• Asian-Australasian Journal of Animal Sciences
• /
• 제30권10호
• /
• pp.1442-1449
• /
• 2017

Objective: This study investigated the effect of microbial phytase supplementation on growth performance, tibia ash, plasma parameters, apparent ileal digestibility (AID) of amino acid (AA) and apparent digestibility of nutrients in Youxian Sheldrakes fed with low-phosphorus (P) cornsoybean diets. Methods: A total of 350 Youxian Sheldrakes (7d old) were randomly divided into 5 treatment groups: positive control (PC) group has adequate available P diet (0.42% and 0.38%, starter and grower), negative control (NC) group were deficient in available P (0.32% and 0.28%, starter and grower) and NC diet was supplemented with 3 levels of microbial phytase (500, 750, and 1,000 U/kg). Results: Dietary supplementation of phytase in NC diet improved the average daily gain, increased the levels of serum calcium (Ca), tibia Ca and P, AID of AA and apparent digestibility of energy and Ca in starter stage (p<0.05). There was an increased (p<0.001) in the utilization of P from 17.3% to 23.9%. Phytase supplementation (1,000 U/kg) has shown that the AID of His, Thr, Val, indispensable AA, Glu, Pro, and dispensable AA was higher (p<0.05) than that of NC. Moreover, phytase supplementation improved (p<0.05) serum and tibia Ca and P, AID of AA and apparent digestibility of dry matter, crude protein, energy, P and Ca, and reduced (p<0.05) feed to gain ratio (F/G) and the levels of serum alkaline phosphatase in grower stage. Likewise, an increase (p<0.001) in the utilization of P was noticed from 12.6% to 17.2%. Supplement phytase at 750 U/kg improved the AID of His, Thr, Asp, Cys, Pro, and Ser (p<0.05). Conclusion: The microbial phytase supplement could improve growth performance, AID of some AA and apparent utilization of other nutrients in Youxian Sheldrakes, and reduce excreta P load to environment.

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.165-179
• /
• 1993

Dicor has not been prescribed routinely, in spite of many advantages, because of esthetic limitations by excessive translucency and external shading. In an attempt to solve these problems, the technique of veneering Dicor by aluminous poreclain has been used and recently Dicor Plus system was developed. The purpose of this study was to evaluate the compatibility between Dicor and several veneering porcelains by measuring the shear bond strength and observing the failure mode and interface appearance with SEM. Total 55 Dicor disks(10.0mm diam. X 3.0mm thickness) were fabricated by lost wax technique and divided into five groups of 11. Veneering porcelains such as Dicor Plus, Vitadur Alpha, Vitadur N, Vivodent, and Ceramco II were built up over the center of the treated Dicor surface using paper tube(5.0mm diam. X 4.0mm height) and fired according to the manufacturesr’instructions. A representative sample from each group was completely embedded in epoxy resin and crosssectioned, and remaining 50 samples were embedded in epoxy resin with the bonded area perpendicular to table base. The shear bond strengths were measured by applying the shear load parallel to Dicor surface close to the bonded area. Failure modes and interface appearances were observed using SEM at 15 and 1000 magnification respectively. The obtained results were as follows : 1. The mean shear bond strengths showed Dicor-Dicor Plus(10.53 MPa); Dicor-Vitadur Alpha(8.84 MPa); Dicor-Vitadur N(7.37 MPa); Dicor-Vivodent(4.28 MPa); Dicor-Ceramco II(0.89 MPa). 2. The shear bond strength of Dicor-CeramcoII was significantly decreased compared with Dicor-Dicor Plus(p<0.01), but had no significant difference compared with Dicor-Vivodent(p>0.01). 3. The shear bond strengths of Dicor-Vitadur Alpha and Dicor-Vitadur N were not significantly different compared with Dicor-Dicor Plus(p>0.01). 4. SEM examination of bond failure modes revealed that Dicor-Dicor plus, Dicor-Vitadur Alpha, Dicor-Vitadur N exhibited cohesive failure within Dicor and Dicor-Vivodent exhibited adhesive failure. And Dicor-Ceramco III exhibited adhesive failure and cohesive failure within CeramcoIII together. 5. SEM examination of interfaces revealed that Dicor-Dicor Plus exhibited the most tight contact and Dicor-Vitadur Alpha, Dicor-Vitadur N exhibited acceptible contacts. But Vivodent exhibited discontinuous gap and Ceramco II exhibited large continuous gap.

