gears. Most of the infection controls are equipped with mechanical ventilation, air-conditioning, washbasin and wastewater separation, BSC installation and negative pressure lab room. Implications: Although the laboratory space area is calculated considering the number of hospital beds, type of tests and number of staff, hospital's expertise and the samples numbers per year should be taken into account in the planning of the hospital.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.43-43
• /
• 2019

The collection, evaluation and conservation of crop germplasm have been treated as one of the basics to breeding program. An understanding of genetic relationships among germplasm resources is vital for future breeding process like yield, quality, and resistance. In the present study, EST-SSR markers were employed to assess the polymorphism and genetic diversity of 192 accessions of Proso millet preserved in the National Agrobiodiversity Center of RDA. We evaluated the efficiency of EST-SSR markers developed for proso millet species. A total of 98 alleles were detected with an average allele number of 4.5 per locus among 192 proso millet millet accessions using 22 EST-SSR markers. The averaged values of gene diversity ($H_E$) and polymorphism information content (PIC) for each EST-SSR marker were 0.362 and 0.404 within populations, respectively. Our results showed the moderate level of the molecular diversity among the proso millet accessions from diverse countries. A phylogenetic tree revealed three major groups of accessions that did not correspond with geographical distribution patterns with a few exceptions. The less correlation between the clusters and their geographic location might be considered due to their type difference. Our study provided a better understanding of genetic relationships among various germplasm collections, and it could contribute to more efficient utilization of valuable genetic resources. The EST-SSR markers developed here will serve as a valuable resource for genetic studies, like linkage mapping, diversity analysis, quantitative trait locus/association mapping, and molecular breeding.

• Journal of Korean Clinical Health Science
• /
• v.9 no.2
• /
• pp.1493-1501
• /
• 2021

Purpose: The purpose of this study is to classify the characteristics of each item of CIST evaluation and to find out the degree of recognition of the characteristics of the cognitive tool. Methods: This study was conducted for occupational therapy majors at M University located in Gyeongsangnam-do. The data collection from May to June 2021. Total of 25 copies of the data were finally analyzed, SPSS Statistics 26 was used for data analysis. Results: As a result of the study, the significance level was visual reasoning 1 test strip and the visual reasoning 1 tool. In the relationship between the correspondence 1 figure simulation sheet and the figure simulation tool for each item and statistically significant, and the correspondence 2 visual reasoning 2 sheet. Visual reasoning 2 sheet and visual reasoning tool also showed that was found to be statistically significant. The correlation for visual reasoning 1 sheet and the visual reasoning 1 tool, reasoning 2 tool and visual reasoning 1 sheet, and the visual reasoning 2 tool and the verbal reasoning sheet. Conclusion: In this study, in the CIST items that may be difficult, it is better to attach the actual tool rather than the verbal explanation of the test paper to increase the efficiency of the test and the understanding of subjects with mild cognitive impairment. It was implemented by applying the tool, and it was found that the use of the tool in the visual reasoning item showed a high correlation by item. Furthermore, based on this study, it will be possible to suggest a method to control the difficulty of each subject of the cognitive evaluation tool, and to prepare a standard for future research.

• Journal of KIBIM
• /
• v.10 no.4
• /
• pp.50-59
• /
• 2020

Recently, the government has actively promoted the introduction of BIM at the national level to improve the efficiency and productivity of the construction industry, and private interest in the application of BIM has also increased. However, despite the large amount of references and information, not much research has been done in quantitative ways to accurately measure the performance of BIM projects. The purpose of this study is to review performance measurement cases using ROI, investment effect analysis, and queue model analysis using domestic and overseas BIM guideline research and to present standard templates that can quantitatively measure BIM performance records according to domestic conditions based on this. Performance measurement trends and cases according to the application of BIM were analyzed, and nine quantification elements were derived from this, and based on this, a performance measurement data collection template at the BIM life cycle stage was prepared. Detailed items and contents were prepared for the nine quantification elements, and the final template consisted of a total of 43 questions, divided into the entire stage (15), the beginning (8), the middle (8), and the latter (12) areas. It is expected that by using the standard template of railway BIM performance records developed in this study, the BIM design stage will be diagnosed and the deficiencies will be supplemented, which will be the basic data for measuring actual quantitative performance in all life cycle performance of future BIM projects.

