• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.16-20
• /
• 2017

A RF-MEMS (radio-frequency microelectromechanical-system) based DPDT (double pole double throw) switch for the Ku band has been designed and analyzed for this article. The switch topology is based on the FG-CPW (finite ground-coplanar waveguide) configuration of a microstrip-transmission line. An FEM-based multiphysics solver is used for the evaluation of the spring constant, stress distribution, and pull-in voltage regarding the requirements of the switch-beam unit. The electromagnetic performance of the switch is investigated for a $675{\mu}m$ thick silicon substrate. For the operational frequency of 14.5 GHz, an insertion loss better than -0.3 dB, a return loss better than -40 dB, and input/output- and output-port isolations better than -35 dB are achieved for the switching unit.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.97-104
• /
• 2006

The geometric configuration in the weight reduction designis very required to be started from the conceptual design with low cost, high performance and quality. In this point, a structural-topological shape concerned with conceptual design of structure is important. The method used in this paper combines three optimization techniques, where the shape and physical dimensions of the structure and material distribution are hierachically optimized, with the maximum rigidity of structure and lightweight. As the results, the technology of weight reduction design is considered in designs of aluminum control arm and inner panel of door.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.464-464
• /
• 1991

We address the problem of designing a physical CATV network with switched-star topology in which the broadband interactive service is provided. There are two types of decision variables: One is where to place conduit paths, and the other is how many cable units to be installed on each link traversed by an established conduit path. Due to the serious drawback of the conventional approach partitioning the problem into two subproblems, the unified approach handled in one setting is used here to attack the whole problem without dividing into two ones. In this paper, we present a mathematical design model and propose an efficient solution method exploiting the nice structure of it. In addition to this physical design, some results on logical network configuration have also been made. Finally, computaional experiments are conducted to illustrate the efficiency of our design approach.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.593-597
• /
• 2002

The power conversion system for Fuel Cell Electric Vehicle(FCEV), technical trend, and a various type of Fuel Cell and its characteristics are presented. Especially, this paper is focused on the control methods of power conversion devices applied for the Fuel Cell Electric Vehicle, configuration of power system and operation mode of the bidirectional DC/DC converter. The prevalent topology for the power conversion systems, simulation results and development a tendency of FCEV and it's market investigations are introduced.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.222-224
• /
• 2006

To improve the drawback of LCMPPT(Limit Cycle Maximum Power Point Tracking) controller of the existing two power conversion stages, an advanced MPPT scheme of single power conversion stage is proposed in this paper. This topology is faster on the control speed by means of current control method and the system configuration is simpler. The Authors produce a battery charger by using a cost effective one-chip processor (PIC16F877A) and evaluate another application on the basis of simulation. As a result, the proposed new LCMPPT algorithm is confirmed to be stable and useful.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.502-505
• /
• 2002

A singl-phase power factor corrected converter for switched reluctance motor driving is presented to achieve sinusoidal, near unity power factor input currents. Because it combines a power factor corrected converter and a conventional asymmetric SRM driver Into one power stage, the configuration has a simple structure resulted in low cost. A prototype to drive 6/6 poles SRM employing a parking magnet is designed to evaluate the proposed topology The characteristics and operational mode will be discussed in depth, and the validity of proposed driver will be verified through the experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.242-243
• /
• 2010

This paper investigates a power supply of medium voltage with enhanced ignition characteristics for plasma torch. Series resonant half-bridge topology is presented to be a suitable ignition circuitry. The ignition circuitry is integrated into the main power conversion system of a multi-phase staggered three-level dc-dc converter with a diode front-end rectifier. The plasma torch rated for 3MW, 2kA and having the physical size of 1m long is selected to be a high enthalpy source in waste disposal system. The steady-state and transient operations of plasma torch are simulated. The parameters of Cassie-Mary arc model are calculated based on 3D magneto-hydrodynamic simulations. Circuit simulation waveform shows that the ripple of arc current can be maintained within ${\pm}10%$ of its rated value under the existence of load disturbance. This power conversion configuration provides high enough ignition voltage around 5KA during ignition phase and high arc stability under the existence of arc disturbance noise resulting in a high-performance plasma torch system.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.677-680
• /
• 2006

이 논문은 무선 센서 네트워크에서 최소 파워 구성 방법을 이용하여 에너지를 효율적으로 사용하면서 네트워크의 수명을 늘리고 지연(delay)을 줄이는 방안을 제시한다. 지금까지 에너지를 효율적으로 사용하기 위해 topology control, power-aware routing, sleep management 방법을 각각 독립적으로 연구되었는데 최소파워 구성은 위의 3가지 방법을 통합 최적화하여 에너지 효율적 사용 문제에 접근한다. 이러한 최소파워 구성 방법을 이용하여 선택적 웨이트 컨트롤(Selective weight control) 알고리즘을 제안하여 네트워크 전체 수명을 연장시키고 지연을 줄일 수 있다. 이 알고리즘은 각 노드가 주기적으로 잔류에너지를 인접노드들과 공유하여 에너지 랭크(rank)값을 유지한 상태에서 최소 에너지 경로를 사용하면서 에너지가 주위 노드들보다 작아질 때는 에너지가 많은 노드가 경로에 포함이 되도록 하여 특정 노드가 에너지 고갈되지 않고 네트워크내의 각 노드가 고르게 에너지를 소모하게 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.118-121
• /
• 1987

This paper presents a rule-based approach for automatically selecting critical contingencies in electric power systems. The rules required to perform the task are derived from inspection about results of simulation and expertise of operators. And inherent information of system, for example, topology of system configuration, and flow direction in a line by compensation theorem. etc., which are independent of operating point of system, is stored in the database using the off-line calculation. The approach was investigated using the study of a sample test system. Since it is based on the knowledge engineering technique, efficiency of selection can be improved by updating and adding the rules.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2755-2757
• /
• 2002

In this paper, we propose a now architecture for hardware implementation of digital neural network. By adopting flexible ladder-style bus and internal connection network into traditional SIMD-type digital neural network architecture, the proposed architecture enables fast processing that is based on parallelism, while does not abandon the flexibility and extensibility of the traditional approach. In the proposed architecture, users can change the network topology by setting configuration registers. Such reconfigurability on hardware allows enough usability like software simulation. We implement the proposed design on real FPGA, and configure the chip to multi-layer perceptron with back propagation for alphabet recognition problem. Performance comparison with its software counterpart shows its value in the aspect of performance and flexibility.