• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.180-186
• /
• 2022

This study is a pilot study to confirm the effectiveness of training after applying emergency simulation training for inactive nurses and to present a new model of simulation training operation method. In this study, the control group is a group that directly participates in the simulation activity, and the experimental group is the group that observes the control group's simulation activity. Experimental group and control group were matched 1:1 to experience all the roles of the resuscitation team. The study participants were 5 inactive nurses in the experimental group and 5 inactive nurses in the control group, and the total training time was 5 hours. The emergency simulation operation composition consists of theory education, skill education, and simulation. The interview was conducted. The educational satisfaction of the participants was 4.65 points for theory education and 4.70 points for practical education based on 5 points. Participants' performance confidence improved from 3.60 points before operation to 7.20 points after operation. Emergency simulation operation consisted of pre-test, theory education, skill education, simulation implementation, debriefing, and post-test. Participants expressed that the choice of group greatly reduced the burden and anxiety about performing the role of the resuscitation team. However, difficulties and inexperience in the operation of the defibrillator were reported in the experimental group. The control group reported that the simulation activity of the experimental group was not significantly different from theirs. Through the results of this study, it was confirmed that emergency simulation education not only reduced the burden and anxiety of inactive nurses, but also had an effect of education. Based on the research results, it is proposed to expand the participants and verify the effectiveness of education through specific variables such as learning commitment, learner confidence, simulation satisfaction, and team effectiveness.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.33-39
• /
• 2011

This paper considers a performance analysis of set-top box (STB) power saving schemes. STB converts the signal into content which is then displayed on the television (TV) screen, and there are typically two operation modes: on mode and stand-by mode. The total energy consumption (TEC), a typical measure of power consumption of STB, is defined by the sum of power consumption in each mode. Recently there are some works of STB power saving schemes that transit STB operation modes efficiently, and the mode transition time point of those schemes can be different. Thus it is required to develop a performance evaluation method that reflects mode transition time points of each scheme to get TEC correctly. This paper proposes a performance evaluation method for STB power consumption using Poisson process to consider the mode transition time point. By modeling STB mode transitions as events of Poisson process, the average time duration of STB mode is computed and accordingly the effect of power saving is evaluated. The performance evaluation result shows that the proposed method achieves 1 to 19% improvement in power consumption compared with a conventional performance evaluation method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.626-631
• /
• 1997

This paper represents the design of a real-time image preprocessing system. The preprocessing system performs hardware-wise mask operations and thresholding operations at the speed of camera output single rate. The preprocessing system consists of the preprocessing board and the main processing board. The preprocessing board includes preprocessing unit that includes a $5\times5$ mask processor and LUT, and can perform mask and threshold operations in real-time. To achieve high-resolution image input data($20485\timesn$), the preprocessing board has a linescan camera interface. The main processing board includes the image processor unit and main processor unit. The image processor unit is equipped with TI's TMS320C32 DSP and can perform image processing algorithms at high speed. The main processor unit controls the operation of total system. The proposed system is faster than the conventional CPU based system.

• Smart Media Journal
• /
• v.8 no.4
• /
• pp.72-79
• /
• 2019

The automated demand response (DR) program encourages consumers to participate in grid operation by reducing power consumption or deferring electricity usage at peak time automatically. However, successful deployment of the automated DR program sphere needs careful assessment of appliances load profile (ALP). To this end, the recent method estimates frequency, consistency, and peak time consumption parameters of the daily ALP to compute their potential score to be involved in the DR event. Nonetheless, as the daily ALP is subject to varying with respect to the DR time ALP, the existing method could lead to an inappropriate estimation; in such a case, inappropriate appliances would be selected at the automated DR operation that effected a consumer comfort level. To address this challenge, we propose a more proper method, in which all the three parameters are calculated using ALP that overlaps with DR time, not the total daily profile. Furthermore, evaluation of our method using two public residential electricity consumption data sets, i.e., REDD and REFIT, shows that our energy management systems (EMS) could properly match a DR target. A more optimal selection of appliances for the DR event achieves a power consumption decreasing target with minimum comfort level reduction. We believe that our approach could prevent the loss of both utility and consumers. It helps the successful automated DR deployment by maintaining the consumers' willingness to participate in the program.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.61-72
• /
• 1999

This paper presents an estimation method of container handling capacity and selection of resource allocation strategies of container terminals using the computer simulation models. Simulation models are developed to model container terminal consisting of 4 berths considering the berth allocation strategies, crane allocation strategies and the total number of container cranes using Arena simulation package. The proposed models do not consider the yard operations and gate operations. All the input parameters for the models are estimated on the basis of the existing container terminal operation data and the planning data for the automated container terminal planned by Korean government. Four berth allocation strategies and three crane allocation strategies are considered. The total number of container cranes considered ranges from 12 to 15. Non-terminating simulation techniques are utilized for the performance comparison among alternatives. The performance measures such as average ship turnaround time, average ship waiting time, average ship service time, the number of containers handled per year, and the number of ships processed per year are used. The result shows that the berth allocation strategy minimizing the sum of the number of ships waiting, the number of busy container cranes and number of ships handled performs better than any other berth allocation strategies. In addition, the crane allocation strategy allocating up to 5 container cranes per berth performs better than any other crane allocation strategies. Finally there are no significant performance differences among the alternatives consisting of different total number of container cranes allocated.

