• 제목/요약/키워드: Topographic normalization

검색결과 12건 처리시간 0.037초

2019 강릉-동해 산불 피해 지역에 대한 PlanetScope 영상을 이용한 지형 정규화 기법 분석 (Analysis on Topographic Normalization Methods for 2019 Gangneung-East Sea Wildfire Area Using PlanetScope Imagery)

  • 정민경;김용일
    • 대한원격탐사학회지
    • /
    • 제36권2_1호
    • /
    • pp.179-197
    • /
    • 2020
  • 지형 정규화 기법은 영상 촬영 시의 광원, 센서 및 지표면 특성에 따라 발생하는 밝기값 상의 지형적인 영향을 제거하는 방법으로, 지형 조건으로 인해 동일 피복의 픽셀들이 서로 다른 밝기값을 지닐 때 그 차이를 감소시킴으로써 평면 상의 밝기값과 같아 보이도록 보정한다. 이러한 지형적인 영향은 일반적으로 산악 지형에서 크게 나타나며, 이에 따라 산불 피해 지역 추정과 같은 산악 지형에 대한 영상 활용에서는 지형 정규화 기법이 필수적으로 고려되어야 한다. 그러나 대부분의 선행연구에서는 중저해상도의 위성영상에 대한 지형 보정 성능 및 분류 정확도 영향 분석을 수행함으로써, 고해상도 다시기 영상을 이용한 지형 정규화 기법 분석은 충분히 다루어지지 않았다. 이에 본 연구에서는 PlanetScope 영상을 이용하여 신속하고 정확한 국내 산불 피해 지역 탐지를 위한 각 밴드별 최적의 지형 정규화 기법 평가 및 선별을 수행하였다. PlanetScope 영상은 3 m 공간 해상도의 전세계 일일 위성영상을 제공한다는 점에서 신속한 영상 수급 및 영상 처리가 요구되는 재난 피해 평가 분야에 높은 활용 가능성을 지닌다. 지형 정규화 기법 비교를 위해 보편적으로 이용되고 있는 7가지 기법을 구현하였으며, 토지 피복 구성이 상이한 산불 전후 영상에 모두 적용, 분석함으로써 종합적인 피해 평가에 활용될 수 있는 밴드 별 최적 기법 조합을 제안하였다. 제안된 방법을 통해 계산된 식생 지수를 이용하여 화재 피해 지역 변화 탐지를 수행하였으며, 객체 기반 및 픽셀 기반 방법 모두에서 향상된 탐지 정확도를 나타내었다. 또한, 화재 피해 심각도(burn severity) 매핑을 통해 지형 정규화 기법이 연속적인 밝기값 분포에 미치는 효과를 확인하였다.

Landsat 7 ETM+ 영상과 ASTER GDEM 자료를 이용한 제주도 지역의 지형보정 효과 분석 (Assessment of Topographic Normalization in Jeju Island with Landsat 7 ETM+ and ASTER GDEM Data)

