• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.27-34
• /
• 1993

The construction of the accurate, economic topographic information for a sorts of work and a base facilities of country is one of the very important subjects. In this paper, Global network which include south KOREA and Regional network which include Chung-Nam/Chung-Buk provinces were designed, obtained WGS84 coordinates of control points in networks by GPS. The coefficients of transformation between WGS84 coordinates and Bessel coordinates in consideration of geoid undulations was derived by 7-parameter method. Also, the efficiency of 7-parameter method was proved through successful application of T.M. and U.T.M projection for the precise mapping, and the effectiveness of the aquisition of three dimensional topographic information by GPS was suggested.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.174-187
• /
• 2011

The flowed soil is able to be estimated from topographic data of before and after the debris flow. However, it is often difficult to obtain airborne LiDAR data before the debris flow area. Thus, this study tries to develop a topographic restoration method that can provide spatial distribution of flowed soil and reconstruct the topography before the debris flow using airborne LiDAR data. The topographic restoration method can express a numerical formula induced from a Gaussian mixture model after extracting the cross sections of linear or non-linear in debris flowed area. The topographic restoration method was verified by two ways using airborne LiDAR data of before and after the debris flow. First, each cross section extracted from the debris flow sites to restore the topography was compared with airborne LiDAR data of before the debris flow. Also, the topographic data produced after the topographic restoration method applied to the debris flow sites was verified by airborne LiDAR DEM. Verifying the results of the topographic restoration method, overall fitting accuracy showed high accuracy close to 0.5m.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.393-398
• /
• 2004

It is transformed map data of different coordinate system into unique system and We triedto make topographic map on non-accessible area. We transformed Russian map coordinates(Krassovsky, G-K projection) intoWGS-84, TM projection and assessed accuracy. The RMSE(in East and West bearings : ${\pm}$13.67m, in North and South bearings ： ${\pm}$14.67m) using only SCP(Survey Control Point) is more accurate than that(in East and West bearings ： ${\pm}$24.26m, in North and South bearings : ${\pm}$25.32m) using SCP, intersection of road, bridge. Exterior orientation parameters are estimated using rigorous modelling and GCPs are classified with SCP, intersection of road, bridge. Rigorous modelling is performed with each classified GCP. The modelling result usingonly SCP(in East and West bearings : ${\pm}$13.53m, in North and South bearings ： ${\pm}$14.22m) is more accurate than that using intersection of road(in East and West bearings ： ${\pm}$16.l1m, in North and South bearings： ${\pm}$23.85m), bridge(in East and West bearings : ${\pm}$17.21m, in North and South bearings : ${\pm}$21.82m). The results means that SCP is more accurate than intersection of road, bridge because of edit to generate map. therefore, SCP is suitable for object of GCP in paper map(1:50,000). Geographic information on non-accessible area and analysis is performed. The results of stereoscopic plotting is well matched old map data on road, railroad but, many objects are generally editted. It is possible to update on new objects(building, tributary ‥‥etc). Ability of description using SPOT-5(stereo) is more than features and items included in 1:50,000 topographic map. Therefore, it is possible to make large scale map than 1:50,000 topographic map using SPOT-5 imagery. But, there are many problems(accurate GCPs, obtain of high resolution stereoscopic satellite imagery in a period ‥‥ etc) to make topographic map on non-accessible area. It is actually difficult to solve these problems. therefore, it is possible to update 1:50,000 topographic map in part of topographic map generation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.83-93
• /
• 2008

The topographic effect is one of the most important component in the solution of the geodetic boundary value problem (geodetic BVP). Therefore, topographic effect should be considered properly for developing the precise geoid model, especially for the area where contains many mountains like Korea. The selection of gravity reduction method in the context of the precise geoid determination depends on the magnitude of its indirect effect, the smoothness and magnitude of the reduced gravity anomalies, and their related geophysical interpretation. In this study, Korean digital elevation model with 100m resolution was constructed and topographic effect was calculated by three reduction methods as like Helmert condensation method and RTM method and Airy-isostatic reduction method. Through the analysis of computation results, we can find that RTM reduction method is the best optimal method and the results shows that gravity anomaly and indirect effect of geoidal height are $0.660{\pm}13.009mGal$, $-0.004{\pm}0.131m$ respectively and it is the most gentle slow of the three methods. Through this study, it was found that the RTM method is better suitable for calculating topographic effect precisely in context of precise geoid determination in Korea than other reduction methods.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.49-55
• /
• 2006

