• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.155-160
• /
• 2005

Gravity thickening process has been widely used in WTP sludge thickening at domestic water treatment plant. The operation method of the process is very simple, however, the process requires long detention time about 24~48 hours for sludge thickening, uses polymer, and low total solids of thickened sludge to increase sludge thickening efficiency. To solve there problems, we studied about flotation process, especially, electro-flotation (EF) process in WTP sludge thickening. Electro-flotation process is simpler than dissolved-air-flotation(DAF) process because EF needs only electrode and current to generate micro-bubbles and the operation is easy. This study was performed at two batch columns to compare interface height, total solids, effluent turbidity between an electro-flotation thickening and a gravity thickening. According to the result, an electro-flotation thickening was that interface height was decreasing, total solids had high concentration, and effluent turbidity was low in comparison with a gravity thickening. Also, it will make the high efficiency of following process, such as a dehydrating process and digestive process. because of high total solids and low moisture content in the sludge.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.173-185
• /
• 2004

The production using U-shaped line is studied. This research presents the relationship among machining time, cycle time and production rate in a U-shaped line. The U-shaped line produces shafts by automated machines. In this paper when any production rate is given the U-shaped line always satisfies the production rate. An algorithm is developed for the determination of cycle time, the number of machines and workers of the U-shaped line in order to minimize the total machine capacity and the number of workers for any given production rate. The U-shaped line was successfully designed by applying the proposed algorithm.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.49
• /
• pp.67-76
• /
• 1999

This research presents the relationship among machining time, cycle time and demand rate in a cellular manufacturing system. The manufacturing cell produces part families by automated machines. This paper discusses the cases of increasing demand rate in an existing cell and designing cell based on the demand rate. This research developed an algorithm for decision making such as cycle time, machines and workers in order to minimize the total machine capacity and the number of workers for any given demand rate. The proposed algorithm was successfully applied for the design and operation of cell manufacturing with a good result.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.69-80
• /
• 2016

Some studies were conducted for the purpose of minimizing total clearance time for rapid evacuation from the indoor spaces when disaster occurs. Most studies took a long time to calculate the optimal evacuation route that derived minimum evacuation time. For this reason, this study proposes an evacuation route assignment algorithm that can shorten the total clearance time in a short operational time. When lots of exits are in the building, this algorithm can shorten the total clearance time by assigning the appropriate pedestrian traffic volume to each exit and balances each exit-load. The graph theory and greedy algorithm were utilized to assign pedestrian traffic volume to each exit in this study. To verify this algorithm, study used a cellular automata-based evacuation simulator and experimented various occupants distribution in a building structure. As a result, the total clearance time is reduced by using this algorithm, compared to the case of evacuating occupants to the exit within shortest distance. And it was confirmed that the operation takes a short time In a large building structure.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.470-479
• /
• 2004

The experimental conditions and relationships between parameters such as organic matter, aeration volume, aeration time, and precipitation time for the effective treatment of domestic wastewater were investigated. With the batch systems, the adsorption amount of unit microbe was measured with the change of MLSS concentration, precipitation time, and aeration amount. Theoretical adsorption amount of microbes was then numerically formulated by use of a SPSS multiple analysis as follows: $$Y=-0.0106(X_1)+0.07310(X_2)+42.705(X_3)+62.700$$ In this study, the amount of organisms to be removed in the range of MLSS concentration 2,000~4,500 mg/l were examined. In order to investigate the optimal condition of nitrification, the upper water in the biosorption stage was used as the initial experiment water. The results showed that the C/N ratio was 1.5 and the reaction time for the optimal nitrification was 1.5 hr. When the adsorption efficiency for microbe biosorption was 66%, the optimum denitrification efficiency was 83.3%. When the optimum parameters obtained from the batch experiment were applied to the lab-scale operation, the total retention time from the flow-in to flow-out was 10 hours and the removal efficiency was 93.8% for $COD_{cr}$ and 80.9% for TN. For the full-scale operation, the total retention time was 9.0 hours and the removal efficiency was 94.4% for BOD, 89.6% for $COD_{cr}$, 88.0% for TN, and 86.2% for TP.

