• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.507-514
• /
• 2015

The Spatial information research institute of the LX Korea land and geospatial informatix corporation manages infrastructure for the LX global navigation satellite system (GNSS), which comprises 30 monitoring stations nationwide. Since 2014, it has conducted network real-time kinematic (RTK) tests using the master-auxiliary concept (MAC). This study introduces the infrastructure of LX GNSS and presents the results of a performance analysis of the LX RTK service. The analysis was based on a total of 25 cadastral topographic control points in Jeonju, Seoul, and Incheon. For each point, performance was measured over one observation, two repeated observations, and five repeated observations. The measurements obtained from LX MAC and the VRS of the National Geographic Information Institute were compared with the announced coordinates derived from cadastral topographic control points. As a result, the two systems were found to have similar performance with average error and standard deviation differing only by 1 to 2 cm.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.79-89
• /
• 2015

Once the building is higher than certain size, the wind effect plays very important role in structure design. Moreover, this is more important in Korea because dangerous phenomena like typhoons are common. Rational wind resistant design is being magnified considering the global flow and climate changes. This research presented the estimation method of design wind load using spatial information analysis based on 1:5,000 digital map and performed comparative analysis with actual application cases. The wind velocity pressure exposure coefficient and topographic coefficient turned out to be more quantitative and rational when calculated through the proposed method. The time and cost are comparatively low when compared with traditional method which contribute to the economic and rational wind resistant design.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.135-144
• /
• 2017

The riverbed areas have exposed to various natural disasters and the private use by neighboring residents have caused many problems. The research objectives are to survey the actual situation of riverbed areas in order to prevent landscape damage and private use. Drone and photogrammetry, orthophoto, DSM(Digital Surface Model), digital topographic map and cadastral information have been integrated by GIS technology. The flood and disaster vulnerable area has been surveyed and the land use and private use has been analyzed using cadastral information. The research results show that the analyzed data can be used for providing foundation data for management of river and also can be used for surveying actual situation of private use on the riverbed areas.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.3
• /
• pp.30-42
• /
• 2024

In this paper, we presented the processing process of the sea floor mapping system using multi-beam echo-sounding data through actual measurements and the results of processing the multi-beam echo-sounding data obtained by exploring some waters of Yeosu Bay. Simultaneously and continuously observe the location and water depth of the sea using GNSS and multi-beam echo sounder, synchronization of the two data, depth correction process considering the tide level at the time of observation, 3D model of the seafloor, contour map, and longitudinal and cross-section data of the seafloor topography. In addition, by extracting efficiently the dredging volume according to the dredging area and planned water depth required for dredging construction management of submarine projects, it can be used for maintenance and management of marine construction sites and ports.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.903-916
• /
• 2021

An area's topography refers to the shape of the earth's surface, described by its elevation, slope, and aspect, among other features. The topographical conditions determine energy flowsthat move water and energy from higher to lower elevations, such as how much solar energy will be received and how much wind or rain will affect it. Another common factor, the topographic wetness index (TWI), is a calculation in digital elevation models of the tendency to accumulate water per slope and unit area, and is one of the most widely referenced hydrologic topographic factors, which helps explain the location of forest vegetation. Analyses of topographical factors can be calculated using a geographic information system (GIS) program based on digital elevation model (DEM) data. Recently, a large number of free open source software (FOSS) GIS programs are available and developed for researchers, industries, and governments. FOSS GIS programs provide opportunitiesfor flexible algorithms customized forspecific user needs. The majority of biodiversity in island areas exists at about 20% higher elevations than in land ecosystems, playing an important role in ecological processes and therefore of high ecological value. However, island areas are vulnerable to disturbances and damage, such as through climate change, environmental pollution, development, and human intervention, and lacks systematic investigation due to geographical limitations (e.g. remoteness; difficulty to access). More than 4,000 of Korea's islands are within a few hours of its coast, and 88% are uninhabited, with 52% of them forested. The forest ecosystems of islands have fewer encounters with human interaction than on land, and therefore most of the topographical conditions are formed naturally and affected more directly by weather conditions or the environment. Therefore, the analysis of forest topography in island areas can be done more precisely than on its land counterparts, and therefore has become a major focus of attention in Korea. This study is focused on calculating the performance of different topographical factors using FOSS GIS programs. The test area is the island forests in Korea's south and the DEM of the target area was processed with GRASS GIS and SAGA GIS. The final slopes and TWI maps were produced as comparisons of the differences between topographic factor calculations of each respective FOSS GIS program. Finally, the merits of each FOSS GIS program used to calculate the topographic factors is discussed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.13-26
• /
• 2023

