• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.58-58
• /
• 2010

The sediment geochemistry, including REE of surface and core samples in the western part off Jeju Island have been carried out in order to understand the provenance and hydrolic sorting. The sediment in the study area were primarily composed of coarse silt with a mean grain size of $2.8{\sim}82.8{\mu}m$. The ratios of TOC over total nitrogen (TN) showed that the study area sediments contained more organic matters of marine origin than those of terrigenous origin. The total A1203, Fe203, K20, MgO, and MnO contents and REE concentration of the fine sediments are higher than those of the coarse sediments. The higher Zr/Th and Zr/Yb ratios in coarse sediments relative to fine-grained detritus indicates sedimentary sorting. Grain size influence the REE concentrations of the study area sediment significantly. The < $63{\mu}m$ fraction of the sediment has higher REE concentration and different REE patterns when compared with those in bulk samples, due to the presence of REE-enrich heavy minerals. The REE distribution patterns of the western part of Jeju Island sediments are relatively enriched in most LREEs than the Yellow River sediment and depleted in the Changjiang River, but the LaN/YbN ratios are similar to the Changjiang sediment. The Eu/Eu* ratios ranged from 0.594~0.665(0.631) is much similar to the Yellow River sediment, possibly mixture of the sediments from these two rivers.

• Dementia and Neurocognitive Disorders
• /
• v.23 no.1
• /
• pp.11-21
• /
• 2024

Background and Purpose: Although dementia with Lewy bodies (DLB) is the second most common cause of neurodegenerative dementia, its clinical prevalence is low. We developed a short and easy-to-complete DLB screening questionnaire (DLBSQ) to raise diagnostic sensitivity in routine clinical settings. Methods: A total of 501 participants were retrospectively enrolled, including 71 controls, 184 patients without DLB, and 246 patients with probable DLB. All patients underwent clinical evaluation, including core features of DLB, the DLBSQ, brain magnetic resonance imaging, and detailed neuropsychological assessments. The diagnostic performance of the DLBSQ for probable DLB was investigated using a receiver operating characteristic curve analysis. Results: Total DLBSQ score was associated with visuospatial and frontal/executive dysfunction and the diagnosis of probable DLB. The area under the receiver operating characteristic curve for total DLBSQ score was 0.727. Youden's method revealed an optimal cutoff value of 3. The sensitivity and specificity of the DLBSQ were 68.7% and 62.4%, respectively. Its discriminating performance improved when cognitive test profiles were additionally considered (area under the curve: 0.822, sensitivity: 80.6%, and specificity: 70.4%). Conclusions: The DLBSQ might be a useful screening tool for DLB in routine clinical practice with good sensitivity and specificity.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2709-2716
• /
• 2020

Compositions of large nuclear cores (e.g. boiling water reactors) are highly heterogeneous in terms of fuel composition, control rod insertions and flow regimes. For this reason, they usually lack high order of symmetry (e.g. 1/4, 1/8) making it difficult to estimate their neutronic parameters for large spaces of possible loading patterns. A detailed hyperparameter optimization technique (a combination of manual and Gaussian process search) is used to train and optimize deep neural networks for the prediction of three neutronic parameters for the Ringhals-1 BWR unit: power peaking factors (PPF), control rod bank level, and cycle length. Simulation data is generated based on half-symmetry using PARCS core simulator by shuffling a total of 196 assemblies. The results demonstrate a promising performance by the deep networks as acceptable mean absolute error values are found for the global maximum PPF (~0.2) and for the radially and axially averaged PPF (~0.05). The mean difference between targets and predictions for the control rod level is about 5% insertion depth. Lastly, cycle length labels are predicted with 82% accuracy. The results also demonstrate that 10,000 samples are adequate to capture about 80% of the high-dimensional space, with minor improvements found for larger number of samples. The promising findings of this work prove the ability of deep neural networks to resolve high dimensionality issues of large cores in the nuclear area.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.265-265
• /
• 2022

Increased temperature caused by global warming has become a significant problem for the growth and production of crops. A high temperature has a direct or an indirect effect on crops, leading to a significant yield loss. The damage of a high temperature stress to rice depends on its developmental stage. In present study, we performed evaluate the heading date in different location, Yeoju and Miryang, during growth of Korean rice core set. The heading date for the 223 rice accession were evaluated in Yeoju City (37°23' 127°57') and Miryang City (35°50', 128°72') located on middle and southern part of Korea, respectively. The average temperature of a day was higher in Miryang during entire growth stage. Here, total 222 KRICE-Core set was analyzed by GWAS for the high temperature effect. GWAS results revealed the Chr07_26954556, a lead SNPs were significantly associated with delaying heading date of KRICE-Core set. Significance threshold was set with 6.0 > -log10(P), and Cross-Validation (CV) error suggested an optimal K value of 5 for the population based on the lowest cross-validation error K = 5.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.215-225
• /
• 2002

