• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.339-342
• /
• 2005

In this paper, a hand-operating method (tiled test method) of the wool-blending sample is made out, and make use of the method, the test of wool-blending bundle in different blending ratio is accomplished. According to the test data, the synthesis method of the stretch curve is worked out and the synthesis software for the typical stretch curve of wool-blending bundle is designed. Through laboratory hand-operating method, the blending fasciculus applying to fiber bundle test can be obtained in a short time. Calculation for sampling is accomplished in the article. We bring up 9 new signs to describe the characteristics of the curve behind peak for the first time: elongation behind peak (HE), elongation percentage behind peak (HEP), relative elongation rate behind peak (RHE), total break work $(W_a)$, break work behind peak (HW), break work coefficient behind peak (HWC), elongation percentage of half-load behind peak (HEL), load percentage of half-elongation behind peak (HLE), break efficiency behind peak (HEC).

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.16-23
• /
• 2012

Research into the development of high strength (1 GPa) and superior formability, such as total elongation (10%), and stretch-flangeability (50%) in hot-rolled steel was conducted with a thermomechanically controlled hot-rolling process. To improve the overall mechanical properties simultaneously, low-carbon steel using precipitation hardening of Ti-Nb-V multimicroalloying elements was employed. And, ideal microstructural characteristics for the realization of balanced mechanical properties were determined using SEM, EBSD, and TEM analyses. The developed steel, 0.06C-2.0Mn-0.5Cr-0.2(Ti + Nb + V), consisted of ferrite as the matrix phase and second phase of granular bainite with fine carbides (20-50 nm) in both phases. The significant factor of the microstructural characteristics that affect stretch-flangeability was found to be the microstructural homogeneity. The microstructural homogeneity, manifest in such characteristics as low localization of plastic strain and internally stored energy, was identified by grain average misorientation method, analyzed by electron backscattered diffraction (EBSD) and hardness deviation between the phases. In summar, a hot-rolled steel having a composition 0.06C-2.0Mn-0.5Cr-0.2(Ti + Nb + V) demonstrated a tensile strength of 998 MPa, a total elongation of 19%, and a hole expansion ratio of 65%. The most important factors to satisfy the mechanical property were the presence of fine carbides and the microstructural homogeneity, which provided low hardness deviation between the phases.

• The Research Journal of the Costume Culture
• /
• v.21 no.2
• /
• pp.246-260
• /
• 2013

This research was carried out on women in their 20s and 30s who have overweight lower body. The subjects selected for this study were women a Rohrer index of 1.6 or higher, a waist circumference 78.5cm to 83.5cm, and a lower drop of at least 18cm. The aim is to propose a prototype of bi-stretch pants meeting demands for both functionality and aesthetic appeal. Various clothing patterns ease amount of the waist and hip circumferences and crotch depths and were developed. They had different crotch widths, and center back line angles. The results showed that the best pants patterns were ease 1cm to the total hip circumference. The front hip circumference was H/4-0.5cm, and the back hip circumference was H/4+1cm. The front crotch width was H/20+1cm, the back crotch width was H/10+3cm. No additional ease was given to the total waistline. The front waist circumference was W/4+0.5cm. The back waist circumference was W/4-0.5cm. The knee circumference was set at 44cm, the pant hem width was set at 36cm, and the pant length was set at 100cm-5cm. The findings of this research can be used as basic data for stretch pants that fit the abdomen, hips, and thighs for women in their 20s and 30s with overweight lower body.

• Korean Journal of Metals and Materials
• /
• v.50 no.7
• /
• pp.487-493
• /
• 2012

To analyze the factors on stretch-flangeability for 980 MPa-grade hot-rolled steels, two types of steels (Fe-Cr and Fe-Mo) were manufactured by hot-rolling. Manufactured steels at the low coiling temperature, such as 400 and $500^{\circ}C$, had poor stretch-flangeability due to un-uniformly distributed carbides and a large deviation of interphase hardness. However, when the coiling temperature was set at $650^{\circ}C$ with Fe-Cr steel, 998 MPa of ultimate tensile strength, 19% of total elongation and 65% of the hole expanding ratio were achieved by microstructural constituents of polygonal ferrite (PF) and granular ferrite (GF) dispersed with fine carbides (<50 nm). Therefore, the material to attain 980 MPa with superior formability was the Fe-Cr steel that was precipitation-hardened in polygonal ferrite and granular ferrite at the coiling temperature $650^{\circ}C$.

• Fisheries and Aquatic Sciences
• /
• v.27 no.7
• /
• pp.421-433
• /
• 2024

Among larger species of fish found in Punatsang chhu, Brown trout (Salmo trutta) and Snow trout (Schizothorax richardsonii) are notable species. Snow trout is a native species, whereas Brown trout is an introduced species. Brown trout is noted to have a negative impact on the population of native species worldwide. This study studied the population dynamics and structure of these species to detect if the introduced species affected the native species adversely. The study was conducted on a 30 km stretch of Punatsang chhu including its major and minor tributaries at about their confluences. In total, 56 sample plots of a 200 m sampling stretch were studied with a 200 m distance between each stretch. Length, weight, maturity, and sex data for both species were collected along with the habitat and water parameters. The two species were found to prefer different areas within a single stretch with a rare overlap. Snow trout were found to be distributed widely within the basin whereas Brown trout were only found in altitudes higher than 1,000 masl ($\overline{x}$ = 1,231.77) and in turbid waters (p = 0.009). Recruitment of Snow trout was not good whereas recruitment of Brown trout was good. Length-frequency graphs indicated good inverse J distribution for the Snow trout population and sporadic for Brown trout. There is an effect of Brown trout introduction to the Snow trout living in the study area. Places invaded by Brown trout have a lesser presence of Snow trout compared to places not invaded by these species.

