• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.389-392
• /
• 2004

A recent unusual change in the weather is formed as a localized heavy rain in a short time. This phenomenon has caused a flash flood, and flash floods extensively have damaged human lives many times. In large river's case, the extent of loss of lives and properties has been decreased through the flood warning system by flood control stations of each stream. However, the extent of damage in other small rivers has increased reversely. Therefore, it is necessary to establish a new flood warning system against flash floods instead of the existing flood warning system. It is a specific character that the damage from flash floods in mountain streams brings much more loss of lives than large river's flood. The purpose of this study is calculating the characteristic of flash floods in streams, analyzing topographical characteristics of water basin through applying GIS techniques with the calculation as mentioned above and researching what topographical conditions have influence on hydrological flash floods in water basin. The flash flood prediction model we used is made by GIUH (geomorphoclimatic instantaneous unit hydrograph) with hydrologic-topographical technology. As applying the flash flood prediction model, this is a procedure for calculating topographical information in basin: we made a topological data up out of database with utilizing GIS, and we also produced a DEM (digital elevation model) and used it as a topographical data for determining amount of flash floods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.1
• /
• pp.33-43
• /
• 2004

A carbon budget model was constructed and analyzed for the Bangjukpo surf zone ecosystem in southern Korea by using the NETWRK. The model consists of 11 living and 1 non-living groups. Using boxes and arrows, a topological map was created to depict biomasses of each group and exchange rates between them. The system includes primary producers of phytoplankton and benthic algae, primary consumers of particle feeding zooplankton, carnivorous zooplankton, meiobenthos, malacostracans and bivalves, and top consumers of detrivorous, omnivorous, carnivorous and piscivorous fishes. The surf zone ecosystem was analyzed by means of network analysis, showing total system throughput of $574\;gCm^{-2}yr^{-1},$ development capacity of $1,876\;gCm^{-2}yr^{-1},$ ascendancy value of $768\;gCm^{-2}yr^{-1},$ Finn cycling index of $4.4\%$ and internal relative ascendancy of $27\%.$ These results were compared with similar data from other systems.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2009-2016
• /
• 2008

The relationship between thermal decomposition temperature and structure of a new data set of eighty monomers of different polymers were studied by multiple linear regression (MLR). The stepwise method was used in order to variable selection. The best descriptors were selected from over 1400 descriptors including; topological, geometrical, electronic and hybrid descriptors. The effect of number of descriptors on the correlation coefficient (R) and F-ratio were considered. Two models were suggested, one model having four descriptors ($R^2$ = 0.894, $Q^2_{cv}$ = 0.900, F = 172.1) and other model involving 13 descriptors ($R^2$ = 0.956, $Q^2_{cv}$ = 0.956, F = 125.4).

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.12-20
• /
• 1991

The informations of ship structural design have been represented as the form various drawing plants, but to enhance the design productivity, it is necessary to utilize the advanced technologies such as CAD system and database management system. In this study, efforts are focused on the data modelling of those informations of midship configuration and attribute for the integration of ship structural design programs through database system. As actual example, midship configuration of bulk carrier was visualized by computer graphics. Relational data model is employed and topological informations is used for the best treatment of geometries representing structural arrangement. RDBMS 'ORACLE' was used for the implementation of the results.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.364-365
• /
• 2003

모델에 입력되는 지형자료의 형태는 좌표별 고도가 체계적으로 정리된 DEM(Digital Elevation Model)형태를 사용할 수 있으며, 과거에는 이러한 지형자료를 얻기 위해 대상지역의 지형도 중 등고선을 대상으로 좌표별 고도수치를 정리하여 구축하거나, 섬세한 지형자료를 구축하고자 할 경우 각 고도별 등고선자료를 scan한 후에 각 등고선별 고도자료의 위상관계를 설정해 주는 작업을 진행하였으나, 두 방법 모두 상당량의 수정작업과 반복작업이 요구되는 단점을 갖고 있었다. 그러나 국립지리원 주도로 1998년 9월부터 시작된 NGIS(National Geogralhic Information Sydtem)사업에 의해 구축된 수치지도를 이용하여 등고선별 고도자료를 추출하고, 이를 가공하여 모델의 입력자료로 활용하는 방법이 최근에 소개되고 있으며, 지형자료의 구축에 소요되는 시간 및 정확한 자료를 구축할 수 있다. (중략)

