• 전력전자학회논문지
• /
• 제20권3호
• /
• pp.255-261
• /
• 2015

An analysis of the interleaving effect for the secondary winding distribution of a toroidal transformer is presented in this paper. The equations to calculate the leakage inductance of the toroidal transformer are derived using MMF diagrams for the different secondary winding distributions. The simulation and experimental results are provided to show the validity of the theoretical calculation.

• 한국조명전기설비학회지:조명전기설비
• /
• 제5권3호
• /
• pp.78-83
• /
• 1991

This study proposes a unified method to design toroidal transformer and its optimal design algorithm. This unified design method was derived from the fundamental equation of power on the basis of electromagnetic energy of a core and the definition of three parameters(K1, K2, KW) that influence the form of a core and the ratio of a core and coil. Accordingly this design method condenses the whole data for design of toroidal transformer to a standard variable which is the inner diameter of a core. The minimal cost, weight and volume values of the transformer were computed by means of the algorithm to search the optimal values of the parameters. Furthermore, through the CAD, the efficiency of this unified design method and optimal algorithm proposed in this paper was confirmed.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.164-172
• /
• 2014

This paper presents an analysis of a leakage inductance for a toroidal type flyback transformer. The equation to calculate the leakage inductance is derived using the MMF diagram of the transformer. The analysis for the different types of the cores and winding structures is also provided using the FEM simulation. The winding structures minimizing the leakage inductance are finally discussed from the simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.27-30
• /
• 1991

With the recent development of high performance AC superconducting wire of very small ac loss and large current carrying capacity, the possibility of superconducting air core transformer is being studied. The air core transformer has merits of no iron loss, no insulation to the core and no harmonics. But the air core transformer has large exciting current and low magnetic coupling factor. To increase the coupling factor, the transformer of toroidal shape is proposed and designed. (10KVA, 110/220V) Compared with air core transformer of solenoidal shape, the performance is improved. The exciting current occupies about 22% of the rated current.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.329-330
• /
• 2014

This paper presents an analysis of the interleaved effects for the secondary winding distribution of a toroidal transformer. The equations to calculate the leakage inductance are derived using the MMF diagram for the distributed secondary windings. The simulation and experimental results are provided to show the effect of the leakage inductance reduction.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.180-181
• /
• 2013

This paper represents an analysis of a leakage inductance for a toroidal type flyback transformer. The equation to calculate the leakage inductance is derived using its MMF diagram. The analysis for the different types of the cores and winding structures is also provided using the Maxwell 3D simulation. The winding structures minimizing the leakage inductance are finally discussed, from the simulation results.

• 한국통신학회논문지
• /
• 제13권6호
• /
• pp.501-509
• /
• 1988

토로이달코아와 상호절연된 撚線을 사용하여 30MHz~90MHz대역에 사용할 수 있는 새로운 형태의 임피던스 정합용변성기를 설계하고 제작하였다. 측정결과 전주파수대역에서 삽입손실 1.2[dB]이하, 정재파비2.0이하이었으며 100[%]의 대역폭으로 비교적 좋은 특성을 보여주고 있다. 제안한 변성기는 간편하고 제작이 용이하기 때문에 종래의 주파수절환형태의 정합회로를 대체하여 사용이 가능하리라 생각된다.

• 한국자기학회지
• /
• 제7권6호
• /
• pp.327-333
• /
• 1997

페라이트, 비정질 코아등의 고주파 연자성재료의 고주파 자기특성 데이터를 디지타이징 방법으로 얻고, 철손 및 B-H 곡선, 투자율을 자동적으로 측정할 수 있는 고주파 자기특성측정장치를 제작하였다. 본 시스템은 교류 인가를 위한 신호발생기와 전력증폭기, 인가자장을 게측하기 위한 전류측정용 저항, H 및 B 신호를 디지타이징 (digitizing)하기 위한 대역폭 500 MHz, 샘플링속도 1 Gs/s의 디지털 오실로스코프, 시스템 제어에 사용되는 GPIB 케이블 및 퍼스널 컴퓨터로 구성되었다. 자계 H 계측을 위한 전류센서로서 저항기(resistor)와 Rogowski 코일을 비교 검토한 결과 고주파 변류기 (current transformer : 이하 CT)가 주파수 특성과 노이즈 억제효과에서 보다 우수하였다. 측정시스템에 동작자속밀도 설정, 비대칭 B-H 곡선의 보정, 구형파등의 다양한 파형지원등의 기능을 부가하였다.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1591-1599
• /
• 2017

In power electronics applications which switching frequency is below audible frequency, the acoustic noise and vibration design of magnetics are as important as the efficiency. In the case of the powder core, which is widely used in grid-connected inverters, many researches have been progressed in terms of efficiency. However, there are only few research have been progressed related with acoustic noise and vibrations. In this paper, the Sendust(Fe-Si-Al) powder core material which has low magnetostriction and low core loss is analyzed in terms of acoustic noise and vibration induced by Maxwell force and magnetostriction. Three building structures such as, rectangular, toroidal, and oval shape are designed for 4kW grid-connected inverter, because magnetic properties and the audible noises of the inductor are varied by magnetic core building structures. The effects of the Maxwell force and magnetostriction behaviors varied with core shapes are analyzed by finite element method and experiments. In addition, experiment results of the inductor efficiency are presented according to core building structures.