• Journal of Korean Society for Quality Management
• /
• v.52 no.1
• /
• pp.23-42
• /
• 2024

Purpose: This study aims to investigate the impact of two types of information quality, which are platform-oriented information quality and customer-oriented information quality, on customers' decision-making processes in the Online to offline (O2O) platform environment. Grounded in the product brokering efficiency model, which encompasses screening cost, evaluation cost, and decision quality, a model framework was developed. Furthermore, this study explores how these decision-making processes affect customer loyalty. Methods: Given that food delivery apps are the most widely used O2O service in Korea, this study targeted users of these apps for data analysis. We conducted hypothesis testing through a purposive sampling methodology focusing on food delivery app users. A Partial Least Squares Structural Equation Modeling analysis was conducted to analyze the data. The data collection occurred via an online survey from October to December 2021, with a total of 212 respondents participating. Results: The results of this study revealed the significant role of information quality in helping customers' decision processes while using food delivery apps. Specifically, it was found that platform-oriented information positively influences decision quality, while customer-oriented information significantly affects both the reduction of evaluation cost and the enhancement of decision quality. Additionally, the study indicated that lower evaluation costs and higher decision quality lead to increased platform loyalty. However, a reduction in screening cost did not have a significant impact on platform loyalty. Conclusion: While previous studies have overlooked the existence of two sides, service provider and user, in a platform, this research holds significance in its analysis of how information quality impacts loyalty by utilizing the two kinds of information quality. Practitioners can enhance customer loyalty to the platform by enriching customer-oriented information, thereby reducing customers' evaluation costs and encouraging more loyal usage of the platform.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.35 no.1
• /
• pp.127-148
• /
• 2024

This study aimed to propose considerations for attributes and their standardization strategies during the data collection process for electronic publications by domestic distributors for the National Library of Korea. The research identified a total of 21 essential and optional attributes based on a survey and a Focused Group Interview (FGI) with the staff responsible for legal deposit and acquisition tasks at the National Library of Korea. Additional attributes were found necessary during the data quality verification process, leading to the specification of essential and optional attributes for various types of materials, including eBooks, audiobooks, webtoons, and web novels. The standardization of attribute values, essential for enhancing the identifiability and management efficiency of electronic publications, included adherence to ISO 8601 rules for dates and times, clear designation of limited-range attribute values such as file format and adult content, and detailed description of information related to titles. Furthermore, the study highlighted the need for establishing standardized metadata requirements and continuous data quality management and monitoring systems.

• Land and Housing Review
• /
• v.7 no.1
• /
• pp.9-18
• /
• 2016

This research aims to build a total information system that systematizes existing sporadic information, which may lead to revitalization and efficiency of overseas urban development. To achieve this, this study firstly analyses the current information systems for urban development in foreign countries and information from the private sector. The results show that the information system that operates in the domestic agencies, are less likely to involve the contents related to information sharing, social network building and business process. However, that used in agencies ordering the overseas urban development projects, mostly provides the information of professionals, project participants and their business. Second, this research selects the information to be provided by the integrated information system and proposes a data collection plan. The information, required to push forward urban development in abroad, is classified into seven categories. Third, this study establishes a target model of comprehensive information system and makes suggestions for institutional improvement. For doing this, it categorizes overseas urban development information, links to classified information, organizes the system into three stages to services through informational channels, and then suggests a target model. Furthermore, it proposes institutional improvement to achieve efficiency of information systems through a comprehensive review of the similar cases such as administrative system of architecture(Seumter) and land information system.