• Journal of Korean Neurosurgical Society
• /
• 제46권4호
• /
• pp.322-327
• /
• 2009

Objective : Posterior lumbar interbody fusion (PLIF) is considered to have the best theoretical potential in promoting bony fusion of unstable vertebral segments by way of a load sharing effect of the anterior column. This study was undertaken to investigate the efficacy of PLIF with cages in chronic degenerative disc disease with Modic degeneration (changes of vertebral end plate). Methods : A total of 597 patients underwent a PLIF with threaded fusion cages (TFC) from 1993 to 2000. Three-hundred-fifty-one patients, who could be followed for more than 3 years, were enrolled in this study. Patients were grouped into 4 categories according to Modic classification (no degeneration : 259, type 1 : 26, type 2 : 55, type 3 : 11). Clinical and radiographic data were evaluated retrospectively. Results : The clinical success rate according to the Prolo's functional and economic outcome scale was 86% in patients without degeneration and 83% in patients with Modic degeneration. The clinical outcomes in each group were 88% in type 1, 84% in type 2, and 73% in type 3. The bony fusion rate was 97% in patients without degeneration and 83% in patients with Modic degeneration. The bony fusion rate in each group was 81% in type 1, 84% in type 2, and 55% in type 3. The clinical success and fusion rates were significantly lower in patients with type 3 degeneration. Conclusion : The PLIF with TFC has been found to be an effective procedure for lumbar spine fusion. But, the clinical outcome and bony fusion rates were significantly low in the patients with Modic type 3. The authors suggest that PLIF combined with pedicle screw fixation would be the better for them.

• 방송공학회논문지
• /
• 제18권2호
• /
• pp.215-224
• /
• 2013

스마트폰의 급격한 보급으로 인해 모바일 인터넷 방송 (Internet Protocol Television) 사용은 큰 폭으로 증가하여 이미 많은 네트워크 부하를 일으켰다고 보고되고 있습니다. 이러한 과부하문제를 해결하기 위한 방안으로 3GPP (3rd Generation Partnership Project)에서는 LTE (Long Term Evolution) Release 6 규격이후로 MBMS (Multimedia Broadcast and Multicast Service)에 대한 표준화 작업을 진행되고 있다. MBMS는 동일한 콘텐츠를 가지는 다수의 MBMS 사용자들과 동일한 대역폭을 공유하게 함으로써 대역폭 효율 측면에서 우수성을 가지고 있다. 본 논문에서는 단일 셀 MBMS을 지원하는 3GPP와 와이파이 (Wi-Fi) 2개의 네트워크가 혼재되어 있는 이종 네트워크 환경에서 단일 셀 MBMS가 지원되는 셀들에 속한 동일한 콘텐츠를 가지는 MBMS 사용자의 수가 많다면 MBMS 최우선 정책을 적용하고 그렇지 않은 경우에는 기존의 와이파이 우선 정책을 적용하는 알고리즘에 대한 성능 분석에 대한 연구를 수행하였다. 시뮬레이션을 통하여 제안하는 알고리즘은 전체 가용 대역폭의 증가와 네트워크 사용 비용의 감소를 보여주고 있음을 확인하였다.

• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.358-369
• /
• 2000

얇은 판형 용접에 광범위하게 사용되는 피복아크 용접기는 용접전원으로 변압기를 사용하는 AC 아크용접기외 인버터를 사용하는 인버터 아크 용접기로 구분된다. AC아크용접기는 변압기를 사용하므로 전체시스템의 부피 및 무게가 커지며 변압기 탭조정으로 인한 최적 출력전압이 설정되지 않아 용접성는이 저하되는 단침이 있다. 이러한 단점올 개선히고 용접성능을 향상시키기 위하여 고속반도체 소자를 이용한 인버터 아크용접기가 많이 연구되고 있다. 인버터 피복아크 용집기시스템은 다이오드 정류기, 인버터, 고주파 변압기, 출력측 정류기 및 리엑터로 구성되어져 있는데, 입력전원측에 다아오두 정류기를 사용함으로서 고조파 다량 힘유 및 입력역률 저하등을 가져오며, 일정 듀티를 갖는 정전압제어방식을 이용하고 아크용접시스템 고유의 정전류특성은 변압기의 누설구조애 의해 실현하고 았다. 따라서 본 논문에서든 이상의 단점을 해결하기 위하여 PWM 컨버터를 적용하여 입력측의 고조파를 제거하고 입력역률 99% 유지할 수 있었으며, 또한 새로운 혼형제어기법을 적용하여 순시적인 용접 출력전압과 전류를 제어하여 용접 출럭전압과 전류를 일정하게 유지시킴으로서 AC아크용접기와 비교하여 스패터룹 70%감소시켰으며 무부하시 10%의 효율 상승을 가져왔다.