In order to evaluate the relationship between geochemical characteristics and benthic facies of the sediments from the Oenaro Island where red tide proliferation is first observed every year including this year, surface and short multiple core sediment samples were analyzed in terms of geochemical and benthic facies variation. The contents of organic carbon, carbonate, and sulfide gas were relatively low. The variation in C/N ratios, which indicate nature of organic carbon, suggested that the organic carbon recorded in the study area is composed of mixtures of marine and terrigenous organic matters. The concentration of minor elements found at the surface and multiple core sediment samples were also low as well as the enrichment factors(Ef) for the seven heavy metals indicated that the sediment of this area is not polluted significantly. The macrobenthic faunal community comprised 61 species, and their mean density was 708 ind./m2. Polychaete worms were major taxa of this benthic community. A crustacean amphipod, Melita sp. was the most abundant species accounted for 20.7% of total abundance, and the small polychaetes such as Heteromastus filiformis, Paralacydonia poradoxa, Magelona japonica and Sigambra tentaculata were the next dominant species. The macrobenthos around the Oenaro Island were more diverse and abundant than that in Gamak Bay. The benthic communities in the study area sustained somewhat different species composition based on the cluster analysis and the MDS ordination. The benthic community health condition at three stations seemed to be unbalanced, and slightly polluted based on the biological index such as BPI and BC. There was no clear relationship between the geochemistry characteristic and the benthic faunal facies attributed by the micro-algal blooms in this coastal area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• Composites Research
• /
• v.20 no.5
• /
• pp.26-33
• /
• 2007

Pull-out and shear strengths of insert Joints of sandwich structure were investigated by experiment. Specimens were prepared by cocuring of nomex honeycomb core and carbon-epoxy composite face using an adhesive FM73. A total of 75 specimens with 10 different types depending on the core height and density, face thickness, and loading direction were tested. In the test under pull-out loading, although both the core height and density affect the failure loads, the effect of cell density is more serious. Dominant factor fur failure loads of the joints under shear loading is face thickness and the effect of core height is negligible. In the joint with same dimension, failure loads vary depending on the potted area of the core, particularly in the pull-out test.

• The Korean Journal of Franchise Management
• /
• v.12 no.1
• /
• pp.45-55
• /
• 2021

Purpose: How to build the positive emotion of customer is very important, because it affects the positive attitude. Brand evidence has a significant impact on consumer behavior in terms of reinforcing consumers' perception of food service companies and differentiating them from competing brands. Thus, this study examines the effect of brand evidence on emotion (positive emotion and negative emotion), and attitude in restaurant industry. Research design, data, and methodology: This study examines the structural relationship among brand evidence, emotion, and attitude. Brand evidence divide into three sub-dimensions such as physical evidence, core service, and employee service. In order to test the purposes of this study, research model and hypotheses were developed. The questionnaire items were modified and used according to the content of this study based on previous studies. All constructs were measured by multiple items tested and developed in the previous research. The data were collected from 439 restaurant users from Seoul area were analyzed using SPSS 22.0 and SmartPLS 3.0 program. A total of 460 questionnaires were distributed and a survey was conducted for 4 weeks, and a total of 439 were used for analysis, excluding non-response data and 21 unusable response data among the collected questionnaires. Frequency analysis was conducted to identify the general characteristics of the survey subjects. To measure the reliability and validity of the measurement tools, confirmatory factor analysis was conducted. Structural model analysis was conducted to verify the research model. Result: The findings demonstrate that physical evidence, core service, employee service had positive effects on positive emotion. And core service and employee service had negative effects on negative emotion while physical evidence did not have. Also, positive emotion had positive effect on attitude and negative emotion had negative effect on attitude. Conclusions: The findings of this study provide guidelines on how to enhance competitiveness in restaurant industry through understanding brand evidence's effects on raising perceived consumer's emotion and attitude. Therefore, food service companies should establish a marketing strategy that can stimulate positive emotions through brand evidence, which is all factors related to service brands that influence consumers' evaluation of service products and purchase decision-making process.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.609-611
• /
• 2006

This paper describes a CMOS sub-bandgap reference using Pseudo-Resistors which can be widely used in flash memory, DRAM, ADC and Power management circuits. Bandgap reference circuit operates weak inversion for reducing power consumption and uses Pseudo-Resistors for reducing the chip area, instead of big resistor. It is implemented in 0.35um Standard 1P4M CMOS process. The temperature coefficient is 5ppm/$^{\circ}C$ from $40^{\circ}C$ to $100^{\circ}C$ and minimum power supply voltage is 1.2V The core area is 1177um${\times}$617um. Total current is below 2.8uA and output voltage is 0.598V at $27^{\circ}C$.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.537-538
• /
• 2008

A step-down DC-DC converter with On-chip Compensation for battery-operated portable electronic devices which are designed in 0.18um CMOS standard process. In an effort to improve low load efficiency, this paper proposes the PFM (Pulse Frequency modulation) voltage mode 1MHz switching frequency step-down DC-DC converter with on-chip compensation. Capacitor multiplier method can minimize error amplifier compensation block size by 20%. It allows the compensation block of DC-DC converter be easily integrated on a chip and occupy less layout area. But capacitor multiplier operation reduces DC-DC converter efficiency. As a result, this converter shows maximum efficiency over 87% for the output voltage of 1.8V (input voltage : 3.3V), maximum load current 500mA, and 0.14% output ripple voltage. The total core chip area is $mm^2$.