• 한국실내디자인학회논문집
• /
• 제14권6호
• /
• pp.3-11
• /
• 2005

With development of digital technology and build-up of global network in the 21st century, Korea has recklessly accepted Western information and culture in recent years, thus causing damages to out identity. In the situation, restoration and development of traditions in a modern way will contribute to the creation of contemporary interiors. This study has analyzed and assessed the process through which traditional decorative elements have applied to contemporary interior decorations over the past ten years with a view to identify the trend of expressing traditional elements in comtemporary interiors. Designs that have applied traditional elements in a transfigure expression method amounted to 77 pieces, accounting for $43\%$ of the total investigated 178 designs, which was followed by 48 designs ($27\%$) of metaphor expression method and 39 designs ($22\%$) of symbol expression method, which express the tradition as interpreted by the designer. Designs that have adopted direct expression method amounted to no more than 14 pieces, accounting only for $8\%$ of the total designs. This result suggests that transformative, metaphoric and symbolic expressions that simplify or transform the original forms we more frequently used In the applications of traditional elements to modern interiors rather than directive expression that reproduces the original form as it was.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.189-194
• /
• 2024

This paper presents a radiation-hardened-by-design preamplifier that utilizes a self-compensation technique with a charge-sensitive amplifier (CSA) and replica for total ionizing dose (TID) effects. The CSA consists of an operational amplifier (OPAMP) with a 6-bit binary weighted current source (BWCS) and feedback network. The replica circuit is utilized to compensate for the TID effects of the CSA. Two comparators can detect the operating point of the replica OPAMP and generate appropriate signals to control the switches of the BWCS. The proposed preamplifier was fabricated using a general-purpose complementary metal-oxide-silicon field effect transistor 0.18 ㎛ process and verified through a test up to 230 kGy (SiO₂) at a rate of 10.46 kGy (SiO₂)/h. The code of the BWCS control circuit varied with the total radiation dose. During the verification test, the initial value of the digital code was 39, and a final value of 30 was observed. Furthermore, the preamplifier output exhibited a maximum variation error of 2.39%, while the maximum rise-time error was 1.96%. A minimum signal-to-noise ratio of 49.64 dB was measured.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.253-258
• /
• 2008

PLM(Product Lifecycle Management) is one of innovative manufacturing paradigms which leverages e-business technologies to allow a company's product content to be developed and integrated with all company business process through the extended enterprise. In these days, most construction companies also make an effort to enhance their systems for creating, sharing and managing information to improve business efficiency through entire lifecycle of project execution. Because of different needs, business process and diverse engineering activities such as design, structural analysis, installing simulation, documents and data managements, a new paradigm for construction companies is needed to manage and share the entire workflow, and information in total project lifecycle. In this paper, we conducted user requirement and business process analysis of the construction to design architecture of C-PLM(Construction Project Lifecycle management) and implement a prototype of C-PLM systems based on commercial PDM system.

• 대한산업공학회지
• /
• 제21권3호
• /
• pp.329-343
• /
• 1995

Traditionally, machining process sequence was influenced and constrained by the design information obtained from CAD data base, i.e., class of operations, geometric shape, tooling, geometric tolerance, etc. However, even though all the constraints from design information are considered, there may exist more than one way to feasibly machine parts. This research is focused on the integrated problem of operations sequencing and machine tools selection in the presence of the product mix and their production volumes. With the transitional costs among machining operations, the operation sequencing problem can be formulated as a well-known Traveling Salesman Problem (TSP). The transitional cost between two operations is expressed as the sum of total machining time of the parts on a machine for the first operation and transportation time of the parts from the first machine to a machine for the second operation. Therefore, the operation sequencing problem formulated as TSP cannot be solved without transitional costs for all operation pairs. When solved separately or serially, their mutual optima cannot be guaranteed. Machining operations sequencing and machine tool selection problems are two core problems in process planning for discretely machined parts. In this paper, the interrelated two problems are integrated and analyzed, zero-one integer programming model for the integrated problem is formulated, and the solution methods are developed using a Tabu Search technique.

• 한국의류학회지
• /
• 제34권4호
• /
• pp.606-616
• /
• 2010

This study investigates the flow that customers experience when they participate in a design process for the mass customization of apparel products according to participation level and individual personalities. In addition, how the flow influences the satisfaction and final purchase intention is also examined. The subjects were 600 female consumers. The following results were found: First, the level of mass customization was higher, the enjoyment, concentration, product satisfaction, and total satisfaction were higher. Second, the paths of 'participating ability'$\rightarrow$'flow', 'flow'$\rightarrow$'satisfaction'$\rightarrow$'satisfaction' 'final purchase intention' were significant. The process satisfaction had a more significant influence on the final purchase intention than the product satisfaction. Finally, the participation ability had a moderating effect for the flow experience according to the level of mass customization.

