• Structural Engineering and Mechanics
• /
• 제32권3호
• /
• pp.447-457
• /
• 2009

A general analytical method for computing the joint stiffness from the sectional properties of the members that form the joint is derived using Vlasov's thin-walled beam theory. The analytical model of box T-joint under out-of-plane loading is investigated and validated using shell finite element results and experimental data. The analytical model of the T-joint is implemented in a beam finite element model using a revolute joint element. The out-of-plane displacement computed using the beam-joint model is compared with the corresponding shell element model. The results show close correlation between the beam revolute joint model and shell element model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.746-747
• /
• 2015

전동기와 부하시스템은 직결, 혹은 커플링을 통하여 연결이 된다. 이때의 동력을 전달하는 커플링, 기어, 벨트 등의 특성에 따라 전달되는 토크의 특성이 달라진다. 본 논문에서는 동력 축과 부하 축을 기구적으로 분리가 가능한 영구자석 커플링을 적용한 구동 전동기-부하시스템에 축계 시스템 해석을 위하여 유한요소 해석을 통하여 비틀림 각도 변화에 따른 전달 토크를 얻고, 이를 활용하여 기구 해석 모델에 적용해 보고, 전동기-부하 시스템의 토크 변동 가능성에 대해 알아본다.

• 소음진동
• /
• 제9권5호
• /
• pp.928-935
• /
• 1999

Vertical pumps are widely used owing to the fact that they occupy small floor space. In this type of pumps, however, the vibrational problems are very important, since, in many cases, they have less stiffness in comparison with lateral pumps. This study presents a simple solution method for calculating the natural frequencies and modes of vertical pumps. In this study, a mode of a vertical pump was developed and the nondimensional parameters for the vibrational characteristics of it were determined. Added mass was calculated for the effects of water and the transfer matrix method was used.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.207-212
• /
• 2002

The actual buckling of the railroad track structure is suspected to be a complex interaction between the vertical, lateral and torsional modes. To make the analysis tractable, however, most studies restrict themselves to either the vertical or the horizontal plane. Based on a comprehensive and realistic three-dimensional track model developed in the previous study, three dimensional buckling analysis of CWR track subjected to temperature load was performed. Using the study on buckling temperature and mode, sensitivity of track components such as tie spacing, ballast resistance, stiffness of pad-fastening system and rail size were investigated.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제5권2호
• /
• pp.39-51
• /
• 2001

This paper shows how boundary element method can be used to calculate torsion geometrical stiffness of cross-sections of various beams and airfoil profiles. Using the BEM direct formulation, the technique for determining bending and torsional geometrical characteristics of arbitrary multiply connected cross-sections is presented. The application limits of several well-known formulae on some test problems have been demonstrated and discused.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.230-237
• /
• 2000

The purpose of this study is to evaluate the dynamic behavior of highway bridge due to moving vehicle load, considering the effect of laminated rubber bearing. Dynamic behaviors of bridge considering the effect of bearings are studied with 3-dimensional bridge and vehicle models. To analyze the effect of bearings on the dynamic behaviors of superstructures of bridges, laminated rubber bearing is modeled as 3-dimensional frame element with equivalent stiffness and damping, and the models are included in the bridge analysis model. The results from the analytical models with laminated rubber bearing show a significant effects on dynamic responses and more complex vibration characteristics compared with the results from the bridge with pot bearings. Generally, larger dynamic amplification factors are obtained in the case of laminated rubber bearing, which is mainly due to the smaller torsional stiffness of the bridge with laminated rubber bearing. It can be recommended that were careful consideration on the vibration of bridges and dynamic load allowance in design are needed when adopting laminated rubber bearing.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.1-12
• /
• 1993

가상변수(假想變數)의 원리(原理)를 이용하여 공간박벽(空間薄璧) 및 뼈대구조물(構造物)의 비틂 및 횡좌굴해석(橫挫掘解析)을 수행하기 위한 접선강도(接線剛度)매트릭스들이 유도(誘導)된다. 구속(拘束)된 비틂을 고려하는 경우와 무시하는 경우 각각에 대하여, 탄성(彈性) 및 기하적(幾何的)인 강도(剛度)매트릭스들이 얻어지며 이때 축방향(軸方向) 변위(變位), 횡방향(橫方向) 처짐들, 그리고 비틂회전각에 대하여 적절한 Hermitian 다항식들을 형상함수(形狀函數)로 사용된다. 수치해석예제(數値解析例題)들을 통하여 본 연구(硏究)에서 제시한 이론(理論)의 정당성(正當性)을 입증(立證)한다.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.141-148
• /
• 2005

When one opens the door of a microwave oven during operation, microwave might leak through the clearance of the door. Present research has been motivated by the need to reduce the possible clearance by enhancing torsional stiffness of the door of the microwave oven. Static deformation of the door frame of the oven is analyzed under a door-opening force. On the basis of the topological optimization, the right flange of the door frame is shown to need reinforcing. Several types of reinforcing brackets weldable to the right flange is proposed, and their effects to the stiffness of the door frame are compared and evaluated.

• Computers and Concrete
• /
• 제10권5호
• /
• pp.489-505
• /
• 2012

This paper presents a simplified grid beam model for simulating the nonlinear response of reinforced concrete flat-plate structures. The beam elements are defined with nonlinear behavior for bending moment and torsion. The flexural stiffness and torsional strength of the beam elements are defined based on experimental data to implicitly account for slab two-way bending effects. A failure criterion that considers the interaction between the punching strength and slab flexural behavior is incorporated in the model. The effects of bond-slip of slab reinforcement on connection stiffness are examined. The proposed grid beam model is validated by simulating large-scale tests of slab-column connections subjected to concentric gravity loading and unbalanced moment. This study also determines the critical parameters for a hysteretic model used to simulate flat-plates subjected to cyclic lateral loading.

• Advances in Computational Design
• /
• 제2권4호
• /
• pp.273-281
• /
• 2017

In this work, a comparative study of multi-objective meta-heuristics (MOMHs) for optimum design of a walking tractor handlebar is conducted in order to reduce the structural mass and increase structural static and dynamic stiffness. The design problem has objective functions as maximising structural natural frequencies, minimising structural mass, bending deflection and torsional deflection with stress constraints. The problem is classified as a many-objective optimisation since there are more than three objectives. Design variables are structural shape and size. Several well established multi-objective optimisers are employed to solve the proposed many-objective optimisation problems of the walking tractor handlebar. The results are compared whereas optimum design solutions of the walking tractor handlebar are illustrated.