• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.95-98
• /
• 2003

A ZVT PWM Boost Converter is proposed to reduce current stresses and conduction losses of main switch in a conventional circuit. By attaching resonant inductor Lr1 in parallel with capacitor Cr, the resonant circulating current is diverted to the additional component and then the main switch is subjected to minimum current stresses same as those in their PWM counterparts. Moreover, the operation of the auxiliary switch in a half wave mode to prevent reverse resonant energy from freewheeling can be able to lessen the conduction losses. The operation principles of the proposed converters are analyzed using the PWM boost converter topology as an example. Theoretically analysis and experimental results verify the validity of the boost converter topology with the proposed circuit.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1356-1363
• /
• 2009

The aim of this research is to construct eigenfrequency optimization codes for plates with Arbitrary Rank Microstructures. From among noise factors, resonance sound is main reason for floor's solid noise. But, Resonance-elusion design codes are not fixed so far. Besides, The prediction of composite material's capability and an resonance elusion by controlling natural frequency of plate depend on designer's experiences. In this paper, First, using computer program with arbitrary rank microstructure, variation on composite material properties is studied, and then natural frequency control is performed by plate topology optimization method. The results of this study are as followed. 1) Programs that calculate material properties along it's microstructure composition and control natural frequency on composite material plate are coded by Homogenization and Topology Optimization method. and it is examined by example problem. 2) Equivalent material properties, calculated by program, are examined for natural frequency. In this paper, Suggested programs are coded using $Matlab^{TM}$, Feapmax and Feap Library with Homogenization and Topology Optimization method. and Adequacy of them is reviewed by performing the maximization or minimization of natural frequency for plates with isotropic or anisotropic materials. Since the programs has been designed for widely use. If the mechanism between composite material and other structural member is identified, extension application may be possible in field of structure maintenance, reinforcement etc. through application of composite material.

• Steel and Composite Structures
• /
• 제37권6호
• /
• pp.663-678
• /
• 2020

This paper proposes a novel topology optimization method generating multiple materials for external linear plane crack structures based on the combination of IsoGeometric Analysis (IGA) and eXtended Finite Element Method (X-FEM). A so-called eXtended IsoGeometric Analysis (X-IGA) is derived for a mechanical description of a strong discontinuity state's continuous boundaries through the inherited special properties of X-FEM. In X-IGA, control points and patches play the same role with nodes and sub-domains in the finite element method. While being similar to X-FEM, enrichment functions are added to finite element approximation without any mesh generation. The geometry of structures based on basic functions of Non-Uniform Rational B-Splines (NURBS) provides accurate and reliable results. Moreover, the basis function to define the geometry becomes a systematic p-refinement to control the field approximation order without altering the geometry or its parameterization. The accuracy of analytical solutions of X-IGA for the crack problem, which is superior to a conventional X-FEM, guarantees the reliability of the optimal multi-material retrofitting against external cracks through using topology optimization. Topology optimization is applied to the minimal compliance design of two-dimensional plane linear cracked structures retrofitted by multiple distinct materials to prevent the propagation of the present crack pattern. The alternating active-phase algorithm with optimality criteria-based algorithms is employed to update design variables of element densities. Numerical results under different lengths, positions, and angles of given cracks verify the proposed method's efficiency and feasibility in using X-IGA compared to a conventional X-FEM.

• Journal of Communications and Networks
• /
• 제14권3호
• /
• pp.319-335
• /
• 2012

In this study, we design an applicable model enabling internet protocol television (IPTV) service providers to use a virtual network (VN) for IPTV service delivery. The model addresses the guaranteed service delivery, cost effectiveness, flexible control, and scalable network infrastructure limitations of backbone or IP overlay-based content networks. There are two major challenges involved in this research: i) The design of an efficient, cost effective, and reliable virtual network topology (VNT) for IPTV service delivery and the handling of a VN allocation failure by infrastructure providers (InPs) and ii) the proper approach to reduce the cost of VNT recontruction and reallocation caused by VNT allocation failure. Therefore, in this study, we design a more reliable virtual network topology for solving a single virtual node, virtual link, or video server failure. We develop a novel optimization objective and an efficient VN construction algorithm for building the proposed topology. In addition, we address the VN allocation failure problem by proposing VNT decomposition and reconstruction algorithms. Various simulations are conducted to verify the effectiveness of the proposed VNT, as well as that of the associated construction, decomposition, and reconstruction algorithms in terms of reliability and efficiency. The simulation results are compared with the findings of existing works, and an improvement in performance is observed.