Nowadays, flood hazard maps have been generated to minimize the damages from the flooding. To generate such flood hazard maps, LiDAR data can be used as data source with higher data accuracy. LiDAR data, however, requires relatively higher cost and longer processing time. In this background, this study proposed DEM generation using NGIS digital topographic maps. For that, breaklines were processed to count directions of water flows. In addition, the river profile data, unique data source to represent real topography of the river area, were integrated to the breaklines to generate DEM. City of Kuri in Kyunggi Province was selected for this study and 1:1,000 and 1:5,000 topographic maps were integrated to process breaklines and river profile data were also linked to generate DEM. The generated DEM showed relatively lower vertical accuracy from mixing 1:1,000 and 1:5,000 topographic maps since 1:1,000 topographic maps were not available for some portion of the area. However, the DEM generated demonstrated reasonable accuracy and resolution for flood map generation as well as higher cost saving effects. On the contrary, for more efficient utilization of NGIS topographic maps, periodic map updating needs to be made including technical consideration in building breaklines and applying interpolation methods.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.809-815
• /
• 2020

A number of investigations and studies have been conducted in various fields regarding the sediment disasters of Mt. Woomyeon that occurred in July 2011. We collected and compared the topographic information of the general points where debris flows did not occur and the collapse points where the debris flow occurred in order to find out the characteristics of the collapse points in Woomyeon mountain. The collected topographic information is altitude, curvature, slope, aspect and TPI(topographic position index). As a result of comparison, there were relatively many collapse points at an altitude of 210m to 250m, and at a slope of 30° to 40°. In addition, the risk of collapse was low in a cell where the curvature was close to 0, and the risk was higher in concave terrain than in convex terrain. In the case of TPI, there was no statistical difference between the general points and the collapse points when the analysis radius was larger than 200m, and there was a correlation with the curvature when the analysis radius was smaller than 50m. In the case of debris flows that are affected by artificial structures or facilities, there is a possibility of disturbing the topographic analysis results. Therefore, if a research on debris flow is conducted on a mountain area that is heavily exposed to human activities, such as Woomyeon mountain, diversified factors must be considered to account for this impact.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.541-547
• /
• 2006

With the new paradigm of ubiquitous in the developed computing technology, it is urgently necessary to research GIS fields centering around positioning techniques. The intention of this study is to propose implementation methods for integrating topographic and cadastral data. For this purpose an integrated data model is formed to coincide the graphic data of cadastral map with that of topographic map. As a result, the integrated data model could be built by harmonizing cadastral map with topographic map. We suggest data model for connecting with other information systems in the conditions of data uniformity and implementation. This data implementation models suggested in this research can provide a good reference for the future implementation of other systems. This results will be efficiently used as basis for practical use in ubiquitous environments of spatial informations.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.460-464
• /
• 2002

Multitemporal interferometric SAR has became an useful geodetic tool for monitoring Earth's surface deformation, generation of precise DEM, and land cover classification even though there still exist certain constraints such as temporal and spatial decorrelation effects, atmospheric artifacts and inaccurate orbit information. The Korea where nearly all areas are heavily vegetated, JERS-1 SAR has advantages in monitoring surface deformations and environmental changes in that it uses 4-times longer wavelength than ERS-l/2 or RADARSAT SAR system. For generating differential SAR interferogram and differential coherence image fer deformation mapping and temporal change detection, respectively, topographic phase removal process is required utilizing a reference inteferogram or external DEM simulation. Because the SAR antenna baseline parameter for JERS-1 is less accurate than those of ERS-l/2, one can not estimate topographic phases from an external DEM and the residual phase appears in differential interferogram. In this paper, we examined topographic phase retrieval method utilizing an external DEM. The baseline refinement is carried out by minimizing the differences between the measured unwrapped phase and the reference points of the DEM.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.1
• /
• pp.39-48
• /
• 2013

The solar radiation is the primary energy source that drives many of the earth's physical and biological processes and climate change. Understanding its importance to the solar radiation observation is a key to understanding a broad range of natural processes, agricultural, energy and human activities. The purpose of this study is to estimate solar radiation using sunshine duration, and to estimate distribution of solar radiation using a topography factor considering surface slope and aspect in complex terrain. The result of regression analysis between ratio of solar radiation and sunshine duration from 2001 to 2010 shows high $R^2$ value of 0.878. Regression analyses indicated that topographic attributes including elevation, slope and aspect had significant effects on solar radiation. The variation of topographic factor with aspect and slope for the summer and winter are considered. The highest month of daily mean solar radiation at Jeju island appears in April of 20.61 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$, and the lowest month appears in December of 6.90 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$. These results provided useful quantitative information about the influence of topography on solar radiation in the island region.

• The Journal of the Korea Contents Association
• /
• v.7 no.9
• /
• pp.204-211
• /
• 2007

In this study 3D topographic modeling was made by using aerial photography and digital terrain map, through this we did visibility analysis and implemented Web GIS of Dong-A university. Studying area was Busan Saha-gu Hadan-dong, we used aerial photography on a scale of 1:20,000 and digital terrain map on a scale of 1:5,000. Ortho correction image was made by aerial photography through selecting GCP, image matching, image resampling and precise differential rectification. And DEM on digital map was created using ArcView program, making 3D topographic modeling by road layer and building layer and implementing Web GIS about Dong-A university.