• 한국수산과학회지
• /
• 제45권6호
• /
• pp.561-569
• /
• 2012

To evaluate the bacteriological water quality in Yongnam-Gwangdo, located in western Jinhae Bay, seawater samples were analyzed using sanitary indicator bacteria at 57 sampling stations. According to survey results from January 2007 to December 2009, the range of the geometric mean and the estimated 90th percentile for coliforms and fecal coliforms in the samples were <1.8-16.5 and 1.8-246.8 MPN/100 mL and <1.8-7.1 and 1.8-74.8 MPN/100 mL, respectively. The samples, including those taken from stations located in Wonmunman, Gwangdo, and Dangdong, showed high levels of microbial contamination caused by the climate and weather patterns in the marine environment. The bacteriological water quality in the area met Korean criteria for a designated shellfish growing area for export and National Shellfish Sanitation Program criteria for an approved shellfish growing area, except at station #49. A total of 24 direct pollution sources were discharged into the shellfish growing area. The radius of impact was calculated for each pollution source to assess the effect on the shellfish growing area. The calculated radius of impact for most of the pollution sources was below 300 m. However, the radius of impact for the combined pollution sources in Kyeonnaeryang was 93-1973 m. There were significant differences between the calculated closed sea area and actual monitoring results. The closed sea area values calculated from the fecal coliform load in drainage water tended to be higher than the actual monitoring results. Tidal currents and environmental factors such as salinity, water temperature, sunlight, and microbiological factors affect the survival of fecal indicator bacteria in seawater.

• Progress in Superconductivity
• /
• 제13권1호
• /
• pp.58-63
• /
• 2011

Recently, superconductor flywheel energy storage systems (SFESs) have been developed for application to a regenerative power of train, a power quality improvement, the storage of distributed power sources such as solar and wind power, and a load leveling. As the high temperature superconductor (HTS) bearings offer dynamic stability without the use of active control, accurate analysis of the HTS bearing is very important for application to SFESs. Mechanical property of a HTS bearing is the main index for evaluating the capacity of an HTS bearing and is determined by the interaction between the HTS bulks and the permanent magnet (PM) rotor. HTS bearing rotor consists of PM and iron collector and the proper dimension design of them is very important to determine a supporting characteristics. In this study, we have optimized a rotor magnet array, which depends on the limited bulk size and performed various dimension layouts for thickness of the pole pitch and iron collector. HTS bearing rotor was installed into a single axis universal test machine for a stiffness test. A hydraulic pump was used to control the amplitude and frequency of the rotor vibration. As a result, the stiffness result showed a large difference more than 30 % according to the thickness of permanent magnet and iron collector. This is closely related to the bulk stiffness controlled by flux pining area, which is limited by the total bulk dimension. Finally, the optimized HTS bearing rotor was installed into a flywheel system for a dynamic stability test. We discussed the dynamic properties of the superconductor bearing rotor and these results can be used for the optimal design of HTS bearings of the 10kWh SFESs.

• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.15-30
• /
• 2000

광전송망은 망의 장애에 미리 대비할 수 있도록 신뢰성과 생존도를 고려하여 설계하여야 한다. 동기식 다중화의 국제표준인 SDH(Synchronous Digital Hierarchy) 방식의 광전송망은 장애 발생시 이를 자동적으로 복구할 수 있도록 생존도를 고려한 여러 가지 망 재구성 기법들을 제공한다. 그 중 SHR(Self-Healing Ring)은 링의 형태로 망을 구성한 시스템으로 뛰어난 생존도와 경제성으로 통신사업자들의 기간통신망 구조로 활발히 채택되고 있다. 이 때, 링들이 설치되는 지역적 범위가 넓어지고 수요가 증가되면, 다수의 링들이 중첩되어 상호연결되는 다중링(Multi-ring) 구조로 발전하게 된다. 본 연구에서는 수요의 분할처리를 허용하는 BSHR(Bidirectional SHR)들이 연접한 다중링 설계 문제를 다룬다. 이 문제는 망구축용량을 최소로하는 관점에서 생존도가 보장되는 부하 최적화 문제가 되며, 혼합정수계획법에 의한 정식화가 가능하다. 그러나, 현실문제에서는 망구축용량의 최소화 뿐만아니라 노드가 수요로 다계위 수요가 주어지며 중계노드에서의 다중화 번들링도 같이 고려되어야 하므로 수리모형으로는 해결할 수 없는 복잡한 문제가 된다. 따라서 이 叩걋\ulcorner고려사항들을 반영한 최적근사해를 실시간내에 구할 수 있는 휴리스틱 알고리즘을 개발하게 되었다. 사례연구에서는 휴리스틱 알고리즘을 적용한 실제 망설계 문제를 설명하였고, 망구성 방법에 따른 차이와 다중화 번들링 여부로 인한 실험 결과를 비교하였다.

• 한국물환경학회지
• /
• 제36권4호
• /
• pp.284-299
• /
• 2020

Dam reservoirs play a particularly crucial role in processing the allochthonous and the autochthonous dissolved (DOC) and the particulate (POC) organic carbon and in the budget of global carbon cycle. However, the complex physical and biogeochemical processes make it difficult to capture the temporal and spatial dynamics of the DOC and the POC in reservoirs. The purpose of this study was to simulate the dynamics of the DOC and the POC in Daecheong Reservoir using the 3-D hydrodynamics and water quality model (AEM3D), and to quantify the mass balance through the source and sink fluxes analysis. The AEM3D model was calibrated using field data collected in 2017 and showed reasonable performance in the water temperature and the water quality simulations. The results showed that the allochthonous and autochthonous proportions of the annual total organic carbon (TOC) loads in the reservoir were 55.5% and 44.5%, respectively. In season, the allochthonous loading was the highest (72.7%) in summer, while in autumn, the autochthonous loading was the majority (77.1%) because of the basal metabolism of the phytoplankton. The amount of the DOC discharged to downstream of the dam was similar to the allochthonous load into the reservoir. However, the POC was removed by approximately 96.6% in the reservoir mainly by the sedimentation. The POC sedimentation flux was 36.21 g-C/㎡/yr. In terms of space, the contribution rate of the autochthonous organic carbon loading was high in order of the riverine zone, the transitional zone, and the lacustrine zone. The results of the study provide important information on the TOC management in the watersheds with extensive stagnant water, such as dam reservoirs and weir pools.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.531-537
• /
• 2016

기계 혹은 구조물의 파손 및 파괴는 소재의 내부에 존재하는 결함에서 발생하는 크랙에 의한 것이다. 이러한 크랙들은 밀집하여 존재하는 경우가 많기 때문에 크랙의 진전 및 성장특성들을 고려하지 않으면 안 된다. 이에 따라 본 연구에서는 표준 CT 시험편 내부의 크랙 및 구멍의 위치에 따른 파괴특성을 고찰하였으며, 표준CT 시험편에 편심된 집중하중을 가하였을 때, 시험편 내 크랙 주변의 구멍의 존재유무 및 위치에 따른 파괴역학적 거동에 대하여 규명하였다. 연구 결과로서 Model 3(크랙 주변에 구멍이 한 개 존재하는 시험편 모델로서 크랙의 끝부분과 구멍 간의 거리 가로방향으로 2mm의 경우)가 최대 변형량, 최대 응력 및 최대 변형 에너지, 모두 가장 크게 나타났으며, 모든 시험편 모델들이 시험편 내부의 크랙과 구멍의 거리가 가까울수록 최대 응력이 커지는 경향을 보였다. 또한 구멍의 개수와는 별개로 시험편 내부의 크랙 가까이에 구멍이 존재할 때 크랙 가까이에서 최대 응력은 커지는 경향이 나타나는 것을 알 수 있었으며, 이러한 본 연구 결과를 토대로 기계 혹은 기계 구조물 내부에 구멍을 뚫는다면, 시험편에 발생하는 파괴 응력의 값을 줄임으로써 파손이나 고장이 일어나는 것을 방지할 수 있을 것으로 사료된다.