• 한국정보과학회논문지:정보통신
• /
• 제37권3호
• /
• pp.167-174
• /
• 2010

최근에 비 구조적 피어투피어 시스템을 위해 분산적으로 재결정위상을 구성하는 위상 제어 프로토콜이 제안되었다[1]. 본 논문에서는 재결정위상이라고 불리는 이러한 계층적 위상이 척도 없는 거듭제곱 법칙 망임을 보인다. 우리는 재결정 위상의 분산된 구성을 위한 알고리즘의 프로세스를 모형화 하고, 평균 장 점근법(Mean field Approximation)과 연속체 이론(Continuum theory)에 근거를 두고 분석하여, 구성된 재결정 망이 척도 없는 망임을 보였다. 위상제어 알고리즘을 따르는 각 노드는 더 선호하는 노드에 대한 연결을 추가하고, 가장 비선호하는 노드에 대한 연결을 제거한다. 다시 말해, 알고리즘에 따라, 각 피어는 자신이 알고 있는 피어들 중에서 최고의 적중률(또는 검색 능력 혹은 선호도)을 가지고 있는 노드들과 연결을 추가하고, 최저의 적중률을 가진 노드들과의 연결을 끊는다. 이것은 비구조적 피어투피어 망에서 재결정 위상을 구성하기 위한 지역적인 프로세스를 실제적으로 표현한다. 우리는 차수의 분포를 분석적으로 유도한다. 분석 결과, 만들어지는 재결정 위상은 척도 없는 망이며, 이것의 거듭제곱 법칙의 지수$\gamma$는 3 이다.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1605-1614
• /
• 2009

The technique of simultaneous localization and mapping is the most important research topic in mobile robotics. In the process of building a map in its available memory, the robot memorizes environmental information on the plane of grid or topology. Several approaches about this technique have been presented so far, but most of them use mapping technique as either grid-based map or topology-based map. In this paper we propose a frame of solving the SLAM problem of linking map covering, map building, localizing, path finding and obstacle avoiding in an automatic way. Some algorithms integrating grid and topology map are considered and this make the SLAM performance faster and more stable. The proposed scheme uses an occupancy grid map in representing the environment and then formulate topological information in path finding by A${\ast}$ algorithm. The mapping process is shown and the shortest path is decided on grid based map. Then topological information such as direction, distance is calculated on simulator program then transmitted to robot hardware devices. The localization process and the dynamic obstacle avoidance can be accomplished by topological information on grid map. While mapping and moving, pose of the robot is adjusted for correct localization by implementing additional pixel based image layer and tracking some features. A laser range finer and electronic compass systems are implemented on the mobile robot and DC geared motor wheels are individually controlled by the adaptive PD control method. Simulations and experimental results show its performance and efficiency of the proposed scheme are increased.

• 해양환경안전학회지
• /
• 제24권2호
• /
• pp.238-245
• /
• 2018

본 논문은 직류전동기 속도제어를 위해 매트릭스 컨버터의 적용 가능성을 제안한다. 매트릭스 컨버터는 크게 직접 매트릭스 컨버터와 간접 매트릭스 컨버터로 나뉘는데 본 논문에서는 다양한 출력 단을 구성할 수 있어 향후 많은 활용이 예상되는 간접 매트릭스 컨버터를 이용하였다. 제안한 방식은 기존의 방식보다 입력 전류의 파형을 개선하고, 부피가 크고 비용이 많이 들며 수명단축의 원인이 되는 에너지 저장 요소를 가지지 않는 이점이 있다. 시뮬레이션을 통하여 기존 방식과 본 논문에서 제안하는 방식의 특징을 비교 분석하여 제안한 방식의 유효성을 입증하였다. 속도제어, 토크제어, 부하전류제어에서는 유사한 성능을 보이며, 입력전류는 정류단의 스위치를 직접 제어함으로써 정현파와 유사하게 제어되기 때문에 고조파가 크게 감소되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1767-1770
• /
• 2003

This paper proposes an efficient network architecture for reflective memory system (RMS). Using this architecture, the time for broadcasting a shared-data to all nodes can be significantly shortened. The device named topology conversion switch (TCS) is implemented to realize the network architecture. The implemented TCS is applied to the ethernet based real time control network (ERCnet) to evaluate the performance.

• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.50-59
• /
• 1997

A wireless LAN medical information transmission system is useful for patients who need mobility in a local area environment. This paper proposes a method using WLAN(wireless local area network) and implements a stand-alone system with MAC(meidum access control) layer protocol referenced IEEE 802.11 draft standard. The system consists of a 8bit-microprocessor which handles media access control protocol and a WL100(GEC Plessey) chip which takes care of phsical layer specific routines and uses a RF module DE6003(GEC Plessey). The major features of the implemented system are the CSMA/CA protocol used a consecutive DATA-ACK trasmission method which yields more effective bandwidth allocation for asyncronous traffic transmission and the modified PCF protocol for time-bounded traffic transmission, which operates in ad-hoc network topology apart from IEEE 802.11 draft standard confirm PCF mode operate in infrastruture topology.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권3호
• /
• pp.141-146
• /
• 2001

This paper presents a one digital controller two topology PWM DC-DC converter that controls, simultaneously, the separate Buck converter and boost converter with the different specification by using an inexpensive and efficient 8 bit micro-controller. One timer interrupt is used for the detection of output feedback voltage, and other two timer interrupts are used for the generation of PWM waveform for Buck and Boost converter. The control characteristics of one digital controller two topology PWM DC-DC converter is validated by experimental results.