• Asia-Pacific Journal of Business
• /
• v.12 no.1
• /
• pp.151-163
• /
• 2021

Purpose - The break-even point refers to the point where total profit and total cost coincide, and from this point on, the entrepreneur's decision-making takes a different route. Strategic decisions can be made for more efficient operation and eventually for more likelihood for growth and sustainability if a startup figures out when it recoups the investment and switches to a net profit. Design/methodology/approach - 748 creativity and skill-based sole proprietors in manufacturing industry were examined to demonstrate the effect of the entrepreneur's entrepreneurial experience and education level, the business launch preparation time, or the self-financing on the achievement of break-even point. Findings - While the business launch preparation time lowered the likelihood of reaching a break-even point, self-financing increased the likelihood. As a result of further analysis by subdividing into subgroups according to skill level, only the business launch preparation time was statistically significant in the highly skilled industries. In the low skilled industries, in addition to the business launch preparation time, the CEO's education level and the self-financing were statistically significant. Research implications or Originality - The longer the business launch preparation time, the higher the start-up cost, which increases the burden of initial cost recovery, and the agile response to market changes is thereby delayed, resulting in the business idea losing its appeal. Self-financing not only provides stability and strong motivation for the business operation but also promotes careful spending which contributes to the achievement of break-even point. In particular, it is found that practical experience is more useful than theoretical knowledge in low skilled industries. Due to the limitation of secondary data based on the recollection, the time required to reach a break-even point, percentage of financing sources, etc. may include cognitive errors. In addition, variables are not included that explain the characteristics of creativity and skill-based sole proprietorship, so it is necessary to exercise caution with the actual application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.787-795
• /
• 1998

In this paper, we have improved the speed of gradient operation, which needs to calculate Optical Flow for estimating a moving object, and proposed a method which estimate the contour of a moving object by the logical operationg of Optical Flow and edge in noisy images. The proposed method, which recognize to a moving ogject and traking a moving object, using logical operation of Optical Flow and edge in low-level has a advantage that is simpler than the known method for moving objects estimation. In addition, we have simulated several images using method I and method II on improved Gradient operation speed. When we have compared the average value of total operation time, method I is improved with 12% of operation speed compared with the known method, method II is improved with 38% operation speed.

• Journal of Chest Surgery
• /
• v.22 no.4
• /
• pp.609-619
• /
• 1989

During aortic valve surgery, cardioplegic solution is delivered through direct cannulation of both coronary ostia. Since this approach may cause an intimal injury leading to acute dissection or late ostial stenosis, this study was undertaken to evaluate myocardial protective effect of retrograde perfusion of cardioplegia [RCSP <% RRAP] in 18 clinical cases, which were compared with antegrade perfusion of cardioplegia in 27 clinical cases. This study were investigated 1] cease and return of electromechanical activity after cardioplegia infusion 2] the myocardial temperature during operation 3] the aortic cross clamping time and total bypass time 4] frequency of DC shock for defibrillation 5] need for inotropic drugs after operation 6] electrocardiographic evidence of myocardial infarction or ventricular arrhythmia after operation 7] the enzymes activity during preoperative and postoperative period as an evaluation of myocardial ischemic injury and 8] operative mortality rate The combination of retrograde cardioplegia and topical cooling with ice slush yielded promptly hypothermia of myocardium and shorter aortic cross-clamping time compared with antegrade cardioplegia [P < 0.05]. The temperature of the interventricular septum was maintained below 20oC by continuous perfusion or intermittent perfusion of cold blood cardioplegia and other results were no statistically significant difference between the two methods [P >0.05]. This technique provides clear operative field and avoids some serious complications which are caused by coronary ostial cannulation. These results suggested that the retrograde perfusion of cardioplegia is a simple, safe, and effective means of myocardial protection during open heart surgery.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.153-162
• /
• 1997

M/G/1 queueing system is one of the most widely used one to model the real system. When operating a real systems, since it often takes cost, some control policies that change the operation scheme are adopted. In particular, the N-policy is the most popular among many control policies. Almost all researches on queueing system are based on the assumption that the arrival rates of customers into the queueing system is constant, In this paper, we consider the M/G/1 queueing system whose arrival rate varies according to the servers status : idle, set-up and busy states. For this study, we construct the steady state equations of queue lengths by means of the supplementary variable method, and derive the PGF(probability generating function) of them. The L-S-T(Laplace Stieltjes transform) of waiting time and average waiting time are also presented. We also develop an algorithm to find the optimal N-value from which the server starts his set-up. An analysis on the performance measures to minimize total operation cost of queueing system is included. We finally investigate the behavior of system operation cost as the optimal N and arrival rate change by a numerical study.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.26-35
• /
• 2009

Efficient recovery assistance for individual households is one of the inevitable issues in management after a disaster. Discussion on how the assistance should be provided to them, however, has been put aside whereas amount or contents of it have been disputed every time a disaster happens. Public support system in a time of disaster in Japan is very complicated because many laws are related to recovery support and each law covers just a part of total recovery needs of affected household. It is difficult to see whole picture of the system for affected households. Therefore, households must have many interactions with various sections in charge of particular assistance service to know the contents of each assistance and requirements to receive it to decide combination of supports they use. It is crucial for efficient recovery assistance operation to manage those customer relations since considerable part of troubles in individual recovery came from failure in each interactions caused by lack of common understanding on each recovery process between them. In this paper, I want to introduce how support system in Japan is fragmented, a case of Anamizu town which adopted a customer-oriented framework of information management system for their assistance operation after Mar. 2007 Noto peninsula earthquake and what was learned from the case.