Recently, as the development of underground spaces has become active due to rapid urbanization and population density, interest in the ground behavior according to the construction of underground spaces is increasing. In large cities with high population density and many buildings, ground subsidence has a great impact on structures and there may be a risk of collapse, so the analysis of ground behavior due to underground construction is essential. Previous studies have been conducted on the subsidence pattern of the surface and the deformation of the tunnel when constructing the tunnel, but analysis has rarely been conducted by using actual topographic information. Therefore, this study analyzed the difference in ground behavior between the actual topography and the flat topography. As a result, it was confirmed that ground settlement occurs at higher elevations, such as in mountainous topography, and when the numerical analysis is performed considering topographical information, the crown settlement of the tunnel is up to about approx. It showed a difference of 10 mm, and it was found that the sensitivity was less in the case of displacement of tunnel wall compared to the crown settlement and ground settlement. The numerical analysis considering the actual GIS-based topographic information presented in this study can be used to obtain more accurate surface subsidence data to understand the behavior of the upper structure due to tunnel excavation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.3
• /
• pp.1-12
• /
• 2001

This thesis represents the integrated 3D DEM using both the process of satellite image and the real value of topographic maps. This DEM is draped on satellite image processed to improve representations of the real world. The 3D visualization and 3D animation with satellite imagery data enables to depict more vivid and realistic world. The paper also describes and implements the natural environmental/ecological information system that consists of 7 modules to manage environmental data systematically through an enhanced user interface. We make use of topographic map, satellite imagery data and several thematic maps. Each module has a user interface enabling to assist particular needs of decision-making for ecological/environmental assessments associated with spatial analysis of ecosystem and classification of the environmental status quo and other purposes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.70-78
• /
• 2004

The aerial photographic mission is a difficult work because aircraft must be flown along the specified flight lines, not marked on the ground. This study has been carried out for the development of aerial photographic guidance system, which enables us to make aerial photographic task easier. Such a flight guidance system is able to display a variety of map informations in a quick and efficient way in order to guide pilot. For this purpose, we first developed the nationwide aerial navigation map database that provides the topographic map information used for topographic interpretation and aeronautical chart information used for the flight security. Next, we developed the aerial photographic guidance system which uses the aerial navigation map as base map. It is concluded that the developed system can display the various map informations quickly and do any other photographing guidance tasks well in fast moving airplane.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1310-1311
• /
• 2003

Oil Field Geographical Information System (OFGIS) manages multiple spatial data, attribute data, and topographic data, which include almost every kind of ground info rmation and underground information. Subsystems managed by OFGIS include petroleum exploration subsystem (PESS), petroleum development and engineering subsystem (PDESS), petrochemical subsystem (PCSS), petroleum storage and transportation subsystem (PSTSS), petroleum sale subsystem (PSSS), etc. A basic OFGIS framework consists of oil field infrastructure coverage (OFIC), oil field specialized information coverage (OFSIC) and oil field synthesis and decision service coverage (OFSDSC). Basic function of OFGIS includes database management, geographic information management, spatial information processing and application.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.535-540
• /
• 2005

In environmental impact assessment, noise impact assessment usually consists of three stages surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of project. When predicting noise level in urban area, this method does not consider acoustic phenomena like multi reflection, diffraction and absorption due to complex topographic configuration of building and terrains. For the purpose, a noise mapping tool is utilized to produce a series of noise maps, which are those for the present, for the works of construction and for the future. For accurate noise mapping, acoustical and topographic information is essential. Standard sound power levels and directivities of various construction equipments are required and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.