• 한국간호교육학회지
• /
• 제17권1호
• /
• pp.25-35
• /
• 2011

Purpose: The purpose of this study was to evaluate the effects of an intravenous injection case-based clinical performance examination for improvement of problem-solving skill, nursing process application, nursing skill, and learning satisfaction. Method: This study's design was a randomized control group design. A total 93 students (experimental group, 49 control group, 44) who were junior nursing students in South Korea were included in this study. Data were collected from August 12th to 19th, 2010 and analyzed using SPSS 18.0. Result: The mean score of problem solving skills, intravenous injection skill, and learning satisfaction were significantly higher in the experimental group than the control group. However, the mean score of nursing process application was not significantly different between the two groups. Conclusion: These results indicate that the case-based clinical performance examination is effective for problem solving skill, nursing skill, and learning satisfaction. Therefore, it is recommended to adapt such teaching methods with integrated nursing practice education for various clinical skills development.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.67-72
• /
• 2011

Solvent-free paint is sprayed from higher-pressure conditions, because the viscosity is large. The hydraulic actuator which can be operated under higher-pressure condition is required to spray solvent-free paints in painting process for the environmental protection. The purpose of this paper is to develop the hydraulic actuator under higher-pressure conditions for solvent-free paint spraying system. The hydraulic actuator consists of inner spool, outer spool and ball. The analysis of a structural stability was conducted by using ANSYS V11 under the design condition of upward and downward movement of spool. As a result, the maximum von-Mises stress applied on spool under 4mm displacement showed a value of 106MPa which was greater than the allowable stress of the spool with a value of 250MPa and a value of safety factor 3. This result suggested that the spool system be unstable under the design condition so that it was necessary for the spool system to be reinforced to secure the structural stability.

• Design & Manufacturing
• /
• 제18권2호
• /
• pp.9-16
• /
• 2024

Recently, there has been extensive research conducted on the miniaturization of semiconductors and the improvement of their integration to achieve high-quality and high-performance electronic devices. To integrate and miniaturize multiple semiconductors, thin and precise wafers are essential. The backgrinding process, which involves high-precision processing, is necessary to achieve this. The backgrinding system is used to grind and polish the back side of the wafer to reduce its thickness to ㎛ units. This enables the high integration and miniaturization of semiconductors and a flattening process to allow for detailed circuit design, ultimately leading to the production of IC chips. As the backgrinding system performs precision processing at the ㎛ unit, it is crucial to determine the stability of the equipment's rigidity. Additionally, the flatness and surface roughness of the processed wafer must be checked to confirm the processability of the backgrinding system. IIn this paper, the goal is to verify the processability of the back grinding system by analyzing the natural frequency and resonance frequency of the equipment through computer simulation and measuring and analyzing the flatness and surface roughness of wafers processed with backgrinding system. It was confirmed whether processing damage occurred due to vibration during the backgrinding process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.277-282
• /
• 2011

Bogie frame is typical safety part of railway vehicle. Total serviceable life of bogie frame will be evaluated by Cumulative Damage Approach Method that is defined by dynamic strain measurement during revenue service under the actual track conditions. As a result of the standardization process developed in British Standard Institution, BS 7608 defines for fatigue design and test method of steel structure by fatigue test results over the long period. This paper evaluates the total serviceable life applying BS 7608 for the bogie frame of Electric Multiple Unit to verify structural safety of the bogie frame.

• 정보처리학회논문지D
• /
• 제12D권1호
• /
• pp.73-80
• /
• 2005

객체지향 모델링에서 컴포넌트기반 방법을 사용하는 목적은 반복되는 시간 및 공간 복잡성을 줄여 연산능력을 높이는 것이다. 이러한 컴포넌트기반 방법의 많은 성과에도 북구하고 디자인 패턴과 그 표준화로 컴포넌트기반 방법의 재사용성을 놀이는 연구가 필요하다. 그러나 디자인 패턴을 표준화하는 방법으로 성급하게 메타패턴언어나 패턴저장소를 구축하는 방법은 오히려 소프트웨어 개발에 패턴을 적용하는 것을 더욱 복잡하고 어렵게 만들 수가 있다. 본 연구는 환경분야의 TMDL(오염총량제) 소프트웨어의 선계에 GoF 디자인 패턴을 적용함으로써, 과도하게 추상화된 메타패턴언어나 부가적인 패턴저장소를 두지 않고도 적용패턴을 검색, 추적할 수 있도록 설계단계에서 클래스이름에 패턴이름을 명시하는 방법을 제안하였다. 따라서 본 연구결과는 환경소프트웨어 개발과정에서 빈번하게 발생하는 반복과 중복을 줄일 수 있는 이점이 있다.