• Journal of Wetlands Research
• /
• v.24 no.1
• /
• pp.38-43
• /
• 2022

Smart sewage treatment plant means creating a safe and clean water environment by establishing an ICT-based real-time monitoring, remote control management and intelligent system for the entire sewage treatment process. The core technology of such a smart sewage treatment plant can be operation control technology using measuring instruments. This research team analyzed and suggested the operation control technologies necessary for the establishment of the intelligent business by referring to the intelligent research projects of the sewage treatment plant in progress in Korea. As a result of the analysis, a total of six removal technologies were presented, including control by scale, reflow water control, linked treated water control, chemical quantity control, winter operation control, and total organic carbon control. By size, standards that can be classified into small and medium-sized large-scale are presented, and in the case of reflow water control, the location of water quality and flow sensors capable of managing reflow water is suggested. In the case of the linked treated water control, the influence and control points of the linked treated water on the sewage treatment plant were presented, and in the case of the chemical injection volume control, a system capable of optimizing the amount of chemical injection according to the introduction of an intelligent sewage treatment plant was presented. In the case of winter operation, the sensors and pumps to be controlled are suggested when considering the decrease in nitrification due to the decrease in water temperature. In the case of total organic carbon control, an interlocking system considering the total amount of pollution in the future was proposed. These operation control scenarios are expected to be used as basic data to be used in intelligent sewage treatment algorithms and scenarios in the future.

• Journal of Gastric Cancer
• /
• v.12 no.3
• /
• pp.187-193
• /
• 2012

Purpose: The aim of this study is to evaluate the feasibility and safety of cardia preserving proximal gastrectomy, in early gastric cancer of the upper third. Materials and Methods: A total of 10 patients were diagnosed with early gastric cancer of the upper third through endoscopic biopsy. The operation time, length of resection free margin, number of resected lymph nodes and postoperative complications, gastrointestinal symptoms, nutritional status, anastomotic stricture, and recurrence were examined. Results: There were 5 males and 5 females. The mean age was $56.5{\pm}0.5$ years. The mean operation time was $188.5{\pm}0.5$ minutes (laparoscopic operation was 270 minutes). Nine patients were T1 stage (T2 : 1), and N stage was all N0. The mean number of resected lymph nodes was $25.2{\pm}0.5$. The length of proximal resection free margin was $3.1{\pm}0.1$ cm and distal was $3.7{\pm}0.1$ cm. Early complications were surgical site infection (1), bleeding (1), and gastro-esophageal reflux disease (1) (this symptom was improved with medication). Late complications were dyspepsia (3) (this symptom was improved without any treatment), and others were nonspecific results of endoscopy or symptom. Conclusions: Cardia preserving proximal gastrectomy was feasible for early gastric cancer of the upper third. Further evaluation and prospective research will be required.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.315-318
• /
• 2006

This paper concerns about coupled dynamic analysis of the deep-seabed mining system in launching operation. The dynamic behavior of mining system consisting of lifting pipe, buffer station, flexible conduit and self-propelled miner is simulated in time domain. The launching operation is divided into four critical phases: (1) deployment of miner and flexible conduit, (2) deployment of lifting pipe, flexible conduit and miner, (3) touch-down of miner, (4) final launching. The dynamic responses of sub-systems - miner, flexible conduit, buffer and lifting pipe - are analyzed in each launching phase. According to the changing periods of forced excitation at the top, the dynamic responses of sub-systems are diverse in their characteristics. It has been shown that the total integrated responses of sub-systems are strongly affected by the design parameters. Especially, the principal dimensions of flexible conduit seem to be significant in determining of the global response. Based on the simulation results, safe operation conditions are investigated.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.1-10
• /
• 2018

As the growth of warehouse stores has been accelerated, the importance of logistics for warehouse stores has been also increasing. In this respect, this study analyzed the transportation efficiency after the integrated operation of depots by C Company using GIS. According to the results of analysis of changes in container shipment cargo volumes, in terms of delivery distances, a total of 1,028,699 km of delivery car driving was shown to be necessary when one depot was operated, while a total of 2,866,604km of car driving was shown to be necessary so that 1,028,699km of car driving was reduced per year. In terms of delivery time too, 62 hours of time was saved per day and a total of 36% reduction in time could be expected. This study presented the effects of depot integration and delivery changes to improve operation processes and reduce delivery time and distances using GIS OD Matrix. The results of this study can be used as an important indicator for judgment that can affect the delivery process of other warehouse discount stores.

• Journal of Gastric Cancer
• /
• v.10 no.1
• /
• pp.26-33
• /
• 2010

Purpose: We wanted to evaluate the technical feasibility and safety of totally laparoscopic total gastrectomy (TLTG) for treating early gastric cancer. Materials and Methods: The medical records of 11 consecutive patients who underwent TLTG after being diagnosed with early gastric cancer at Incheon St. Mary's Hospital, The Catholic University of Korea from February 2005 to September 2009 were retrospectively reviewed and their clinicopathologic characteristics and the surgical results wereinvestigated. Results: The mean operation time was $385.6{\pm}94.1$ minutes, the mean time for creating an intracorporeal anastomosis was $97.5{\pm}60.0$ minutes and the mean number of the harvested lymph nodes was $46.6{\pm}15.4$ The mean number of days after operation until starting a liquid diet was the $6.1{\pm}7.6^{th}$ postoperative day and the mean hospital stay after surgery was $14.2{\pm}11.9$ days. There was no case of open conversion, but there were 2 cases of intraoperative complication and 3 cases of postoperative complication. There was one case of postoperative mortality. The patient suffered from thrombocytopenia of an unknown cause, which was refractory to platelet transfusion, on $4^{th}$ postoperative day and the patient died of intraabdominal bleeding on the $6^{th}$ postoperative day. Conclusion: TLTG was a technically feasible and relatively safe procedure. However, a long time for creating the intracoproeal anastomosis and a long operation time are still problems to be solved.