  • 현창욱;박형동
    • 대한원격탐사학회지
    • /
    • 제28권4호
    • /
    • pp.393-407
    • /
    • 2012
  • 본 연구에서는 광학 원격탐사 영상의 획득 시 태양의 고도 및 방위가 대상 지역의 지형기복과 결합하여 나타나는 영향 및 다수의 시기에 걸쳐 획득한 영상을 비교분석하는 경우 영상 촬영시기의 차이로 인한 태양의 위치변화와 지형기복이 결합하여 나타나는 영향에 대한 보정을 시도하였다. 한라산과 다수의 분석구가 분포하는 제주도를 대상으로 Landsat 7 ETM+ 영상과 ASTER GDEM 지형자료를 사용하여 국지적조도의 모델링 시 커널의 크기를 $3{\times}3$, $5{\times}5$, $7{\times}7$, $9{\times}9$ 화소로 변화시키며 Lambertian 보정기법인 cosine 보정법과 비 Lambertian 보정기법인 c-보정법을 적용하고 보정기법 및 커널 크기에 대한 지형보정 효과를 분석하였다. 개별 영상의 육상지역에 대하여 보정을 수행한 결과 커널의 크기 $7{\times}7$을 적용한 c-보정법을 사용하였을 때에 보정효과가 가장 우수한 것으로 평가되었고, 대상지역을 ISODATA 무감독분류법을 이용하여 선택된 산림지역에 한정하여 지형보정을 수행한 경우에는 커널의 크기 $9{\times}9$를 적용한 c-보정법을 사용하였을 때에 가장 우수한 결과가 도출되었으며 다양한 지표피복이 혼합된 대상지역 대한 보정보다 효과가 큰 것으로 평가되었다. 다시기 영상의 경우 세 시기에 획득된 영상에 대하여 각각 지형보정을 수행한 후 상대적 방사도 보정을 적용하였을 때 지형보정을 수행하지 않은 경우와 비교하여 적외선 파장영역에서는 보다 균질한 반사도로 방사보정이 이루어졌으며 가시광 파장영역에서는 원영상의 반사도 패턴이 잘 보존된 결과가 도출되었다. 이상의 결과로부터 주변 지형으로부터 반사되는 에너지와 불완전한 대기보정으로 인한 잔류 대기영향을 고려하는 c-보정법을 적용하는 경우 cosine 보정법보다 우수한 지형보정 효과가 나타나며 수치표고모델에 내재된 수평과 수직방향 오차 및 위성영상과의 정합오차의 영향을 감소시기키 위하여 국지적 조도의 모델링 시 커널의 크기를 증가시키는 경우 지형보정의 효과가 증대되는 것으로 판단된다.

A Study on the Land Cover Characteristics in Korea : Application of Hybrid Classifier and Topographic Normalization

  • Jeon, Seong-Woo;Jung, Hui-Cheul;Chung, Sung-Moon;Lee, Sang-Ik
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.271-280
    • /
    • 1999
  • The topographical effect resulted from rugged terrains and inhomogeneous spectral characteristics due to the complexly mixed land cover condition of Korea substantially lower the remotely sensed land cover classification accuracy In this study, a topographic correction method using digital elevation model to alleviate the topographic effects. To deal with inhomogeneous spectral characteristic, a hybrid classifier with inclusion of prior probabilities was introduced. This investigation concluded that the topographical normalization and hybrid classification with prior probabilities are effective on rugged landscape. The overall and average classification accuracies were improved by 0.92% and 1.016% respectively. The most substantial and noticeable accuracy improvement was observed in forest areas.

  • PDF

A Correction Approach to Bidirectional Effects of EO-1 Hyperion Data for Forest Classification

  • Park, Seung-Hwan;Kim, Choen
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.1470-1472
    • /
    • 2003
  • Hyperion, as hyperspectral data, is carried on NASA’s EO-1 satellite, can be used in more subtle discrimination on forest cover, with 224 band in 360 ?2580 nm (10nm interval). In this study, Hyperion image is used to investigate the effects of topography on the classification of forest cover, and to assess whether the topographic correction improves the discrimination of species units for practical forest mapping. A publicly available Digital Elevation Model (DEM), at a scale of 1:25,000, is used to model the radiance variation on forest, considering MSR(Mean Spectral Ratio) on antithesis aspects. Hyperion, as hyperspectral data, is corrected on a pixel-by-pixel basis to normalize the scene to a uniform solar illumination and viewing geometry. As a result, the approach on topographic effect normalization in hyperspectral data can effectively reduce the variation in detected radiance due to changes in forest illumination, progress the classification of forest cover.