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.56.2-56.2
• /
• 2013

We study the three-dimensional genus topology of large-scale structure using the CMASS Data Release 11 sample of the SDSS-III Baryon Oscillation Spectroscopic Survey (BOSS). The CMASS sample yields a genus curve that is characteristic of one produced by Gaussian random-phase initial conditions. The data thus supports the standard model of inflation where random quantum fluctuations in the early universe produced Gaussian random-phase initial conditions. Modest deviations in the observed genus from random phase are as expected from the nonlinear evolution of structure. We construct mock SDSS CMASS surveys along the past light cone from the Horizon Run 3 (HR3) N-body simulations, where gravitationally bound dark matter subhalos are identified as the sites of galaxy formation. We study the genus topology of the HR3 mock surveys with the same geometry and sampling density as the observational sample, and the observed genus topology to be consistent with LCDM as simulated by the HR3 mock samples.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.03a
• /
• pp.281-287
• /
• 1999

Decision class analysis (DCA) is viewed as a classification problem where a set of input data (situation-specific knowledge) and output data(a topological leveled influence diagram (ID)) is given. Situation-specific knowledge is usually given from a decision maker (DM) with the help of domain expert(s). But it is not easy for the DM to know the situation-specific knowledge of decision problem exactly. This paper presents a methodology for sensitivity analysis of DCA under incomplete information. The purpose of sensitivity analysis in DCA is to identify the effects of incomplete situation-specific frames whose uncertainty affects the importance of each variable in the resulting model. For such a purpose, our suggested methodology consists of two procedures: generative procedure and adaptive procedure. An interactive procedure is also suggested based the sensitivity analysis to build a well-formed ID. These procedures are formally explained and illustrated with a raw material purchasing problem.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.3
• /
• pp.184-192
• /
• 2001

In this paper we present a remeshing algorithm for irregular meshes with boundaries. The irregular meshes are approximated by regular meshes where the topological regularity is essential for the multiresolutional analysis of the given meshes. Normal meshes are utilized to reduce the necessary data size at each resolution level of the regularized meshes. The normal mesh uses one scalar value, i.e., normal offset value which is based on the regular rule of a uniform subdivision, while other remeshing schemes use one 3D vector at each vertex. Since the normal offset cannot be properly used for the boundaries of meshes, we use a combined subdivision scheme which resolves a problem of the proposed normal offset method at the boundaries. Finally, we show an example to see the effectiveness of the proposed scheme to reduce the data size of a mesh model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.260-268
• /
• 2007

Demand for the use of 3D CAD DMU systems over the Internet environment has been increased. However, transmission of commercial 3D kernels has delayed the communication effectiveness due to the kernel size. Light weight CAD geometric kernel design methodology is required for rapid transmission in the distributed environment. In this paper, an assembly data structure suitable for the top-down and bottom-up assembly models has been constructed. Part features are stored without a hierarchy so that they are created and saved in no particular order. In particular, this paper proposes a new assembly representation model, called multi-level assembly representation (MAR), for the PDM based assembly DMU system. Since the geometric kernel retains assembly hierarchy and topological information, it is applied to the web-viewer for the PDM based DMU system. Effectiveness of the proposed geometric kernel is confirmed through various case studies.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1051-1059
• /
• 2014

In this paper, we propose an intelligent situation recognition model by collecting and analyzing multiple sensor signals. Multiple sensor signals are collected for fixed time window. A training set of collected sensor data for each situation is provided to K2-learning algorithm to generate Bayesian networks representing causal relationship between sensors for the situation. Statistical characteristics of sensor values and topological characteristics of generated graphs are learned for each situation. A neural network is designed to classify the current situation based on the extracted features from collected multiple sensor values. The proposed method is implemented and tested with UCI machine learning repository data.