• Korean Journal of Ecology and Environment
• /
• v.33 no.3 s.91
• /
• pp.197-205
• /
• 2000

Factors most strongly related to zooplankton growth rates were studied along a lake and a river stretch in the middle part of the lowland River Spree. The study was conducted at the lake inflow (S1), the lake outflow (S2), and at the end of a 21 km stretch of the outflow (S3) from March to November of 1999. Total zooplankton biomass increased significantly at S2 and then sharply decreased at S3. The abundance of microzooplankton (rotifers and nauplii) was strongly higher than macrozooplankton (cladocerans and copepodids) at all station. However, macrozooplankton biomass (${\mu}$g dw 1$^{-1}$) was similar or much higher than microzooplankton biomass. Large-bodied cladocerans (Daphnia cucullata) dominated at S2 while small-bodied cladocerans (Bosmina longirostris) dominated at S1 and S3. Patterns in growth rates (r$_{t}$ in d$^{-1}$ of the major zooplankton community were greatly different between S1 and S2 (lake stretch) and between S2 and S3 (river stretch). In the lake, growth rates generally were positive, while values of growth rates were negative in the river stretch. Among the environmental variables considered, partial retention time (PRT, d$^{-1}$) seemed to play the most important role in determining characteristics of the zooplankton community structure in the middle part of River Spree.

• Journal of Fashion Business
• /
• v.14 no.3
• /
• pp.64-74
• /
• 2010

The purpose of this study is to broaden the realm of the fashion design using print hereafter and to urge designers to the better quality design by presenting successful case. As a method of the study, the literature and visual data in this study were reviewed focusing on the 1960's, which was Pucci's golden age. For the historical background, textual and visual data related to sixties fashion and Italian fashion were referred. Foreign literature was investigated to study life of Pucci and his design tendency in fashion because domestic papers and research data were rare. Out of this, characteristics of fashion design of Pucci and conclusion were extracted. Emilio Pucci was born to an illustrious Florentine aristocratic family in 1914. He was a designer, businessman and politician. Pucci's design has following characteristics. Firstly, gorgeous geometric prints with brilliant colors were key factor in Pucci's fashion design. Secondly, Pucci's design in fashion was a luxury sporty casual style symbolizing wearer's status and position in society. Thirdly, Pucci liberated the wearer's body using light and stretch material matching comfortable and active style. Lastly, Pucci developed total fashion dealing with various items widely including clothes and non-clothing products.

• Science of Emotion and Sensibility
• /
• v.25 no.3
• /
• pp.77-90
• /
• 2022

This study seeks to develop a stretch sensor for measuring the wrist movements of people using fishing lures. In order to confirm wrist movement, a stretch sensor was attached to the wrist band, and measurements of the dorsiflexion, plantar flexion, and fishing landing motion were measured using a scale to gauge factor, tensile strength, and elongation recovery rate. A conductive sensor using CNT dispersion was developed and applied to the E-band under the same conditions. A total of 15 sensors of the same size and five types of impregnation once, twice, and three times each were used to measure the gauge factor using UTM. The sensor that was impregnated twice had the best gauge rate, and the prototypes were manufactured with three sensors with high gauge rates and tensile strength. The results of the operation test conducted by connecting to the Arduino showed that Sample 1, which had the highest tensile strength and gauge factor, had a stable graph wavelength in three operations. Samples 2 and 3 showed stable wavelengths in the dorsiflexion and the plantar flexion; however, signal noise appeared in the fishing landing motion. This showed stable wavelengths in the two motions, but the wavelengths of the graphs differ depending on the tensile strength and gauge factor in the fishing landing motion. As a result, it was possible to identify the conditions necessary for manufacturing a stretch sensor for measuring wrist movement. This study will contribute to the development of smart wearable products for lure fishing.

• Microbiology and Biotechnology Letters
• /
• v.46 no.2
• /
• pp.135-144
• /
• 2018

The rapid increase in number and diversity of Extended Spectrum ${\beta}$-Lactamases (ESBLs) producing Enterobacteriaceae in natural aquatic environment is a major health concern worldwide. This study investigates abundance and distribution of ESBL producing multidrug resistant Enterobacteriaceae and molecular characterization of ESBL genes among isolates from highly polluted stretch of river Yamuna, India. Water samples were collected from ten different sites distributed across Delhi stretch of river Yamuna, during 2014-15. A total of 506 non duplicate Enterobacteriaceae isolates were obtained. Phenotypic detection of ESBL production and antibiotic sensitivity for 15 different antibiotics were performed according to CLSI guidelines (Clinical and Laboratory Standard Institute, 2015). A subset of ESBL positive Enterobacteriaceae isolates were identified by 16S rRNA gene and screened for ESBL genes, such as $bla_{CTX-M}$, $bla_{TEM}$ and $bla_{OXA}$. Out of 506 non-duplicate bacterial isolates obtained, 175 (34.58%) were positive for ESBL production. Susceptibility pattern for fifteen antibiotics used in this study revealed higher resistance to cefazolin, rifampicin and ampicillin. A high proportion (76.57%) of ESBL positive isolates showed multidrug resistance phenotype, with MAR index of 0.39 at Buddha Vihar and Old Delhi Railway bridge sampling site. Identification and PCR based characterization of ESBL genes revealed the prevalence of $bla_{CTX-M}$ and $bla_{TEM}$ genes to be 88.33% and 61.66%, respectively. Co-occurrence of $bla_{CTX-M}$ and $bla_{TEM}$ genes was detected in 58.33% of the resistant bacteria. The $bla_{OXA}$ gene was not detected in any isolates. This study highlights deteriorating condition of urban aquatic environment due to rising level of ESBL producing Enterobacteriaceae with multidrug resistance phenotype.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.