  • PDF

Availability of Normalized Spectra of Landsat/TM Data by Their Band Sum

  • Ono, Akiko;Kajiwara, Koji;Honda, Yoshiaki;Ono, Atsuo
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.573-575
    • /
    • 2003
  • In satellite spectra, Though the magnitude varies with intensity of sunstroke, dip angle of land so on, the shape is less deformed with these effects. from this point of view, we have developed a spectral shape-dependent analysis utilizing a normalization procedure by the spectral integral and applied it to Landsat/TM spectra. Inevitable topographic and atmospheric effects can be suppressed. The correction algorithm is very simple and timesaving and the suppression of topographic effects is especially effective. Normalized band 4 is almost linear to NDVI values, and is available to the vegetation index.

  • PDF

GENERATION OF AIRBORNE LIDAR INTENSITY IMAGE BY NORMALIZAING RANGE DIFFERENCES

  • Shin, Jung-Il;Yoon, Jong-Suk;Lee, Kyu-Sung
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
    • /
    • pp.504-507
    • /
    • 2006
  • Airborn Lidar technology has been applied to diverse applications with the advantages of accurate 3D information. Further, Lidar intensity, backscattered signal power, can provid us additional information regarding target's characteristics. Lidar intensity varies by the target reflectance, moisture condition, range, and viewing geometry. This study purposes to generate normalized airborne LiDAR intensity image considering those influential factors such as reflectance, range and geometric/topographic factors (scan angle, ground height, aspect, slope, local incidence angle: LIA). Laser points from one flight line were extracted to simplify the geometric conditions. Laser intensities of sample plots, selected by using a set of reference data and ground survey, werethen statistically analyzed with independent variables. Target reflectance, range between sensor and target, and surface slope were main factors to influence the laser intensity. Intensity of laser points was initially normalized by removing range effect only. However, microsite topographic factor, such as slope angle, was not normalized due to difficulty of automatic calculation.

  • PDF

인공위성 레이더(SAR) 영상자료에 있어서 지형효과 저감을 위한 방사보정 (Topographic Normalization of Satellite Synthetic Aperture Radar(SAR) Imagery)

  • 이규성
    • 대한원격탐사학회지
    • /
    • 제13권1호
    • /
    • pp.57-73
    • /
    • 1997
  • 본 연구는 산악 지형의 레이더(SAR) 영상자료에서 흔히 볼 수 있는 지형의 기복에 의한 화소값의 왜곡 보정과 관련된 것이다. 연구 자료로는 RADARSAT 위성에서 얻어진 서울 남쪽 관악산과 안양 지역의 SAR 영상자료를 이용하였고, 영상자료의 보정을 위하여 SAR 영상과 유사 한 해상력을 갖춘 수치고도자료(digital elevation model)를 제작하였다. 레이더 영상자료는 먼저 각 화소가 가지고 있는 기하학적 왜곡을 보정하여 정확한 지도좌표에 등록함으로써, 수치고도자 료로부터 각 화소 지점의 구체적인 지형적 특성에 관한 자료를 산출하였다. 영상의 각 화소값에 미치는 지형적 영향을 분석하기 위한 기하학적 인자로서 각 지점에 입사되는 레이더파와 경사면 의 연직선이 이루는 유효입사각(local incidence angle)을 산출하였다. 수치지도로 제작된 임상도 를 이용하여 동일한 임분특성을 가지고 있는 산림내에서 얻어지는 레이더 반사치와 유효입사각의 관계를 분석하였다. 영상자료의 지형효과 보장은 실험적인 방법에 의하여 수행되었는데, 유효입사 각과 레이더 반사치와의 관계에서 도출된 지형에 의한 영향을 나타내는 수식을 적용하였다. 보정 결과는 육안에 의한 영상의 비교와 함께 현지자료를 이용하여 검증하였다.

A STUDY ON INTER-RELATIONSHIP OF VEGETATION INDICES USING IKONOS AND LANDSAT-7 ETM+ IMAGERY

  • Yun, Young-Bo;Lee, Sung-Hun;Cho, Seong-Ik;Cho, Woo-Sug
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.852-855
    • /
    • 2006
  • There is an increasing need to use data from different sensors in order to maximize the chances of obtaining a cloud-free image and to meet timely requirements for information. However, the use of data from multiple sensor systems is depending on comprehensive relationships between sensors of different types. Indeed, a study of inter-sensor relationships is well advanced in the effective use of remotely sensed data from multiple sensors. This paper was concerned with relationships between sensors of different types for vegetation indices (VI). The study was conducted using IKONOS and Landsat-7 ETM+ images. IKONOS and Landsat-7 ETM+ image of the same or about the same dates were acquired. The Landsat-7 ETM+ images were resampled in order to make them coincide with the pixel sizes of IKONOS. Inter-relationships of vegetation indices between images were performed using at-satellite reflectance obtained by converting image digital number (DN). All images were applied to topographic normalization method in order to reduce topographic effect in digital imagery. Also, Inter-sensor model equations between two sensors were developed and applied to other study region. In the result, the relational equations can be used to compute or interpret VI of one sensor using the VI of another sensor.

  • PDF

인공위성 화상데이터를 이용한 솔껍질깍지벌레 피해지역의 추출기법에 관한 연구 (A Study on the Extraction of the Matsucoccus Thunbergianae Miller et Park Damaged Area from Satellite Image Data)

  • 안기원;이효성;서두천
    • 한국측량학회지
    • /
    • 제15권2호
    • /
    • pp.287-298
    • /
    • 1997
  • 본 연구에서는 Landsat-5 TM 데이터를 사용하여, 경상남도 남해군 일대를 대상으로 솔껍질깍지벌레 피해지역과 경년변화를 효율적으로 추출할 수 있는 기법을 연구 제시하였다. 또한 피해상황을 파악하여 피해지역의 지형적 상관관계를 규명하고, 피해확산방향을 예측하여, 인공위성 화상데이터가 산림의 병충해 감시에 유용함을 입증함과 아울러, 효과적인 방제를 위한 기초자료를 제공하는데 그 목적이 있다. 연구결과 수치표고화상을 이용한 BRCT (Backwards Radiance Correction Transformation) 기법을 통하여 지형영향으로 인한 그림자지역을 효과적으로 제거함으로서, 피해지역 추출시 그 유효성을 높일 수 있었다 피해지역과 경년변화 화상을 작성, 분석하여 피해 초기에는 남서사면, 경사도 $7-18^\circ$,산지 최고 표고의 50~70%의 위치에서 집중적으로 발생하여 주로 바람방향(북동방향) 피해가 확대됨을 알 수 있었다.

  • PDF

Change Analysis of Forest Area and Canopy Conditions in Kaesung, North Korea Using Landsat, SPOT and KOMPSAT Data

  • Lee, Kyu-Sung;Kim, Jeong-Hyun
    • 대한원격탐사학회지
    • /
    • 제16권4호
    • /
    • pp.327-338
    • /
    • 2000
  • The forest conditions of North Korea has been a great concern since it was known to be closely related to many environmental problems of the disastrous flooding, soil erosion, and food shortage. To assess the long-term changes of forest area as well as the canopy conditions, several sources of multitemporal satellite data were applied to the study area near Kaesung. KOMPSAT-1 EOC data were overlaid with 1981 topographic map showing the boundaries of forest to assess the deforestation area. Delineation of the cleared forest was performed by both visual interpretation and unsupervised classification. For analyzing the change of forest canopy condition, multiple scenes of Landsat and SPOT data were selected. After preprocessing of the multitemporal satellite data, such as image registration and normalization, the normalized difference vegetation index (NDVI) was derived as a representation of forest canopy conditions. Although the panchromatic EOC data had radiometric limitation to classify diverse cover types, they can be effectively used t detect and delineate the deforested area. The results showed that a large portion of forest land has been cleared for the urban and agricultural uses during the last twenty years. It was also found that the canopy condition of remaining forests has not been improved for the last twenty years. It was also found that the canopy condition of remaining forests has not been improved for the last twenty years. Possible causes of the deforestation and the temporal pattern of canopy conditions are discussed.